linux-dev/arch/powerpc/mm/fault.c, branch linus/master

powerpc: Move C prototypes out of asm-prototypes.h

2022-03-08T11:06:25Z

We originally added asm-prototypes.h in commit 42f5b4cacd78 ("powerpc: Introduce asm-prototypes.h"). It's purpose was for prototypes of C functions that are only called from asm, in order to fix sparse warnings about missing prototypes. A few months later Nick added a different use case in commit 4efca4ed05cb ("kbuild: modversions for EXPORT_SYMBOL() for asm") for C prototypes for exported asm functions. This is basically the inverse of our original usage. Since then we've added various prototypes to asm-prototypes.h for both reasons, meaning we now need to unstitch it all. Dispatch prototypes of C functions into relevant headers and keep only the prototypes for functions defined in assembly. For the time being, leave prom_init() there because moving it into asm/prom.h or asm/setup.h conflicts with drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowrom.o This will be fixed later by untaggling asm/pci.h and asm/prom.h or by renaming the function in shadowrom.c Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/62d46904eca74042097acf4cb12c175e3067f3d1.1646413435.git.christophe.leroy@csgroup.eu

powerpc/64s: Don't use DSISR for SLB faults

2022-03-07T13:04:56Z

Since commit 46ddcb3950a2 ("powerpc/mm: Show if a bad page fault on data is read or write.") we use page_fault_is_write(regs->dsisr) in __bad_page_fault() to determine if the fault is for a read or write, and change the message printed accordingly. But SLB faults, aka Data Segment Interrupts, don't set DSISR (Data Storage Interrupt Status Register) to a useful value. All ISA versions from v2.03 through v3.1 specify that the Data Segment Interrupt sets DSISR "to an undefined value". As far as I can see there's no mention of SLB faults setting DSISR in any BookIV content either. This manifests as accesses that should be a read being incorrectly reported as writes, for example, using the xmon "dump" command: 0:mon> d 0x5deadbeef0000000 5deadbeef0000000 [359526.415354][ C6] BUG: Unable to handle kernel data access on write at 0x5deadbeef0000000 [359526.415611][ C6] Faulting instruction address: 0xc00000000010a300 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf400] pc: c00000000010a300: mread+0x90/0x190 If we disassemble the PC, we see a load instruction: 0:mon> di c00000000010a300 c00000000010a300 89490000 lbz r10,0(r9) We can also see in exceptions-64s.S that the data_access_slb block doesn't set IDSISR=1, which means it doesn't load DSISR into pt_regs. So the value we're using to determine if the fault is a read/write is some stale value in pt_regs from a previous page fault. Rework the printing logic to separate the SLB fault case out, and only print read/write in the cases where we can determine it. The result looks like eg: 0:mon> d 0x5deadbeef0000000 5deadbeef0000000 [ 721.779525][ C6] BUG: Unable to handle kernel data access at 0x5deadbeef0000000 [ 721.779697][ C6] Faulting instruction address: 0xc00000000014cbe0 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf390] 0:mon> d 0 0000000000000000 [ 742.793242][ C6] BUG: Kernel NULL pointer dereference at 0x00000000 [ 742.793316][ C6] Faulting instruction address: 0xc00000000014cbe0 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf390] Fixes: 46ddcb3950a2 ("powerpc/mm: Show if a bad page fault on data is read or write.") Reported-by: Nageswara R Sastry Signed-off-by: Michael Ellerman Reviewed-by: Nicholas Piggin Link: https://lore.kernel.org/r/20220222113449.319193-1-mpe@ellerman.id.au

Merge branch 'akpm' (patches from Andrew)

2022-01-15T18:37:06Z

Merge misc updates from Andrew Morton: "146 patches. Subsystems affected by this patch series: kthread, ia64, scripts, ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak, dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap, memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb, userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp, ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and damon)" * emailed patches from Andrew Morton : (146 commits) mm/damon: hide kernel pointer from tracepoint event mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging mm/damon/dbgfs: remove an unnecessary variable mm/damon: move the implementation of damon_insert_region to damon.h mm/damon: add access checking for hugetlb pages Docs/admin-guide/mm/damon/usage: update for schemes statistics mm/damon/dbgfs: support all DAMOS stats Docs/admin-guide/mm/damon/reclaim: document statistics parameters mm/damon/reclaim: provide reclamation statistics mm/damon/schemes: account how many times quota limit has exceeded mm/damon/schemes: account scheme actions that successfully applied mm/damon: remove a mistakenly added comment for a future feature Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning Docs/admin-guide/mm/damon/usage: remove redundant information Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks mm/damon: convert macro functions to static inline functions mm/damon: modify damon_rand() macro to static inline function mm/damon: move damon_rand() definition into damon.h ...

