linux-dev/arch/powerpc/kernel/smp.c, branch linus/master

powerpc: Fix all occurences of "the the"

2022-05-22T05:59:43Z

Rather than waiting for the bots to fix these one-by-one, fix all occurences of "the the" throughout arch/powerpc. Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220518142629.513007-1-mpe@ellerman.id.au

powerpc/kasan: Don't instrument non-maskable or raw interrupts

2022-05-22T05:58:29Z

Disable address sanitization for raw and non-maskable interrupt handlers, because they can run in real mode, where we cannot access the shadow memory. (Note that kasan_arch_is_ready() doesn't test for real mode, since it is a static branch for speed, and in any case not all the entry points to the generic KASAN code are protected by kasan_arch_is_ready guards.) The changes to interrupt_nmi_enter/exit_prepare() look larger than they actually are. The changes are equivalent to adding !IS_ENABLED(CONFIG_KASAN) to the conditions for calling nmi_enter() or nmi_exit() in real mode. That is, the code is equivalent to using the following condition for calling nmi_enter/exit: if (((!IS_ENABLED(CONFIG_PPC_BOOK3S_64) || !firmware_has_feature(FW_FEATURE_LPAR) || radix_enabled()) && !IS_ENABLED(CONFIG_KASAN) || (mfmsr() & MSR_DR)) That unwieldy condition has been split into several statements with comments, for easier reading. The nmi_ipi_lock functions that call atomic functions (i.e., nmi_ipi_lock_start(), nmi_ipi_lock() and nmi_ipi_unlock()), besides being marked noinstr, now call arch_atomic_* functions instead of atomic_* functions because with KASAN enabled, the atomic_* functions are wrappers which explicitly do address sanitization on their arguments. Since we are trying to avoid address sanitization, we have to use the lower-level arch_atomic_* versions. In hv_nmi_check_nonrecoverable(), the regs_set_unrecoverable() call has been open-coded so as to avoid having to either trust the inlining or mark regs_set_unrecoverable() as noinstr. [paulus@ozlabs.org: combined a few work-in-progress commits of Daniel's and wrote the commit message.] Signed-off-by: Daniel Axtens Signed-off-by: Paul Mackerras Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/YoTFGaKM8Pd46PIK@cleo

powerpc: Remove asm/prom.h from all files that don't need it

2022-05-08T12:15:04Z

Several files include asm/prom.h for no reason. Clean it up. Signed-off-by: Christophe Leroy [mpe: Drop change to prom_parse.c as reported by lkp@intel.com] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/7c9b8fda63dcf63e1b28f43e7ebdb95182cbc286.1646767214.git.christophe.leroy@csgroup.eu

powerpc: fix typos in comments

2022-05-05T12:12:44Z

Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall Reviewed-by: Joel Stanley Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220430185654.5855-1-Julia.Lawall@inria.fr

powerpc: Move C prototypes out of asm-prototypes.h

2022-03-08T11:06:25Z

We originally added asm-prototypes.h in commit 42f5b4cacd78 ("powerpc: Introduce asm-prototypes.h"). It's purpose was for prototypes of C functions that are only called from asm, in order to fix sparse warnings about missing prototypes. A few months later Nick added a different use case in commit 4efca4ed05cb ("kbuild: modversions for EXPORT_SYMBOL() for asm") for C prototypes for exported asm functions. This is basically the inverse of our original usage. Since then we've added various prototypes to asm-prototypes.h for both reasons, meaning we now need to unstitch it all. Dispatch prototypes of C functions into relevant headers and keep only the prototypes for functions defined in assembly. For the time being, leave prom_init() there because moving it into asm/prom.h or asm/setup.h conflicts with drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowrom.o This will be fixed later by untaggling asm/pci.h and asm/prom.h or by renaming the function in shadowrom.c Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/62d46904eca74042097acf4cb12c175e3067f3d1.1646413435.git.christophe.leroy@csgroup.eu

powerpc/smp: Declare current_set static

2022-03-07T13:05:01Z

current_set extern not needed anymore since commit eafd825ed710 ("powerpc/64: Simplify __secondary_start paca->kstack handling") Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/a55eb65c9d7319f0af3c31e3f6ba36522f10003d.1646413435.git.christophe.leroy@csgroup.eu

