linux-dev/arch/riscv/boot/dts, branch master

riscv: dts: sifive unleashed: Add PWM controlled LEDs

2022-10-28T22:27:42Z

This adds the 4 PWM controlled green LEDs to the HiFive Unleashed device tree. The schematic doesn't specify any special function for the LEDs, so they're added here without any default triggers and named d1, d2, d3 and d4 just like in the schematic. Signed-off-by: Emil Renner Berthing Reviewed-by: Conor Dooley Tested-by: Conor Dooley Link: https://lore.kernel.org/r/20221012110928.352910-1-emil.renner.berthing@canonical.com Signed-off-by: Palmer Dabbelt

Merge tag 'riscv-for-linus-6.1-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

2022-10-14T18:21:11Z

Pull more RISC-V updates from Palmer Dabbelt: - DT updates for the PolarFire SOC - a fix to correct the handling of write-only mappings - m{vetndor,arcd,imp}id is now in /proc/cpuinfo - the SiFive L2 cache controller support has been refactored to also support L3 caches - misc fixes, cleanups and improvements throughout the tree * tag 'riscv-for-linus-6.1-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits) MAINTAINERS: add RISC-V's patchwork RISC-V: Make port I/O string accessors actually work riscv: enable software resend of irqs RISC-V: Re-enable counter access from userspace riscv: vdso: fix NULL deference in vdso_join_timens() when vfork riscv: Add cache information in AUX vector soc: sifive: ccache: define the macro for the register shifts soc: sifive: ccache: use pr_fmt() to remove CCACHE: prefixes soc: sifive: ccache: reduce printing on init soc: sifive: ccache: determine the cache level from dts soc: sifive: ccache: Rename SiFive L2 cache to Composable cache. dt-bindings: sifive-ccache: change Sifive L2 cache to Composable cache riscv: check for kernel config option in t-head memory types errata riscv: use BIT() marco for cpufeature probing riscv: use BIT() macros in t-head errata init riscv: drop some idefs from CMO initialization riscv: cleanup svpbmt cpufeature probing riscv: Pass -mno-relax only on lld < 15.0.0 RISC-V: Avoid dereferening NULL regs in die() dt-bindings: riscv: add new riscv,isa strings for emulators ...

Merge tag 'dt-for-palmer-v6.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into for-next

2022-10-12T21:59:54Z

Microchip RISC-V devicetrees for v6.1 Fixups, reference design changes and new boards: - The addition of QSPI support for mpfs had a corresponding change to the devicetree node. - The v2022.{09,10} reference designs brought with them several memory map changes which are not backwards compatible. The old devicetrees from the v2022.08 and earlier releases still work with current kernels. - Two new devicetrees for a first-party development kit and for the Aries Embedded M100FPSEVP kit. - Corresponding dt-bindings changes for the above. Signed-off-by: Conor Dooley * tag 'dt-for-palmer-v6.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: microchip: fix fabric i2c reg size riscv: dts: microchip: update memory configuration for v2022.10 riscv: dts: microchip: add a devicetree for aries' m100pfsevp riscv: dts: microchip: add sevkit device tree riscv: dts: microchip: reduce the fic3 clock rate riscv: dts: microchip: icicle: re-jig fabric peripheral addresses riscv: dts: microchip: icicle: update pci address properties riscv: dts: microchip: move the mpfs' pci node to -fabric.dtsi riscv: dts: microchip: add pci dma ranges for the icicle kit dt-bindings: riscv: microchip: document the sev kit dt-bindings: riscv: microchip: document the aries m100pfsevp dt-bindings: riscv: microchip: document icicle reference design riscv: dts: microchip: add qspi compatible fallback Signed-off-by: Palmer Dabbelt

