linux-dev/arch/powerpc/kernel/traps.c, branch linus/master

powerpc/kasan: Don't instrument non-maskable or raw interrupts

2022-05-22T05:58:29Z

Disable address sanitization for raw and non-maskable interrupt handlers, because they can run in real mode, where we cannot access the shadow memory. (Note that kasan_arch_is_ready() doesn't test for real mode, since it is a static branch for speed, and in any case not all the entry points to the generic KASAN code are protected by kasan_arch_is_ready guards.) The changes to interrupt_nmi_enter/exit_prepare() look larger than they actually are. The changes are equivalent to adding !IS_ENABLED(CONFIG_KASAN) to the conditions for calling nmi_enter() or nmi_exit() in real mode. That is, the code is equivalent to using the following condition for calling nmi_enter/exit: if (((!IS_ENABLED(CONFIG_PPC_BOOK3S_64) || !firmware_has_feature(FW_FEATURE_LPAR) || radix_enabled()) && !IS_ENABLED(CONFIG_KASAN) || (mfmsr() & MSR_DR)) That unwieldy condition has been split into several statements with comments, for easier reading. The nmi_ipi_lock functions that call atomic functions (i.e., nmi_ipi_lock_start(), nmi_ipi_lock() and nmi_ipi_unlock()), besides being marked noinstr, now call arch_atomic_* functions instead of atomic_* functions because with KASAN enabled, the atomic_* functions are wrappers which explicitly do address sanitization on their arguments. Since we are trying to avoid address sanitization, we have to use the lower-level arch_atomic_* versions. In hv_nmi_check_nonrecoverable(), the regs_set_unrecoverable() call has been open-coded so as to avoid having to either trust the inlining or mark regs_set_unrecoverable() as noinstr. [paulus@ozlabs.org: combined a few work-in-progress commits of Daniel's and wrote the commit message.] Signed-off-by: Daniel Axtens Signed-off-by: Paul Mackerras Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/YoTFGaKM8Pd46PIK@cleo

exit: Add and use make_task_dead.

2021-12-13T18:04:45Z

There are two big uses of do_exit. The first is it's design use to be the guts of the exit(2) system call. The second use is to terminate a task after something catastrophic has happened like a NULL pointer in kernel code. Add a function make_task_dead that is initialy exactly the same as do_exit to cover the cases where do_exit is called to handle catastrophic failure. In time this can probably be reduced to just a light wrapper around do_task_dead. For now keep it exactly the same so that there will be no behavioral differences introducing this new concept. Replace all of the uses of do_exit that use it for catastraphic task cleanup with make_task_dead to make it clear what the code is doing. As part of this rename rewind_stack_do_exit rewind_stack_and_make_dead. Signed-off-by: "Eric W. Biederman"

powerpc/64s: Fix unrecoverable MCE calling async handler from NMI

2021-10-07T08:54:55Z

The machine check handler is not considered NMI on 64s. The early handler is the true NMI handler, and then it schedules the machine_check_exception handler to run when interrupts are enabled. This works fine except the case of an unrecoverable MCE, where the true NMI is taken when MSR[RI] is clear, it can not recover, so it calls machine_check_exception directly so something might be done about it. Calling an async handler from NMI context can result in irq state and other things getting corrupted. This can also trigger the BUG at arch/powerpc/include/asm/interrupt.h:168 BUG_ON(!arch_irq_disabled_regs(regs) && !(regs->msr & MSR_EE)); Fix this by making an _async version of the handler which is called in the normal case, and a NMI version that is called for unrecoverable interrupts. Fixes: 2b43dd7653cc ("powerpc/64: enable MSR[EE] in irq replay pt_regs") Signed-off-by: Nicholas Piggin Tested-by: Cédric Le Goater Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211004145642.1331214-6-npiggin@gmail.com

powerpc/traps: do not enable irqs in _exception

2021-10-07T08:54:54Z

_exception can be called by machine check handlers when the MCE hits user code (e.g., pseries and powernv). This will enable local irqs because, which is a dicey thing to do in NMI or hard irq context. This seemed to worked out okay because a userspace MCE can basically be treated like a synchronous interrupt (after async / imprecise MCEs are filtered out). Since NMI and hard irq handlers have started growing nmi_enter / irq_enter, and more irq state sanity checks, this has started to cause problems (or at least trigger warnings). The Fixes tag to the commit which introduced this rather than try to work out exactly which commit was the first that could possibly cause a problem because that may be difficult to prove. Fixes: 9f2f79e3a3c1 ("powerpc: Disable interrupts in 64-bit kernel FP and vector faults") Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211004145642.1331214-3-npiggin@gmail.com

Merge branch 'akpm' (patches from Andrew)

2021-09-08T19:55:35Z

Merge more updates from Andrew Morton: "147 patches, based on 7d2a07b769330c34b4deabeed939325c77a7ec2f. Subsystems affected by this patch series: mm (memory-hotplug, rmap, ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan), alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib, checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig, selftests, ipc, and scripts" * emailed patches from Andrew Morton : (94 commits) scripts: check_extable: fix typo in user error message mm/workingset: correct kernel-doc notations ipc: replace costly bailout check in sysvipc_find_ipc() selftests/memfd: remove unused variable Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH configs: remove the obsolete CONFIG_INPUT_POLLDEV prctl: allow to setup brk for et_dyn executables pid: cleanup the stale comment mentioning pidmap_init(). kernel/fork.c: unexport get_{mm,task}_exe_file coredump: fix memleak in dump_vma_snapshot() fs/coredump.c: log if a core dump is aborted due to changed file permissions nilfs2: use refcount_dec_and_lock() to fix potential UAF nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group nilfs2: fix NULL pointer in nilfs_##name##_attr_release nilfs2: fix memory leak in nilfs_sysfs_create_device_group trap: cleanup trap_init() init: move usermodehelper_enable() to populate_rootfs() ...