powerpc/kernel: Add __init attribute to eligible functions

2021-12-23T11:33:10Z

Some functions defined in `arch/powerpc/kernel` (and one in `arch/powerpc/ kexec`) are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211216220035.605465-2-nick.child@ibm.com

powerpc/fadump: Fix inaccurate CPU state info in vmcore generated with panic

2021-12-09T11:41:22Z

In panic path, fadump is triggered via a panic notifier function. Before calling panic notifier functions, smp_send_stop() gets called, which stops all CPUs except the panic'ing CPU. Commit 8389b37dffdc ("powerpc: stop_this_cpu: remove the cpu from the online map.") and again commit bab26238bbd4 ("powerpc: Offline CPU in stop_this_cpu()") started marking CPUs as offline while stopping them. So, if a kernel has either of the above commits, vmcore captured with fadump via panic path would not process register data for all CPUs except the panic'ing CPU. Sample output of crash-utility with such vmcore: # crash vmlinux vmcore ... KERNEL: vmlinux DUMPFILE: vmcore [PARTIAL DUMP] CPUS: 1 DATE: Wed Nov 10 09:56:34 EST 2021 UPTIME: 00:00:42 LOAD AVERAGE: 2.27, 0.69, 0.24 TASKS: 183 NODENAME: XXXXXXXXX RELEASE: 5.15.0+ VERSION: #974 SMP Wed Nov 10 04:18:19 CST 2021 MACHINE: ppc64le (2500 Mhz) MEMORY: 8 GB PANIC: "Kernel panic - not syncing: sysrq triggered crash" PID: 3394 COMMAND: "bash" TASK: c0000000150a5f80 [THREAD_INFO: c0000000150a5f80] CPU: 1 STATE: TASK_RUNNING (PANIC) crash> p -x __cpu_online_mask __cpu_online_mask = $1 = { bits = {0x2, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0} } crash> crash> crash> p -x __cpu_active_mask __cpu_active_mask = $2 = { bits = {0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0} } crash> While this has been the case since fadump was introduced, the issue was not identified for two probable reasons: - In general, the bulk of the vmcores analyzed were from crash due to exception. - The above did change since commit 8341f2f222d7 ("sysrq: Use panic() to force a crash") started using panic() instead of deferencing NULL pointer to force a kernel crash. But then commit de6e5d38417e ("powerpc: smp_send_stop do not offline stopped CPUs") stopped marking CPUs as offline till kernel commit bab26238bbd4 ("powerpc: Offline CPU in stop_this_cpu()") reverted that change. To ensure post processing register data of all other CPUs happens as intended, let panic() function take the crash friendly path (read crash_smp_send_stop()) with the help of crash_kexec_post_notifiers option. Also, as register data for all CPUs is captured by f/w, skip IPI callbacks here for fadump, to avoid any complications in finding the right backtraces. Signed-off-by: Hari Bathini Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211207103719.91117-2-hbathini@linux.ibm.com

powerpc: handle kdump appropriately with crash_kexec_post_notifiers option

2021-12-09T11:41:22Z

Kdump can be triggered after panic_notifers since commit f06e5153f4ae2 ("kernel/panic.c: add "crash_kexec_post_notifiers" option for kdump after panic_notifers") introduced crash_kexec_post_notifiers option. But using this option would mean smp_send_stop(), that marks all other CPUs as offline, gets called before kdump is triggered. As a result, kdump routines fail to save other CPUs' registers. To fix this, kdump friendly crash_smp_send_stop() function was introduced with kernel commit 0ee59413c967 ("x86/panic: replace smp_send_stop() with kdump friendly version in panic path"). Override this kdump friendly weak function to handle crash_kexec_post_notifiers option appropriately on powerpc. Reported-by: kernel test robot Signed-off-by: Hari Bathini [Fixed signature of crash_stop_this_cpu() - reported by lkp@intel.com] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211207103719.91117-1-hbathini@linux.ibm.com

powerpc/smp: Move setup_profiling_timer() under CONFIG_PROFILING

2021-11-29T11:49:23Z

setup_profiling_timer() is only needed when CONFIG_PROFILING is enabled. Fixes the following W=1 warning when CONFIG_PROFILING=n: linux/arch/powerpc/kernel/smp.c:1638:5: error: no previous prototype for ‘setup_profiling_timer’ Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211124093254.1054750-5-mpe@ellerman.id.au