linux-dev/arch/riscv/boot, branch master

riscv: dts: sifive unleashed: Add PWM controlled LEDs

2022-10-28T22:27:42Z

This adds the 4 PWM controlled green LEDs to the HiFive Unleashed device tree. The schematic doesn't specify any special function for the LEDs, so they're added here without any default triggers and named d1, d2, d3 and d4 just like in the schematic. Signed-off-by: Emil Renner Berthing Reviewed-by: Conor Dooley Tested-by: Conor Dooley Link: https://lore.kernel.org/r/20221012110928.352910-1-emil.renner.berthing@canonical.com Signed-off-by: Palmer Dabbelt

Merge tag 'riscv-for-linus-6.1-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

2022-10-14T18:21:11Z

Pull more RISC-V updates from Palmer Dabbelt: - DT updates for the PolarFire SOC - a fix to correct the handling of write-only mappings - m{vetndor,arcd,imp}id is now in /proc/cpuinfo - the SiFive L2 cache controller support has been refactored to also support L3 caches - misc fixes, cleanups and improvements throughout the tree * tag 'riscv-for-linus-6.1-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits) MAINTAINERS: add RISC-V's patchwork RISC-V: Make port I/O string accessors actually work riscv: enable software resend of irqs RISC-V: Re-enable counter access from userspace riscv: vdso: fix NULL deference in vdso_join_timens() when vfork riscv: Add cache information in AUX vector soc: sifive: ccache: define the macro for the register shifts soc: sifive: ccache: use pr_fmt() to remove CCACHE: prefixes soc: sifive: ccache: reduce printing on init soc: sifive: ccache: determine the cache level from dts soc: sifive: ccache: Rename SiFive L2 cache to Composable cache. dt-bindings: sifive-ccache: change Sifive L2 cache to Composable cache riscv: check for kernel config option in t-head memory types errata riscv: use BIT() marco for cpufeature probing riscv: use BIT() macros in t-head errata init riscv: drop some idefs from CMO initialization riscv: cleanup svpbmt cpufeature probing riscv: Pass -mno-relax only on lld < 15.0.0 RISC-V: Avoid dereferening NULL regs in die() dt-bindings: riscv: add new riscv,isa strings for emulators ...

Merge tag 'dt-for-palmer-v6.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into for-next

2022-10-12T21:59:54Z

Microchip RISC-V devicetrees for v6.1 Fixups, reference design changes and new boards: - The addition of QSPI support for mpfs had a corresponding change to the devicetree node. - The v2022.{09,10} reference designs brought with them several memory map changes which are not backwards compatible. The old devicetrees from the v2022.08 and earlier releases still work with current kernels. - Two new devicetrees for a first-party development kit and for the Aries Embedded M100FPSEVP kit. - Corresponding dt-bindings changes for the above. Signed-off-by: Conor Dooley * tag 'dt-for-palmer-v6.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: microchip: fix fabric i2c reg size riscv: dts: microchip: update memory configuration for v2022.10 riscv: dts: microchip: add a devicetree for aries' m100pfsevp riscv: dts: microchip: add sevkit device tree riscv: dts: microchip: reduce the fic3 clock rate riscv: dts: microchip: icicle: re-jig fabric peripheral addresses riscv: dts: microchip: icicle: update pci address properties riscv: dts: microchip: move the mpfs' pci node to -fabric.dtsi riscv: dts: microchip: add pci dma ranges for the icicle kit dt-bindings: riscv: microchip: document the sev kit dt-bindings: riscv: microchip: document the aries m100pfsevp dt-bindings: riscv: microchip: document icicle reference design riscv: dts: microchip: add qspi compatible fallback Signed-off-by: Palmer Dabbelt

