linux-dev/arch/powerpc/kernel/crash_dump.c, branch linus/master

Merge tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2022-05-28T18:27:17Z

Pull powerpc updates from Michael Ellerman: - Convert to the generic mmap support (ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT) - Add support for outline-only KASAN with 64-bit Radix MMU (P9 or later) - Increase SIGSTKSZ and MINSIGSTKSZ and add support for AT_MINSIGSTKSZ - Enable the DAWR (Data Address Watchpoint) on POWER9 DD2.3 or later - Drop support for system call instruction emulation - Many other small features and fixes Thanks to Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Bagas Sanjaya, Bjorn Helgaas, Bo Liu, Chen Huang, Christophe Leroy, Colin Ian King, Daniel Axtens, Dwaipayan Ray, Fabiano Rosas, Finn Thain, Frank Rowand, Fuqian Huang, Guilherme G. Piccoli, Hangyu Hua, Haowen Bai, Haren Myneni, Hari Bathini, He Ying, Jason Wang, Jiapeng Chong, Jing Yangyang, Joel Stanley, Julia Lawall, Kajol Jain, Kevin Hao, Krzysztof Kozlowski, Laurent Dufour, Lv Ruyi, Madhavan Srinivasan, Magali Lemes, Miaoqian Lin, Minghao Chi, Nathan Chancellor, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Oscar Salvador, Pali Rohár, Paul Mackerras, Peng Wu, Qing Wang, Randy Dunlap, Reza Arbab, Russell Currey, Sohaib Mohamed, Vaibhav Jain, Vasant Hegde, Wang Qing, Wang Wensheng, Xiang wangx, Xiaomeng Tong, Xu Wang, Yang Guang, Yang Li, Ye Bin, YueHaibing, Yu Kuai, Zheng Bin, Zou Wei, and Zucheng Zheng. * tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits) powerpc/64: Include cache.h directly in paca.h powerpc/64s: Only set HAVE_ARCH_UNMAPPED_AREA when CONFIG_PPC_64S_HASH_MMU is set powerpc/xics: Include missing header powerpc/powernv/pci: Drop VF MPS fixup powerpc/fsl_book3e: Don't set rodata RO too early powerpc/microwatt: Add mmu bits to device tree powerpc/powernv/flash: Check OPAL flash calls exist before using powerpc/powermac: constify device_node in of_irq_parse_oldworld() powerpc/powermac: add missing g5_phy_disable_cpu1() declaration selftests/powerpc/pmu: fix spelling mistake "mis-match" -> "mismatch" powerpc: Enable the DAWR on POWER9 DD2.3 and above powerpc/64s: Add CPU_FTRS_POWER10 to ALWAYS mask powerpc/64s: Add CPU_FTRS_POWER9_DD2_2 to CPU_FTRS_ALWAYS mask powerpc: Fix all occurences of "the the" selftests/powerpc/pmu/ebb: remove fixed_instruction.S powerpc/platforms/83xx: Use of_device_get_match_data() powerpc/eeh: Drop redundant spinlock initialization powerpc/iommu: Add missing of_node_put in iommu_init_early_dart powerpc/pseries/vas: Call misc_deregister if sysfs init fails powerpc/papr_scm: Fix leaking nvdimm_events_map elements ...

powerpc: Add missing headers

2022-05-08T12:15:40Z

Don't inherit headers "by chances" from asm/prom.h, asm/mpc52xx.h, asm/pci.h etc... Include the needed headers, and remove asm/prom.h when it was needed exclusively for pulling necessary headers. Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/be8bdc934d152a7d8ee8d1a840d5596e2f7d85e0.1646767214.git.christophe.leroy@csgroup.eu

vmcore: convert copy_oldmem_page() to take an iov_iter

2022-04-29T21:37:59Z

Patch series "Convert vmcore to use an iov_iter", v5. For some reason several people have been sending bad patches to fix compiler warnings in vmcore recently. Here's how it should be done. Compile-tested only on x86. As noted in the first patch, s390 should take this conversion a bit further, but I'm not inclined to do that work myself. This patch (of 3): Instead of passing in a 'buf' and 'userbuf' argument, pass in an iov_iter. s390 needs more work to pass the iov_iter down further, or refactor, but I'd be more comfortable if someone who can test on s390 did that work. It's more convenient to convert the whole of read_from_oldmem() to take an iov_iter at the same time, so rename it to read_from_oldmem_iter() and add a temporary read_from_oldmem() wrapper that creates an iov_iter. Link: https://lkml.kernel.org/r/20220408090636.560886-1-bhe@redhat.com Link: https://lkml.kernel.org/r/20220408090636.560886-2-bhe@redhat.com Signed-off-by: Matthew Wilcox (Oracle) Signed-off-by: Baoquan He Reviewed-by: Christoph Hellwig Cc: Heiko Carstens Signed-off-by: Andrew Morton

