linux-dev/arch/s390/include/asm/io.h, branch linus/master

mm: remove xlate_dev_kmem_ptr()

2021-05-07T07:26:34Z

Since /dev/kmem has been removed, let's remove the xlate_dev_kmem_ptr() leftovers. Link: https://lkml.kernel.org/r/20210324102351.6932-3-david@redhat.com Signed-off-by: David Hildenbrand Acked-by: Geert Uytterhoeven Acked-by: Michal Hocko Cc: Linus Torvalds Cc: Greg Kroah-Hartman Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Cc: Russell King Cc: Brian Cain Cc: Geert Uytterhoeven Cc: Thomas Bogendoerfer Cc: "James E.J. Bottomley" Cc: Helge Deller Cc: Michael Ellerman Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Heiko Carstens Cc: Vasily Gorbik Cc: Christian Borntraeger Cc: Yoshinori Sato Cc: Rich Felker Cc: "David S. Miller" Cc: Arnd Bergmann Cc: David Hildenbrand Cc: Krzysztof Kozlowski Cc: Mikulas Patocka Cc: Luc Van Oostenryck Cc: Mike Rapoport Cc: Palmer Dabbelt Cc: Luis Chamberlain Cc: Greentime Hu Cc: Sebastian Andrzej Siewior Cc: Randy Dunlap Cc: Jiaxun Yang Cc: "Peter Zijlstra (Intel)" Cc: Christophe Leroy Cc: Gerald Schaefer Cc: Niklas Schnelle Cc: Pierre Morel Cc: Ingo Molnar Cc: Kuninori Morimoto Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

s390/pci: Implement ioremap_wc/prot() with MIO

2020-09-14T08:30:07Z

With our current support for the new MIO PCI instructions, write combining/write back MMIO memory can be obtained via the pci_iomap_wc() and pci_iomap_wc_range() functions. This is achieved by using the write back address for a specific bar as provided in clp_store_query_pci_fn() These functions are however not widely used and instead drivers often rely on ioremap_wc() and ioremap_prot(), which on other platforms enable write combining using a PTE flag set through the pgrprot value. While we do not have a write combining flag in the low order flag bits of the PTE like x86_64 does, with MIO support, there is a write back bit in the physical address (bit 1 on z15) and thus also the PTE. Which bit is used to toggle write back and whether it is available at all, is however not fixed in the architecture. Instead we get this information from the CLP Store Logical Processor Characteristics for PCI command. When the write back bit is not provided we fall back to the existing behavior. Signed-off-by: Niklas Schnelle Reviewed-by: Pierre Morel Reviewed-by: Gerald Schaefer Signed-off-by: Vasily Gorbik

s390/pci: ioremap() align with generic code

2020-05-20T08:22:52Z

Let's use the same signature and parameter names as in the generic ioremap() definition making the physical address' type explicit. Add a check against address wrap around as in the generic lib/ioremap.c:ioremap_prot() code. Finally use free_vm_area() instead of vunmap() as in the generic code. Besides being clearer free_vm_area() can also skip a few additional checks compared with vunmap(). Signed-off-by: Niklas Schnelle Reviewed-by: Gerald Schaefer Signed-off-by: Vasily Gorbik

arch: rely on asm-generic/io.h for default ioremap_* definitions

2019-11-11T20:18:19Z

Various architectures that use asm-generic/io.h still defined their own default versions of ioremap_nocache, ioremap_wt and ioremap_wc that point back to plain ioremap directly or indirectly. Remove these definitions and rely on asm-generic/io.h instead. For this to work the backup ioremap_* defintions needs to be changed to purely cpp macros instea of inlines to cover for architectures like openrisc that only define ioremap after including . Signed-off-by: Christoph Hellwig Reviewed-by: Arnd Bergmann Reviewed-by: Palmer Dabbelt

s390/pci: provide support for MIO instructions

2019-04-29T08:47:01Z

Provide support for PCI I/O instructions that work on mapped IO addresses. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

s390: provide default ioremap and iounmap declaration

2017-06-12T14:26:00Z

Move the CONFIG_PCI device so that ioremap and iounmap are always available. This looks safe as there's nothing PCI specific in the implementation of these functions. I have designs to use these functions in scatterlist.c where they'd likely never be called without CONFIG_PCI set, but this is needed to compile such changes. Signed-off-by: Logan Gunthorpe Cc: Martin Schwidefsky Cc: Heiko Carstens Cc: Sebastian Ott Cc: Al Viro Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky

s390/io: Add pci_iomap_wc() and pci_iomap_wc_range()

