linux-dev/arch/riscv/kernel/irq.c, branch linus/master

RISC-V: Remove do_IRQ() function

2020-06-10T02:11:24Z

The only thing do_IRQ() does is call handle_arch_irq function pointer. We can very well call handle_arch_irq function pointer directly from assembly and remove do_IRQ() function hence this patch. Signed-off-by: Anup Patel Reviewed-by: Atish Patra Signed-off-by: Palmer Dabbelt

irqchip: RISC-V per-HART local interrupt controller driver

2020-06-10T02:11:21Z

The RISC-V per-HART local interrupt controller manages software interrupts, timer interrupts, external interrupts (which are routed via the platform level interrupt controller) and other per-HART local interrupts. We add a driver for the RISC-V local interrupt controller, which eventually replaces the RISC-V architecture code, allowing for a better split between arch code and drivers. The driver is compliant with RISC-V Hart-Level Interrupt Controller DT bindings located at: Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt Co-developed-by: Palmer Dabbelt Signed-off-by: Anup Patel [Palmer: Cleaned up warnings] Signed-off-by: Palmer Dabbelt

RISC-V: self-contained IPI handling routine

2020-06-10T02:11:19Z

Currently, the IPI handling routine riscv_software_interrupt() does not take any argument and also does not perform irq_enter()/irq_exit(). This patch makes IPI handling routine more self-contained by: 1. Passing "pt_regs *" argument 2. Explicitly doing irq_enter()/irq_exit() 3. Explicitly save/restore "pt_regs *" using set_irq_regs() With above changes, IPI handling routine does not depend on caller function to perform irq_enter()/irq_exit() and save/restore of "pt_regs *" hence its more self-contained. This also enables us to call IPI handling routine from IRQCHIP drivers. Signed-off-by: Anup Patel Reviewed-by: Atish Patra Reviewed-by: Palmer Dabbelt Acked-by: Palmer Dabbelt Signed-off-by: Palmer Dabbelt

riscv: prefix IRQ_ macro names with an RV_ namespace

2020-01-05T05:48:59Z

"IRQ_TIMER", used in the arch/riscv CSR header file, is a sufficiently generic macro name that it's used by several source files across the Linux code base. Some of these other files ultimately include the arch/riscv CSR include file, causing collisions. Fix by prefixing the RISC-V csr.h IRQ_ macro names with an RV_ prefix. Fixes: a4c3733d32a72 ("riscv: abstract out CSR names for supervisor vs machine mode") Reported-by: Olof Johansson Acked-by: Olof Johansson Signed-off-by: Paul Walmsley

riscv: abstract out CSR names for supervisor vs machine mode

2019-11-05T17:20:42Z

Many of the privileged CSRs exist in a supervisor and machine version that are used very similarly. Provide versions of the CSR names and fields that map to either the S-mode or M-mode variant depending on a new CONFIG_RISCV_M_MODE kconfig symbol. Contains contributions from Damien Le Moal and Paul Walmsley . Signed-off-by: Christoph Hellwig Acked-by: Thomas Gleixner # for drivers/clocksource, drivers/irqchip [paul.walmsley@sifive.com: updated to apply] Signed-off-by: Paul Walmsley

riscv: for C functions called only from assembly, mark with __visible

2019-10-28T07:46:02Z

Rather than adding prototypes for C functions called only by assembly code, mark them as __visible. This avoids adding prototypes that will never be used by the callers. Resolves the following sparse warnings: arch/riscv/kernel/irq.c:27:29: warning: symbol 'do_IRQ' was not declared. Should it be static? arch/riscv/kernel/ptrace.c:151:6: warning: symbol 'do_syscall_trace_enter' was not declared. Should it be static? arch/riscv/kernel/ptrace.c:165:6: warning: symbol 'do_syscall_trace_exit' was not declared. Should it be static? arch/riscv/kernel/signal.c:295:17: warning: symbol 'do_notify_resume' was not declared. Should it be static? arch/riscv/kernel/traps.c:92:1: warning: symbol 'do_trap_unknown' was not declared. Should it be static? arch/riscv/kernel/traps.c:94:1: warning: symbol 'do_trap_insn_misaligned' was not declared. Should it be static? arch/riscv/kernel/traps.c:96:1: warning: symbol 'do_trap_insn_fault' was not declared. Should it be static? arch/riscv/kernel/traps.c:98:1: warning: symbol 'do_trap_insn_illegal' was not declared. Should it be static? arch/riscv/kernel/traps.c:100:1: warning: symbol 'do_trap_load_misaligned' was not declared. Should it be static? arch/riscv/kernel/traps.c:102:1: warning: symbol 'do_trap_load_fault' was not declared. Should it be static? arch/riscv/kernel/traps.c:104:1: warning: symbol 'do_trap_store_misaligned' was not declared. Should it be static? arch/riscv/kernel/traps.c:106:1: warning: symbol 'do_trap_store_fault' was not declared. Should it be static? arch/riscv/kernel/traps.c:108:1: warning: symbol 'do_trap_ecall_u' was not declared. Should it be static? arch/riscv/kernel/traps.c:110:1: warning: symbol 'do_trap_ecall_s' was not declared. Should it be static? arch/riscv/kernel/traps.c:112:1: warning: symbol 'do_trap_ecall_m' was not declared. Should it be static? arch/riscv/kernel/traps.c:124:17: warning: symbol 'do_trap_break' was not declared. Should it be static? arch/riscv/kernel/smpboot.c:136:24: warning: symbol 'smp_callin' was not declared. Should it be static? Based on a suggestion from Luc Van Oostenryck. This version includes changes based on feedback from Christoph Hellwig . Signed-off-by: Paul Walmsley Cc: Luc Van Oostenryck Reviewed-by: Christoph Hellwig # for do_syscall_trace_*

RISC-V: Add interrupt related SCAUSE defines in asm/csr.h

2019-05-17T03:42:11Z

This patch adds SCAUSE interrupt flag and SCAUSE interrupt related defines to asm/csr.h. We also use these defines in kernel/irq.c and express SIE/SIP flags in-terms of SCAUSE interrupt causes. Signed-off-by: Anup Patel Reviewed-by: Christoph Hellwig Signed-off-by: Palmer Dabbelt

riscv: print the unexpected interrupt cause

2019-04-25T21:51:11Z

This has been helpful when debugging my pending nommu port. Signed-off-by: Christoph Hellwig Reviewed-by: Nick Kossifidis Signed-off-by: Palmer Dabbelt

RISC-V: Show IPI stats

2018-10-23T00:03:37Z

This patch provides arch_show_interrupts() implementation to show IPI stats via /proc/interrupts. Now the contents of /proc/interrupts" will look like below: CPU0 CPU1 CPU2 CPU3 8: 17 7 6 14 SiFive PLIC 8 virtio0 10: 10 10 9 11 SiFive PLIC 10 ttyS0 IPI0: 170 673 251 79 Rescheduling interrupts IPI1: 1 12 27 1 Function call interrupts Signed-off-by: Anup Patel [Atish - Fixed checkpatch errors] Signed-off-by: Atish Patra Reviewed-by: Palmer Dabbelt Changes since v2: - Remove use of IPI_CALL_WAKEUP because it's being removed Changes since v1: - Add stub inline show_ipi_stats() function for !CONFIG_SMP - Make ipi_names[] dynamically sized at compile time - Minor beautification of ipi_names[] using tabs Signed-off-by: Palmer Dabbelt

RISC-V: No need to pass scause as arg to do_IRQ()

2018-10-23T00:03:35Z

The scause is already part of pt_regs so no need to pass scause as separate arg to do_IRQ(). Reviewed-by: Christoph Hellwig Signed-off-by: Anup Patel Signed-off-by: Palmer Dabbelt