Merge tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2022-10-11T17:59:59Z

Pull pin control updates from Linus Walleij: "There is nothing exciting going on, no core changes, just a few drivers and cleanups. New drivers: - Cypress CY8C95x0 chip pin control support, along with an immediate cleanup - Mediatek MT8188 SoC pin control support - Qualcomm SM8450 and SC8280XP LPASS (low power audio subsystem) pin control support - Qualcomm PM7250, PM8450 - Rockchip RV1126 SoC pin control support Improvements: - Fix some missing pins in the Armada 37xx driver - Convert Broadcom and Nomadik drivers to use PINCTRL_PINGROUP() macro - Fix some GPIO irq_chips to be immutable - Massive Qualcomm device tree binding cleanup, with more to come" * tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (119 commits) MAINTAINERS: adjust STARFIVE JH7100 PINCTRL DRIVER after file movement pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100" pinctrl: Create subdirectory for StarFive drivers dt-bindings: pinctrl: st,stm32: Document interrupt-controller property dt-bindings: pinctrl: st,stm32: Document gpio-hog pattern property dt-bindings: pinctrl: st,stm32: Document gpio-line-names pinctrl: st: stop abusing of_get_named_gpio() pinctrl: wpcm450: Correct the fwnode_irq_get() return value check pinctrl: bcm: Remove unused struct bcm6328_pingroup pinctrl: qcom: restrict drivers per ARM/ARM64 pinctrl: bcm: ns: Remove redundant dev_err call gpio: rockchip: request GPIO mux to pinctrl when setting direction pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback pinctrl: cy8c95x0: Align function names in cy8c95x0_pmxops pinctrl: cy8c95x0: Drop atomicity on operations on push_pull pinctrl: cy8c95x0: Lock register accesses in cy8c95x0_set_mux() pinctrl: sunxi: sun50i-h5: Switch to use dev_err_probe() helper pinctrl: stm32: Switch to use dev_err_probe() helper dt-bindings: qcom-pmic-gpio: Add PM7250B and PM8450 bindings pinctrl: qcom: spmi-gpio: Add compatible for PM7250B ...

Merge tag 'efi-next-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi

2022-10-09T15:56:54Z

Pull EFI updates from Ard Biesheuvel: "A bit more going on than usual in the EFI subsystem. The main driver for this has been the introduction of the LoonArch architecture last cycle, which inspired some cleanup and refactoring of the EFI code. Another driver for EFI changes this cycle and in the future is confidential compute. The LoongArch architecture does not use either struct bootparams or DT natively [yet], and so passing information between the EFI stub and the core kernel using either of those is undesirable. And in general, overloading DT has been a source of issues on arm64, so using DT for this on new architectures is a to avoid for the time being (even if we might converge on something DT based for non-x86 architectures in the future). For this reason, in addition to the patch that enables EFI boot for LoongArch, there are a number of refactoring patches applied on top of which separate the DT bits from the generic EFI stub bits. These changes are on a separate topich branch that has been shared with the LoongArch maintainers, who will include it in their pull request as well. This is not ideal, but the best way to manage the conflicts without stalling LoongArch for another cycle. Another development inspired by LoongArch is the newly added support for EFI based decompressors. Instead of adding yet another arch-specific incarnation of this pattern for LoongArch, we are introducing an EFI app based on the existing EFI libstub infrastructure that encapulates the decompression code we use on other architectures, but in a way that is fully generic. This has been developed and tested in collaboration with distro and systemd folks, who are eager to start using this for systemd-boot and also for arm64 secure boot on Fedora. Note that the EFI zimage files this introduces can also be decompressed by non-EFI bootloaders if needed, as the image header describes the location of the payload inside the image, and the type of compression that was used. (Note that Fedora's arm64 GRUB is buggy [0] so you'll need a recent version or switch to systemd-boot in order to use this.) Finally, we are adding TPM measurement of the kernel command line provided by EFI. There is an oversight in the TCG spec which results in a blind spot for command line arguments passed to loaded images, which means that either the loader or the stub needs to take the measurement. Given the combinatorial explosion I am anticipating when it comes to firmware/bootloader stacks and firmware based attestation protocols (SEV-SNP, TDX, DICE, DRTM), it is good to set a baseline now when it comes to EFI measured boot, which is that the kernel measures the initrd and command line. Intermediate loaders can measure additional assets if needed, but with the baseline in place, we can deploy measured boot in a meaningful way even if you boot into Linux straight from the EFI firmware. Summary: - implement EFI boot support for LoongArch - implement generic EFI compressed boot support for arm64, RISC-V and LoongArch, none of which implement a decompressor today - measure the kernel command line into the TPM if measured boot is in effect - refactor the EFI stub code in order to isolate DT dependencies for architectures other than x86 - avoid calling SetVirtualAddressMap() on arm64 if the configured size of the VA space guarantees that doing so is unnecessary - move some ARM specific code out of the generic EFI source files - unmap kernel code from the x86 mixed mode 1:1 page tables" * tag 'efi-next-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits) efi/arm64: libstub: avoid SetVirtualAddressMap() when possible efi: zboot: create MemoryMapped() device path for the parent if needed efi: libstub: fix up the last remaining open coded boot service call efi/arm: libstub: move ARM specific code out of generic routines efi/libstub: measure EFI LoadOptions efi/libstub: refactor the initrd measuring functions efi/loongarch: libstub: remove dependency on flattened DT efi: libstub: install boot-time memory map as config table efi: libstub: remove DT dependency from generic stub efi: libstub: unify initrd loading between architectures efi: libstub: remove pointless goto kludge efi: libstub: simplify efi_get_memory_map() and struct efi_boot_memmap efi: libstub: avoid efi_get_memory_map() for allocating the virt map efi: libstub: drop pointless get_memory_map() call efi: libstub: fix type confusion for load_options_size arm64: efi: enable generic EFI compressed boot loongarch: efi: enable generic EFI compressed boot riscv: efi: enable generic EFI compressed boot efi/libstub: implement generic EFI zboot efi/libstub: move efi_system_table global var into separate object ...