powerpc: Don't use 'struct ppc_inst' to reference instruction location

2021-06-16T14:09:00Z

'struct ppc_inst' is an internal representation of an instruction, but in-memory instructions are and will remain a table of 'u32' forever. Replace all 'struct ppc_inst *' used for locating an instruction in memory by 'u32 *'. This removes a lot of undue casts to 'struct ppc_inst *'. It also helps locating ab-use of 'struct ppc_inst' dereference. Signed-off-by: Christophe Leroy [mpe: Fix ppc_inst_next(), use u32 instead of unsigned int] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/7062722b087228e42cbd896e39bfdf526d6a340a.1621516826.git.christophe.leroy@csgroup.eu

powerpc: Replace PPC_INST_NOP by PPC_RAW_NOP()

2021-06-15T14:16:49Z

On the road to removing all PPC_INST_xx defines in asm/ppc-opcodes.h, change PPC_INST_NOP to PPC_RAW_NOP(). Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/ad46c195ca1b8572629ef07ba6bfe247585239a6.1621506159.git.christophe.leroy@csgroup.eu

powerpc: Add prefixed instructions to instruction data type

2020-05-18T14:10:39Z

For powerpc64, redefine the ppc_inst type so both word and prefixed instructions can be represented. On powerpc32 the type will remain the same. Update places which had assumed instructions to be 4 bytes long. Signed-off-by: Jordan Niethe Reviewed-by: Alistair Popple [mpe: Rework the get_user_inst() macros to be parameterised, and don't assign to the dest if an error occurred. Use CONFIG_PPC64 not __powerpc64__ in a few places. Address other comments from Christophe. Fix some sparse complaints.] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200506034050.24806-24-jniethe5@gmail.com

powerpc: Use a datatype for instructions

2020-05-18T14:10:37Z

Currently unsigned ints are used to represent instructions on powerpc. This has worked well as instructions have always been 4 byte words. However, ISA v3.1 introduces some changes to instructions that mean this scheme will no longer work as well. This change is Prefixed Instructions. A prefixed instruction is made up of a word prefix followed by a word suffix to make an 8 byte double word instruction. No matter the endianness of the system the prefix always comes first. Prefixed instructions are only planned for powerpc64. Introduce a ppc_inst type to represent both prefixed and word instructions on powerpc64 while keeping it possible to exclusively have word instructions on powerpc32. Signed-off-by: Jordan Niethe [mpe: Fix compile error in emulate_spe()] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200506034050.24806-12-jniethe5@gmail.com

powerpc: Use a macro for creating instructions from u32s

2020-05-18T14:10:36Z

In preparation for instructions having a more complex data type start using a macro, ppc_inst(), for making an instruction out of a u32. A macro is used so that instructions can be used as initializer elements. Currently this does nothing, but it will allow for creating a data type that can represent prefixed instructions. Signed-off-by: Jordan Niethe [mpe: Change include guard to _ASM_POWERPC_INST_H] Signed-off-by: Michael Ellerman Reviewed-by: Alistair Popple Link: https://lore.kernel.org/r/20200506034050.24806-7-jniethe5@gmail.com

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 230

2019-06-19T15:09:06Z

Based on 2 normalized pattern(s): this source code is licensed under the gnu general public license version 2 see the file copying for more details this source code is licensed under general public license version 2 see extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 52 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Allison Randal Reviewed-by: Alexios Zavras Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.449021192@linutronix.de Signed-off-by: Greg Kroah-Hartman

powerpc: don't use ioremap_prot() nor __ioremap() unless really needed.

2018-10-14T07:04:09Z

In many places, ioremap_prot() and __ioremap() can be replaced with higher level functions like ioremap(), ioremap_coherent(), ioremap_cache(), ioremap_wc() ... Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman