linux-dev/arch/riscv/boot/dts/microchip, branch master

Merge tag 'dt-for-palmer-v6.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into for-next

2022-10-12T21:59:54Z

Microchip RISC-V devicetrees for v6.1 Fixups, reference design changes and new boards: - The addition of QSPI support for mpfs had a corresponding change to the devicetree node. - The v2022.{09,10} reference designs brought with them several memory map changes which are not backwards compatible. The old devicetrees from the v2022.08 and earlier releases still work with current kernels. - Two new devicetrees for a first-party development kit and for the Aries Embedded M100FPSEVP kit. - Corresponding dt-bindings changes for the above. Signed-off-by: Conor Dooley * tag 'dt-for-palmer-v6.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: microchip: fix fabric i2c reg size riscv: dts: microchip: update memory configuration for v2022.10 riscv: dts: microchip: add a devicetree for aries' m100pfsevp riscv: dts: microchip: add sevkit device tree riscv: dts: microchip: reduce the fic3 clock rate riscv: dts: microchip: icicle: re-jig fabric peripheral addresses riscv: dts: microchip: icicle: update pci address properties riscv: dts: microchip: move the mpfs' pci node to -fabric.dtsi riscv: dts: microchip: add pci dma ranges for the icicle kit dt-bindings: riscv: microchip: document the sev kit dt-bindings: riscv: microchip: document the aries m100pfsevp dt-bindings: riscv: microchip: document icicle reference design riscv: dts: microchip: add qspi compatible fallback Signed-off-by: Palmer Dabbelt

riscv: dts: microchip: fix fabric i2c reg size

2022-10-07T12:43:42Z

The size of the reg should've been changed when the address was changed, but obviously I forgot to do so. Fixes: ab291621a8b8 ("riscv: dts: microchip: icicle: re-jig fabric peripheral addresses") Signed-off-by: Conor Dooley

riscv: dts: microchip: update memory configuration for v2022.10

2022-09-27T17:53:59Z

In the v2022.10 reference design, the seg registers are going to be changed, resulting in a required change to the memory map in Linux. A small 4M reservation is made at the end of 32-bit DDR to provide some memory for the HSS to use, so that it can cache its payload.bin between reboots of a specific context. Signed-off-by: Conor Dooley

riscv: dts: microchip: add a devicetree for aries' m100pfsevp

2022-09-27T17:53:58Z

Add device trees for both configs used by the Aries Embedded M100PFSEVP. The M100OFSEVP consists of a MPFS250T on a SOM, featuring: - 2GB DDR4 SDRAM dedicated to the HMS - 512MB DDR4 SDRAM dedicated to the FPGA - 32 MB SPI NOR Flash - 4 GByte eMMC and a carrier board with: - 2x Gigabit Ethernet - USB - 2x UART - 2x CAN - TFT connector - HSMC extension connector - 3x PMOD extension connectors - microSD-card slot Link: https://www.aries-embedded.com/polarfire-soc-fpga-microsemi-m100pfs-som-mpfs025t-pcie-serdes Link: https://www.aries-embedded.com/evaluation-kit/fpga/polarfire-microchip-soc-fpga-m100pfsevp-riscv-hsmc-pmod Link: https://downloads.aries-embedded.de/products/M100PFS/Hardware/M100PFSEVP-Schematics.pdf Co-developed-by: Wolfgang Grandegger Signed-off-by: Wolfgang Grandegger Signed-off-by: Conor Dooley

riscv: dts: microchip: add sevkit device tree

2022-09-27T17:53:58Z

Add a basic dts for the Microchip Smart Embedded Vision dev kit. The SEV kit is an upcoming first party board, featuring an MPFS250T and: - Dual Sony Camera Sensors (IMX334) - IEEE 802.11 b/g/n 20MHz (1x1) Wi-Fi - Bluetooth 5 Low Energy - 4 GB DDR4 x64 - 2 GB LPDDR4 x32 - 1 GB SPI Flash - 8 GB eMMC flash & SD card slot (multiplexed) - HDMI2.0 Video Input/Output - MIPI DSI Output - MIPI CSI-2 Input Link: https://onlinedocs.microchip.com/pr/GUID-404D3738-DC76-46BA-8683-6A77E837C2DD-en-US-1/index.html?GUID-065AEBEE-7B2C-4895-8579-B1D73D797F06 Signed-off-by: Vattipalli Praveen Signed-off-by: Conor Dooley

riscv: dts: microchip: reduce the fic3 clock rate

2022-09-27T17:53:58Z

For the v2022.09 release of the reference design, the fic3 clock rate been reduced from 62.5 MHz to 50 MHz as it allows timing to be closed significantly more quickly by customers who chose to build the reference design themselves. Signed-off-by: Conor Dooley

riscv: dts: microchip: icicle: re-jig fabric peripheral addresses

2022-09-27T17:53:58Z

When users try to add onto the reference design, they find that the current addresses that peripherals connected to Fabric InterConnect (FIC) 3 use are restrictive. For the v2022.09 reference design, the peripherals have been shifted down, leaving more contiguous address space for their custom IP/peripherals. Signed-off-by: Conor Dooley

riscv: dts: microchip: icicle: update pci address properties

2022-09-27T17:53:58Z

For the v2022.09 reference design the PCI root port's data region has been moved to FIC1 from FIC0. This is a shorter path, allowing for higher clock rates and improved through-put. As a result, the address at which the PCIe's data region appears to the core complex has changed. The config region's address is unchanged. As FIC0 is no longer used, its clock can be removed too. Signed-off-by: Conor Dooley

riscv: dts: microchip: move the mpfs' pci node to -fabric.dtsi

2022-09-27T17:53:58Z

In today's edition of moving things around: The PCIe root port on PolarFire SoC is more part of the FPGA than of the Core Complex. It is located on the other side of the chip and, apart from its interrupts, most of its configuration is determined by the FPGA bitstream rather. This includes: - address translation in both directions - the addresses at which the config and data regions appear to the core complex - the clocks used by the AXI bus - the plic interrupt used Moving the PCIe node to the -fabric.dtsi makes it clearer than a singular configuration for root port is not correct & allows the base SoC dtsi to be more easily included. Signed-off-by: Conor Dooley

riscv: dts: microchip: add pci dma ranges for the icicle kit

2022-09-27T17:53:58Z

The recently removed, accidentally included, "matr0" property was used in place of a dma-ranges property. The PCI controller is non-functional with mainline Linux in the v2022.02 or later reference designs and has not worked without configuration of address-translation since v2021.08. Add the address translation that will be used by the v2022.09 reference design & update the compatible used by the dts. Since this change is not backwards compatible, update the compatible to denote this, jumping over v2022.09 directly to v2022.10. Signed-off-by: Conor Dooley