mm: remove redundant check about FAULT_FLAG_ALLOW_RETRY bit

2022-01-15T14:30:27Z

Since commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple times") allowed VM_FAULT_RETRY for multiple times, the FAULT_FLAG_ALLOW_RETRY bit of fault_flag will not be changed in the page fault path, so the following check is no longer needed: flags & FAULT_FLAG_ALLOW_RETRY So just remove it. [akpm@linux-foundation.org: coding style fixes] Link: https://lkml.kernel.org/r/20211110123358.36511-1-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng Cc: Peter Zijlstra Cc: Ingo Molnar Cc: David Hildenbrand Cc: Kirill Shutemov Cc: Peter Xu Cc: Muchun Song Cc: Chengming Zhou Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

powerpc/64s: Move and rename do_bad_slb_fault as it is not hash specific

2021-12-02T11:57:23Z

slb.c is hash-specific SLB management, but do_bad_slb_fault deals with segment interrupts that occur with radix MMU as well. Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211201144153.2456614-5-npiggin@gmail.com

powerpc/mm: Fix lockup on kernel exec fault

2021-07-05T12:23:24Z

The powerpc kernel is not prepared to handle exec faults from kernel. Especially, the function is_exec_fault() will return 'false' when an exec fault is taken by kernel, because the check is based on reading current->thread.regs->trap which contains the trap from user. For instance, when provoking a LKDTM EXEC_USERSPACE test, current->thread.regs->trap is set to SYSCALL trap (0xc00), and the fault taken by the kernel is not seen as an exec fault by set_access_flags_filter(). Commit d7df2443cd5f ("powerpc/mm: Fix spurious segfaults on radix with autonuma") made it clear and handled it properly. But later on commit d3ca587404b3 ("powerpc/mm: Fix reporting of kernel execute faults") removed that handling, introducing test based on error_code. And here is the problem, because on the 603 all upper bits of SRR1 get cleared when the TLB instruction miss handler bails out to ISI. Until commit cbd7e6ca0210 ("powerpc/fault: Avoid heavy search_exception_tables() verification"), an exec fault from kernel at a userspace address was indirectly caught by the lack of entry for that address in the exception tables. But after that commit the kernel mainly relies on KUAP or on core mm handling to catch wrong user accesses. Here the access is not wrong, so mm handles it. It is a minor fault because PAGE_EXEC is not set, set_access_flags_filter() should set PAGE_EXEC and voila. But as is_exec_fault() returns false as explained in the beginning, set_access_flags_filter() bails out without setting PAGE_EXEC flag, which leads to a forever minor exec fault. As the kernel is not prepared to handle such exec faults, the thing to do is to fire in bad_kernel_fault() for any exec fault taken by the kernel, as it was prior to commit d3ca587404b3. Fixes: d3ca587404b3 ("powerpc/mm: Fix reporting of kernel execute faults") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Christophe Leroy Acked-by: Nicholas Piggin Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/024bb05105050f704743a0083fe3548702be5706.1625138205.git.christophe.leroy@csgroup.eu

powerpc/traps: Enhance readability for trap types

2021-04-17T12:20:19Z

Define macros to list ppc interrupt types in interttupt.h, replace the reference of the trap hex values with these macros. Referred the hex numbers in arch/powerpc/kernel/exceptions-64e.S, arch/powerpc/kernel/exceptions-64s.S, arch/powerpc/kernel/head_*.S, arch/powerpc/kernel/head_booke.h and arch/powerpc/include/asm/kvm_asm.h. Signed-off-by: Xiongwei Song [mpe: Resolve conflicts in nmi_disables_ftrace(), fix 40x build] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/1618398033-13025-1-git-send-email-sxwjean@me.com

powerpc: clean up do_page_fault

2021-04-14T13:04:44Z

search_exception_tables + __bad_page_fault can be substituted with bad_page_fault, do_page_fault no longer needs to return a value to asm for any sub-architecture, and __bad_page_fault can be static. Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20210316104206.407354-10-npiggin@gmail.com

powerpc/64e/interrupt: handle bad_page_fault in C

2021-04-14T13:04:43Z

With non-volatile registers saved on interrupt, bad_page_fault can now be called by do_page_fault. Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20210316104206.407354-9-npiggin@gmail.com

powerpc/mm: Remove unneeded #ifdef CONFIG_PPC_MEM_KEYS

2021-03-29T02:22:15Z

In fault.c, #ifdef CONFIG_PPC_MEM_KEYS is not needed because all functions are always defined, and arch_vma_access_permitted() always returns true when CONFIG_PPC_MEM_KEYS is not defined so access_pkey_error() will return false so bad_access_pkey() will never be called. Include linux/pkeys.h to get a definition of vma_pkeys() for bad_access_pkey(). Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/8038392f38d81f2ad169347efac29146f553b238.1615819955.git.christophe.leroy@csgroup.eu