2015-08-28T06:04:48Z

The following commit: 1b3d4200c1e0 ("PCI: Add pci_iomap_wc() variants") Introduced pci_iomap_wc() variants but broke the s390 build, because s390 requires its own implementation of pcio_iomap*() calls. The reason for that is that: "BAR spaces are not disjunctive on s390 so we need the bar parameter of pci_iomap to find the corresponding device and create the mapping cookie" so it has its own lookup/lock solution and it does not include asm-generic/pci_iomap.h. Since it currenty maps ioremap_wc() to ioremap_nocache() and that's the architecture default we can easily just map the wc calls to the default calls as well. Reported-by: kbuild test robot Signed-off-by: Luis R. Rodriguez Cc: Andrew Morton Cc: Borislav Petkov Cc: Fengguang Wu Cc: Frank Blaschka Cc: Guenter Roeck Cc: Heiko Carstens Cc: Jean-Christophe Plagniol-Villard Cc: Linus Torvalds Cc: Martin Schwidefsky Cc: Peter Zijlstra Cc: Steven Rostedt Cc: Thierry Reding Cc: Thomas Gleixner Cc: Tomi Valkeinen Cc: Toshi Kani Cc: Will Deacon Cc: linux-fbdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linux390@de.ibm.com Link: http://lkml.kernel.org/r/1440632050-23648-1-git-send-email-mcgrof@do-not-panic.com Signed-off-by: Ingo Molnar

arch/*/io.h: Add ioremap_wt() to all architectures

2015-06-07T13:28:57Z

Add ioremap_wt() to all arch-specific asm/io.h headers which define ioremap_wc() locally. These headers do not include . Some of them include , but ioremap_wt() is defined for consistency since they define all ioremap_xxx locally. In all architectures without Write-Through support, ioremap_wt() is defined indentical to ioremap_nocache(). frv and m68k already have ioremap_writethrough(). On those we add ioremap_wt() indetical to ioremap_writethrough() and defines ARCH_HAS_IOREMAP_WT in both architectures. The ioremap_wt() interface is exported to drivers. Signed-off-by: Toshi Kani Signed-off-by: Borislav Petkov Cc: Andrew Morton Cc: Andy Lutomirski Cc: Elliott@hp.com Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Luis R. Rodriguez Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: arnd@arndb.de Cc: hch@lst.de Cc: hmh@hmh.eng.br Cc: jgross@suse.com Cc: konrad.wilk@oracle.com Cc: linux-mm Cc: linux-nvdimm@lists.01.org Cc: stefan.bader@canonical.com Cc: yigal@plexistor.com Link: http://lkml.kernel.org/r/1433436928-31903-9-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2014-12-12T01:30:55Z

Pull s390 updates from Martin Schwidefsky: "The most notable change for this pull request is the ftrace rework from Heiko. It brings a small performance improvement and the ground work to support a new gcc option to replace the mcount blocks with a single nop. Two new s390 specific system calls are added to emulate user space mmio for PCI, an artifact of the how PCI memory is accessed. Two patches for the memory management with changes to common code. For KVM mm_forbids_zeropage is added which disables the empty zero page for an mm that is used by a KVM process. And an optimization, pmdp_get_and_clear_full is added analog to ptep_get_and_clear_full. Some micro optimization for the cmpxchg and the spinlock code. And as usual bug fixes and cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (46 commits) s390/cputime: fix 31-bit compile s390/scm_block: make the number of reqs per HW req configurable s390/scm_block: handle multiple requests in one HW request s390/scm_block: allocate aidaw pages only when necessary s390/scm_block: use mempool to manage aidaw requests s390/eadm: change timeout value s390/mm: fix memory leak of ptlock in pmd_free_tlb s390: use local symbol names in entry[64].S s390/ptrace: always include vector registers in core files s390/simd: clear vector register pointer on fork/clone s390: translate cputime magic constants to macros s390/idle: convert open coded idle time seqcount s390/idle: add missing irq off lockdep annotation s390/debug: avoid function call for debug_sprintf_* s390/kprobes: fix instruction copy for out of line execution s390: remove diag 44 calls from cpu_relax() s390/dasd: retry partition detection s390/dasd: fix list corruption for sleep_on requests s390/dasd: fix infinite term I/O loop s390/dasd: remove unused code ...