trap: cleanup trap_init()

2021-09-08T18:50:27Z

There are some empty trap_init() definitions in different ARCHs, Introduce a new weak trap_init() function to clean them up. Link: https://lkml.kernel.org/r/20210812123602.76356-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang Acked-by: Russell King (Oracle) [arm32] Acked-by: Vineet Gupta [arc] Acked-by: Michael Ellerman [powerpc] Cc: Yoshinori Sato Cc: Ley Foon Tan Cc: Jonas Bonn Cc: Stefan Kristiansson Cc: Stafford Horne Cc: James E.J. Bottomley Cc: Helge Deller Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Paul Walmsley Cc: Jeff Dike Cc: Richard Weinberger Cc: Anton Ivanov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2021-09-03T18:22:50Z

Pull powerpc updates from Michael Ellerman: - Convert pseries & powernv to use MSI IRQ domains. - Rework the pseries CPU numbering so that CPUs that are removed, and later re-added, are given a CPU number on the same node as previously, when possible. - Add support for a new more flexible device-tree format for specifying NUMA distances. - Convert powerpc to GENERIC_PTDUMP. - Retire sbc8548 and sbc8641d board support. - Various other small features and fixes. Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard, Cédric Le Goater, Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas, Fangrui Song, Finn Thain, Gautham R. Shenoy, Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo Bras, Lukas Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan Chancellor, Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R. Sampat, Randy Dunlap, Sebastian Andrzej Siewior, Srikar Dronamraju, Wan Jiabing, Xiongwei Song, and Zheng Yongjun. * tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (154 commits) powerpc/bug: Cast to unsigned long before passing to inline asm powerpc/ptdump: Fix generic ptdump for 64-bit KVM: PPC: Fix clearing never mapped TCEs in realmode powerpc/pseries/iommu: Rename "direct window" to "dma window" powerpc/pseries/iommu: Make use of DDW for indirect mapping powerpc/pseries/iommu: Find existing DDW with given property name powerpc/pseries/iommu: Update remove_dma_window() to accept property name powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper powerpc/pseries/iommu: Add ddw_property_create() and refactor enable_ddw() powerpc/pseries/iommu: Allow DDW windows starting at 0x00 powerpc/pseries/iommu: Add ddw_list_new_entry() helper powerpc/pseries/iommu: Add iommu_pseries_alloc_table() helper powerpc/kernel/iommu: Add new iommu_table_in_use() helper powerpc/pseries/iommu: Replace hard-coded page shift powerpc/numa: Update cpu_cpu_map on CPU online/offline powerpc/numa: Print debug statements only when required powerpc/numa: convert printk to pr_xxx powerpc/numa: Drop dbg in favour of pr_debug powerpc/smp: Enable CACHE domain for shared processor powerpc/smp: Update cpu_core_map on all PowerPc systems ...

Merge branch 'fixes' into next

2021-09-03T12:54:12Z

Merge our fixes branch into next. That lets us resolve a conflict in arch/powerpc/sysdev/xive/common.c. Between cbc06f051c52 ("powerpc/xive: Do not skip CPU-less nodes when creating the IPIs"), which moved request_irq() out of xive_init_ipis(), and 17df41fec5b8 ("powerpc: use IRQF_NO_DEBUG for IPIs") which added IRQF_NO_DEBUG to that request_irq() call, which has now moved.

Merge tag 'printk-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux

2021-09-02T01:41:13Z

Pull printk updates from Petr Mladek: - Optionally, provide an index of possible printk messages via /printk/index/. It can be used when monitoring important kernel messages on a farm of various hosts. The monitor has to be updated when some messages has changed or are not longer available by a newly deployed kernel. - Add printk.console_no_auto_verbose boot parameter. It allows to generate crash dump even with slow consoles in a reasonable time frame. - Remove printk_safe buffers. The messages are always stored directly to the main logbuffer, even in NMI or recursive context. Also it allows to serialize syslog operations by a mutex instead of a spin lock. - Misc clean up and build fixes. * tag 'printk-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk/index: Fix -Wunused-function warning lib/nmi_backtrace: Serialize even messages about idle CPUs printk: Add printk.console_no_auto_verbose boot parameter printk: Remove console_silent() lib/test_scanf: Handle n_bits == 0 in random tests printk: syslog: close window between wait and read printk: convert @syslog_lock to mutex printk: remove NMI tracking printk: remove safe buffers printk: track/limit recursion lib/nmi_backtrace: explicitly serialize banner and regs printk: Move the printk() kerneldoc comment to its new home printk/index: Fix warning about missing prototypes MIPS/asm/printk: Fix build failure caused by printk printk: index: Add indexing support to dev_printk printk: Userspace format indexing support printk: Rework parse_prefix into printk_parse_prefix printk: Straighten out log_flags into printk_info_flags string_helpers: Escape double quotes in escape_special printk/console: Check consistent sequence number when handling race in console_unlock()

Merge branch 'rework/printk_safe-removal' into for-linus

2021-08-30T14:36:10Z