Linux kernel development work - see feature branches https://git.zx2c4.com/linux-dev/atom/arch/powerpc/platforms?h=master 2022-10-18T11:46:18Z 2022-10-18T11:46:18Z Haren Myneni haren@linux.ibm.com 2022-10-07T05:29:59Z urn:sha1:2147783d6bf0b7ca14c72a25527dc5135bd17f65 The hypervisor assigns VAS (Virtual Accelerator Switchboard) windows depends on cores configured in LPAR. The kernel uses OF reconfig notifier to reconfig VAS windows for DLPAR CPU event. In the case of shared CPU mode partition, the hypervisor assigns VAS windows depends on CPU entitled capacity, not based on vcpus. When the user changes CPU entitled capacity for the partition, drmgr uses /proc/ppc64/lparcfg interface to notify the kernel. This patch adds the following changes to update VAS resources for shared mode: - Call vas reconfig windows from lparcfg_write() - Ignore reconfig changes in the VAS notifier Signed-off-by: Haren Myneni <haren@linux.ibm.com> [mpe: Rework error handling, report any errors as EIO] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/efa9c16e4a78dda4567a16f13dabfd73cb4674a2.camel@linux.ibm.com 2022-10-18T11:46:18Z Haren Myneni haren@linux.ibm.com 2022-10-10T03:41:25Z urn:sha1:89ed0b769d6adf30364f60e6b1566961821a9893 irq_default_primary_handler() can be used only with IRQF_ONESHOT flag, but the flag disables IRQ before executing the thread handler and enables it after the interrupt is handled. But this IRQ disable sets the VAS IRQ OFF state in the hypervisor. In case if NX faults during this window, the hypervisor will not deliver the fault interrupt to the partition and the user space may wait continuously for the CSB update. So use VAS specific IRQ handler instead of calling the default primary handler. Increment pending_faults counter in IRQ handler and the bottom thread handler will process all faults based on this counter. In case if the another interrupt is received while the thread is running, it will be processed using this counter. The synchronization of top and bottom handlers will be done with IRQTF_RUNTHREAD flag and will re-enter to bottom half if this flag is set. Signed-off-by: Haren Myneni <haren@linux.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/aaad8813b4762a6753cfcd0b605a7574a5192ec7.camel@linux.ibm.com 2022-10-13T11:30:07Z Nicholas Piggin npiggin@gmail.com 2022-10-13T07:31:31Z urn:sha1:90d5ce82e143b42b2fdfb95401a89f86b71cedb7 The recently moved dtl code must be compiled-in if CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y even if CONFIG_DTL=n. Fixes: 6ba5aa541aaa0 ("powerpc/pseries: Move dtl scanning and steal time accounting to pseries platform") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221013073131.1485742-1-npiggin@gmail.com 2022-10-09T21:05:15Z Linus Torvalds torvalds@linux-foundation.org 2022-10-09T21:05:15Z urn:sha1:4899a36f91a9f9b06878471096bd143e7253006d Pull powerpc updates from Michael Ellerman: - Remove our now never-true definitions for pgd_huge() and p4d_leaf(). - Add pte_needs_flush() and huge_pmd_needs_flush() for 64-bit. - Add support for syscall wrappers. - Add support for KFENCE on 64-bit. - Update 64-bit HV KVM to use the new guest state entry/exit accounting API. - Support execute-only memory when using the Radix MMU (P9 or later). - Implement CONFIG_PARAVIRT_TIME_ACCOUNTING for pseries guests. - Updates to our linker script to move more data into read-only sections. - Allow the VDSO to be randomised on 32-bit. - Many other small features and fixes. Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Christophe Leroy, David Hildenbrand, Disha Goel, Fabiano Rosas, Gaosheng Cui, Gustavo A. R. Silva, Haren Myneni, Hari Bathini, Jilin Yuan, Joel Stanley, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent Dufour, Liang He, Li Huafei, Lukas Bulwahn, Madhavan Srinivasan, Nathan Chancellor, Nathan Lynch, Nicholas Miehlbradt, Nicholas Piggin, Pali Rohár, Rohan McLure, Russell Currey, Sachin Sant, Segher Boessenkool, Shrikanth Hegde, Tyrel Datwyler, Wolfram Sang, ye xingchen, and Zheng Yongjun. * tag 'powerpc-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (214 commits) KVM: PPC: Book3S HV: Fix stack frame regs marker powerpc: Don't add __powerpc_ prefix to syscall entry points powerpc/64s/interrupt: Fix stack frame regs marker powerpc/64: Fix msr_check_and_set/clear MSR[EE] race