Merge tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2022-10-11T17:59:59Z

Pull pin control updates from Linus Walleij: "There is nothing exciting going on, no core changes, just a few drivers and cleanups. New drivers: - Cypress CY8C95x0 chip pin control support, along with an immediate cleanup - Mediatek MT8188 SoC pin control support - Qualcomm SM8450 and SC8280XP LPASS (low power audio subsystem) pin control support - Qualcomm PM7250, PM8450 - Rockchip RV1126 SoC pin control support Improvements: - Fix some missing pins in the Armada 37xx driver - Convert Broadcom and Nomadik drivers to use PINCTRL_PINGROUP() macro - Fix some GPIO irq_chips to be immutable - Massive Qualcomm device tree binding cleanup, with more to come" * tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (119 commits) MAINTAINERS: adjust STARFIVE JH7100 PINCTRL DRIVER after file movement pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100" pinctrl: Create subdirectory for StarFive drivers dt-bindings: pinctrl: st,stm32: Document interrupt-controller property dt-bindings: pinctrl: st,stm32: Document gpio-hog pattern property dt-bindings: pinctrl: st,stm32: Document gpio-line-names pinctrl: st: stop abusing of_get_named_gpio() pinctrl: wpcm450: Correct the fwnode_irq_get() return value check pinctrl: bcm: Remove unused struct bcm6328_pingroup pinctrl: qcom: restrict drivers per ARM/ARM64 pinctrl: bcm: ns: Remove redundant dev_err call gpio: rockchip: request GPIO mux to pinctrl when setting direction pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback pinctrl: cy8c95x0: Align function names in cy8c95x0_pmxops pinctrl: cy8c95x0: Drop atomicity on operations on push_pull pinctrl: cy8c95x0: Lock register accesses in cy8c95x0_set_mux() pinctrl: sunxi: sun50i-h5: Switch to use dev_err_probe() helper pinctrl: stm32: Switch to use dev_err_probe() helper dt-bindings: qcom-pmic-gpio: Add PM7250B and PM8450 bindings pinctrl: qcom: spmi-gpio: Add compatible for PM7250B ...

riscv: dts: microchip: fix fabric i2c reg size

2022-10-07T12:43:42Z

The size of the reg should've been changed when the address was changed, but obviously I forgot to do so. Fixes: ab291621a8b8 ("riscv: dts: microchip: icicle: re-jig fabric peripheral addresses") Signed-off-by: Conor Dooley

pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100"

2022-10-04T08:47:48Z

Add the SoC name to make it more clear. Also the next generation StarFive SoCs will use "pinctrl-starfive" as the core of StarFive pinctrl driver. No functional change. Signed-off-by: Jianlong Huang Signed-off-by: Hal Feng Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220930061404.5418-1-hal.feng@linux.starfivetech.com Signed-off-by: Linus Walleij

riscv: dts: microchip: update memory configuration for v2022.10

2022-09-27T17:53:59Z

In the v2022.10 reference design, the seg registers are going to be changed, resulting in a required change to the memory map in Linux. A small 4M reservation is made at the end of 32-bit DDR to provide some memory for the HSS to use, so that it can cache its payload.bin between reboots of a specific context. Signed-off-by: Conor Dooley

riscv: dts: microchip: add a devicetree for aries' m100pfsevp

2022-09-27T17:53:58Z

Add device trees for both configs used by the Aries Embedded M100PFSEVP. The M100OFSEVP consists of a MPFS250T on a SOM, featuring: - 2GB DDR4 SDRAM dedicated to the HMS - 512MB DDR4 SDRAM dedicated to the FPGA - 32 MB SPI NOR Flash - 4 GByte eMMC and a carrier board with: - 2x Gigabit Ethernet - USB - 2x UART - 2x CAN - TFT connector - HSMC extension connector - 3x PMOD extension connectors - microSD-card slot Link: https://www.aries-embedded.com/polarfire-soc-fpga-microsemi-m100pfs-som-mpfs025t-pcie-serdes Link: https://www.aries-embedded.com/evaluation-kit/fpga/polarfire-microchip-soc-fpga-m100pfsevp-riscv-hsmc-pmod Link: https://downloads.aries-embedded.de/products/M100PFS/Hardware/M100PFSEVP-Schematics.pdf Co-developed-by: Wolfgang Grandegger Signed-off-by: Wolfgang Grandegger Signed-off-by: Conor Dooley

riscv: dts: microchip: add sevkit device tree

2022-09-27T17:53:58Z

Add a basic dts for the Microchip Smart Embedded Vision dev kit. The SEV kit is an upcoming first party board, featuring an MPFS250T and: - Dual Sony Camera Sensors (IMX334) - IEEE 802.11 b/g/n 20MHz (1x1) Wi-Fi - Bluetooth 5 Low Energy - 4 GB DDR4 x64 - 2 GB LPDDR4 x32 - 1 GB SPI Flash - 8 GB eMMC flash & SD card slot (multiplexed) - HDMI2.0 Video Input/Output - MIPI DSI Output - MIPI CSI-2 Input Link: https://onlinedocs.microchip.com/pr/GUID-404D3738-DC76-46BA-8683-6A77E837C2DD-en-US-1/index.html?GUID-065AEBEE-7B2C-4895-8579-B1D73D797F06 Signed-off-by: Vattipalli Praveen Signed-off-by: Conor Dooley

riscv: dts: microchip: reduce the fic3 clock rate

2022-09-27T17:53:58Z

For the v2022.09 release of the reference design, the fic3 clock rate been reduced from 62.5 MHz to 50 MHz as it allows timing to be closed significantly more quickly by customers who chose to build the reference design themselves. Signed-off-by: Conor Dooley