riscv: dts: microchip: fix fabric i2c reg size

2022-10-07T12:43:42Z

The size of the reg should've been changed when the address was changed, but obviously I forgot to do so. Fixes: ab291621a8b8 ("riscv: dts: microchip: icicle: re-jig fabric peripheral addresses") Signed-off-by: Conor Dooley

pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100"

2022-10-04T08:47:48Z

Add the SoC name to make it more clear. Also the next generation StarFive SoCs will use "pinctrl-starfive" as the core of StarFive pinctrl driver. No functional change. Signed-off-by: Jianlong Huang Signed-off-by: Hal Feng Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220930061404.5418-1-hal.feng@linux.starfivetech.com Signed-off-by: Linus Walleij

riscv: dts: microchip: update memory configuration for v2022.10

2022-09-27T17:53:59Z

In the v2022.10 reference design, the seg registers are going to be changed, resulting in a required change to the memory map in Linux. A small 4M reservation is made at the end of 32-bit DDR to provide some memory for the HSS to use, so that it can cache its payload.bin between reboots of a specific context. Signed-off-by: Conor Dooley

riscv: dts: microchip: add a devicetree for aries' m100pfsevp

2022-09-27T17:53:58Z

Add device trees for both configs used by the Aries Embedded M100PFSEVP. The M100OFSEVP consists of a MPFS250T on a SOM, featuring: - 2GB DDR4 SDRAM dedicated to the HMS - 512MB DDR4 SDRAM dedicated to the FPGA - 32 MB SPI NOR Flash - 4 GByte eMMC and a carrier board with: - 2x Gigabit Ethernet - USB - 2x UART - 2x CAN - TFT connector - HSMC extension connector - 3x PMOD extension connectors - microSD-card slot Link: https://www.aries-embedded.com/polarfire-soc-fpga-microsemi-m100pfs-som-mpfs025t-pcie-serdes Link: https://www.aries-embedded.com/evaluation-kit/fpga/polarfire-microchip-soc-fpga-m100pfsevp-riscv-hsmc-pmod Link: https://downloads.aries-embedded.de/products/M100PFS/Hardware/M100PFSEVP-Schematics.pdf Co-developed-by: Wolfgang Grandegger Signed-off-by: Wolfgang Grandegger Signed-off-by: Conor Dooley

riscv: dts: microchip: add sevkit device tree

2022-09-27T17:53:58Z

Add a basic dts for the Microchip Smart Embedded Vision dev kit. The SEV kit is an upcoming first party board, featuring an MPFS250T and: - Dual Sony Camera Sensors (IMX334) - IEEE 802.11 b/g/n 20MHz (1x1) Wi-Fi - Bluetooth 5 Low Energy - 4 GB DDR4 x64 - 2 GB LPDDR4 x32 - 1 GB SPI Flash - 8 GB eMMC flash & SD card slot (multiplexed) - HDMI2.0 Video Input/Output - MIPI DSI Output - MIPI CSI-2 Input Link: https://onlinedocs.microchip.com/pr/GUID-404D3738-DC76-46BA-8683-6A77E837C2DD-en-US-1/index.html?GUID-065AEBEE-7B2C-4895-8579-B1D73D797F06 Signed-off-by: Vattipalli Praveen Signed-off-by: Conor Dooley