powerpc/64s/interrupt: Change must-hard-mask interrupt check from BUG to WARN powerpc/pseries: Add firmware details to the hardware description powerpc/powernv: Add opal details to the hardware description powerpc: Add device-tree model to the hardware description powerpc/64: Add logical PVR to the hardware description powerpc: Add PVR & CPU name to hardware description powerpc: Add hardware description string powerpc/configs: Enable PPC_UV in powernv_defconfig powerpc/configs: Update config files for removed/renamed symbols powerpc/mm: Fix UBSAN warning reported on hugetlb powerpc/mm: Always update max/min_low_pfn in mem_topology_setup() powerpc/mm/book3s/hash: Rename flush_tlb_pmd_range powerpc: Drops STABS_DEBUG from linker scripts powerpc/64s: Remove lost/old comment powerpc/64s: Remove old STAB comment powerpc: remove orphan systbl_chk.sh ... 2022-10-07T00:31:02Z Linus Torvalds torvalds@linux-foundation.org 2022-10-07T00:31:02Z urn:sha1:4c0ed7d8d6e3dc013c4599a837de84794baa5b62 Pull vfs constification updates from Al Viro: "whack-a-mole: constifying struct path *" * tag 'pull-path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ecryptfs: constify path spufs: constify path nd_jump_link(): constify path audit_init_parent(): constify path __io_setxattr(): constify path do_proc_readlink(): constify path overlayfs: constify path fs/notify: constify path may_linkat(): constify path do_sys_name_to_handle(): constify path ->getprocattr(): attribute name is const char *, TYVM... 2022-09-30T08:35:53Z Michael Ellerman mpe@ellerman.id.au 2022-09-30T08:27:09Z urn:sha1:8535a1afff0f4f568eb589f3795a930ef3d483b0 Add firmware version details to the hardware description, which is printed at boot and in case of an oops. Use /hypervisor if we find it, though currently it only exists if we're running under qemu. Look for "ibm,powervm-partition" which is specified in PAPR+ v2.11 and tells us we're running under PowerVM. Failing that look for "ibm,fw-net-version" which is seen on PowerVM going back to at least Power6. eg: Hardware name: ... of:IBM,FW860.42 (SV860_138) hv:phyp Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220930082709.55830-6-mpe@ellerman.id.au 2022-09-30T08:35:53Z Michael Ellerman mpe@ellerman.id.au 2022-09-30T08:27:08Z urn:sha1:37576cb0961fe9d3318c17e4e4bc5ecebf38e9bb Add OPAL version details to the hardware description, which is printed at boot and in case of an oops. eg: Hardware name: ... opal:v6.2 Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220930082709.55830-5-mpe@ellerman.id.au 2022-09-30T08:35:51Z Haren Myneni haren@linux.ibm.com 2022-09-29T01:57:33Z urn:sha1:f3e5d9e53e74d77e711a2c90a91a8b0836a9e0b3 Generally the hypervisor decides to allocate a window on different VAS instances. But if user space wishes to allocate on the current VAS instance where the process is executing, the kernel has to pass associativity domain IDs to allocate VAS window HCALL. To determine the associativity domain IDs for the current CPU, smp_processor_id() is passed to node associativity HCALL which may return H_P2 (-55) error during DLPAR CPU event. This is because Linux CPU numbers (smp_processor_id()) are not the same as the hypervisor's view of CPU numbers. Fix the issue by passing hard_smp_processor_id() with VPHN_FLAG_VCPU flag (PAPR 14.11.6.1 H_HOME_NODE_ASSOCIATIVITY). Fixes: b22f2d88e435 ("powerpc/pseries/vas: Integrate API with open/close windows") Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Haren Myneni <haren@linux.ibm.com> [mpe: Update change log to mention Linux vs HV CPU numbers] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/55380253ea0c11341824cd4c0fc6bbcfc5752689.camel@linux.ibm.com 2022-09-28T09:22:14Z ye xingchen ye.xingchen@zte.com.cn 2022-09-06T07:20:06Z urn:sha1:5e4952656bca1b5d8c2be36682dc66d844797ad2 Return the value opal_npu_spa_clear_cache() directly instead of storing it in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Acked-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220906072006.337099-1-ye.xingchen@zte.com.cn 2022-09-28T09:22:14Z ye xingchen ye.xingchen@zte.com.cn 2022-08-25T07:26:57Z urn:sha1:91986d7f0300c2c01722e0eac5119bb0946fe9b5 Return the value vas_register_coproc_api() directly instead of storing it in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220825072657.229168-1-ye.xingchen@zte.com.cn