linux-dev/arch/s390/include/asm/sclp.h, branch linus/master

s390/sclp: add detection of IPL-complete-control facility

2022-04-25T11:54:12Z

The presence of the IPL-complete-control facility can be derived from the hypervisor's SCLP info response. Signed-off-by: Alexander Egorenkov Reviewed-by: Christian Borntraeger Signed-off-by: Heiko Carstens

Merge tag 's390-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2022-03-25T17:01:34Z

Pull s390 updates from Vasily Gorbik: - Raise minimum supported machine generation to z10, which comes with various cleanups and code simplifications (usercopy/spectre mitigation/etc). - Rework extables and get rid of anonymous out-of-line fixups. - Page table helpers cleanup. Add set_pXd()/set_pte() helper functions. Covert pte_val()/pXd_val() macros to functions. - Optimize kretprobe handling by avoiding extra kprobe on __kretprobe_trampoline. - Add support for CEX8 crypto cards. - Allow to trigger AP bus rescan via writing to /sys/bus/ap/scans. - Add CONFIG_EXPOLINE_EXTERN option to build the kernel without COMDAT group sections which simplifies kpatch support. - Always use the packed stack layout and extend kernel unwinder tests. - Add sanity checks for ftrace code patching. - Add s390dbf debug log for the vfio_ap device driver. - Various virtual vs physical address confusion fixes. - Various small fixes and improvements all over the code. * tag 's390-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (69 commits) s390/test_unwind: add kretprobe tests s390/kprobes: Avoid additional kprobe in kretprobe handling s390: convert ".insn" encoding to instruction names s390: assume stckf is always present s390/nospec: move to single register thunks s390: raise minimum supported machine generation to z10 s390/uaccess: Add copy_from/to_user_key functions s390/nospec: align and size extern thunks s390/nospec: add an option to use thunk-extern s390/nospec: generate single register thunks if possible s390/pci: make zpci_set_irq()/zpci_clear_irq() static s390: remove unused expoline to BC instructions s390/irq: use assignment instead of cast s390/traps: get rid of magic cast for per code s390/traps: get rid of magic cast for program interruption code s390/signal: fix typo in comments s390/asm-offsets: remove unused defines s390/test_unwind: avoid build warning with W=1 s390: remove .fixup section s390/bpf: encode register within extable entry ...

treewide: Replace zero-length arrays with flexible-array members

2022-02-17T13:00:39Z

There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. This code was transformed with the help of Coccinelle: (next-20220214$ spatch --jobs $(getconf _NPROCESSORS_ONLN) --sp-file script.cocci --include-headers --dir . > output.patch) @@ identifier S, member, array; type T1, T2; @@ struct S { ... T1 member; T2 array[ - 0 ]; }; UAPI and wireless changes were intentionally excluded from this patch and will be sent out separately. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/78 Reviewed-by: Kees Cook Signed-off-by: Gustavo A. R. Silva

s390: remove invalid email address of Heiko Carstens

2022-02-06T22:31:29Z

Remove my old invalid email address which can be found in a couple of files. Instead of updating it, just remove my contact data completely from source files. We have git and other tools which allow to figure out who is responsible for what with recent contact data. Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik

s390/sclp: sort out physical vs virtual pointers usage

2021-10-26T13:21:28Z

Provide physical addresses whenever the hardware interface expects it or a 32-bit value used for tracking. Variable sclp_early_sccb gets initialized in the decompressor and points to an address in physcal memory. Yet, it is used as virtual memory pointer and therefore should be converted. Note, the other two __bootdata variables sclp_info_sccb and sclp_info_sccb_valid contain plain data, but no pointers and do need any special care. Reviewed-by: Heiko Carstens Signed-off-by: Alexander Gordeev Signed-off-by: Vasily Gorbik

s390/sclp: reserve memory occupied by sclp early buffer

2021-08-18T08:01:29Z

The memory block occupied by the SCLP early buffer that is allocated by the decompressor and then handed over to the decompressed kernel, must be reserved to prevent it from being reused for other purposes. This is necessary because the SCLP early buffer is still in use during kernel initialization. Fixes: f1d3c5323772 ("s390/boot: move sclp early buffer from fixed address in asm to C") Signed-off-by: Alexander Egorenkov Reported-by: Alexander Gordeev Reviewed-by: Alexander Gordeev Signed-off-by: Vasily Gorbik

s390/boot: move sclp early buffer from fixed address in asm to C

2021-07-27T07:39:15Z

To make the decompressor relocatable, the early SCLP buffer with a fixed address must be replaced with a relocatable C buffer of the according size and alignment as required by SCLP. Introduce a new function sclp_early_set_buffer() into the SCLP driver which enables the decompressor to change the SCLP early buffer at any time. This will be useful when the decompressor becomes fully relocatable and might need to change the SCLP early buffer to one with an address < 2G as required by SCLP because it was loaded at an address >= 2G. Signed-off-by: Alexander Egorenkov Acked-by: Heiko Carstens Signed-off-by: Heiko Carstens

s390/sclp: use only one sclp early buffer to send commands

2021-07-27T07:39:13Z

A buffer that can be used for communication with SCLP is required to lie below 2GB memory address. Therefore, both sclp_info_sccb and sclp_early_sccb must fulfill this requirement if passed directly to the sclp_early_cmd() function. Instead, use only sclp_early_sccb for communication with SCLP. This allows the buffer sclp_info_sccb to be placed anywhere in the memory address space and, therefore, simplifies the process of making the decompressor relocatable later on, one thing less to relocate. And make sure that the length of the new unified early SCLP buffer is no less than the length of the removed sclp_info_sccb buffer which might be larger than the length of the sclp_early_sccb buffer. Signed-off-by: Alexander Egorenkov Acked-by: Heiko Carstens Reviewed-by: Vasily Gorbik Signed-off-by: Heiko Carstens

s390/sclp: provide extended sccb support

2020-11-18T11:16:02Z

As the number of cpus increases, the sccb response can exceed 4k for read cpu and read scp info sclp commands. Hence, all cpu info entries cant be embedded within a sccb response Solution: To overcome this limitation, extended sccb facility is provided by sclp. 1. Check if the extended sccb facility is installed. 2. If extended sccb is installed, perform the read scp and read cpu command considering a max sccb length of three page size. This max length is based on factors like max cpus, sccb header. 3. If extended sccb is not installed, perform the read scp and read cpu sclp command considering a max sccb length of one page size. Signed-off-by: Sumanth Korikkar Reviewed-by: Vasily Gorbik Signed-off-by: Heiko Carstens

s390/sclp: Add support for SCLP AP adapter config/deconfig

2020-10-07T19:50:00Z

Add support for AP bus adapter config and deconfig to the sclp core code. The code is statically build into the kernel when ZCRYPT is configured either as module or with static support. This is the base functionality for having configure/deconfigure support in the AP bus and card code. Another patch will exploit this soon. Signed-off-by: Harald Freudenberger Suggested-by: Pierre Morel Signed-off-by: Vasily Gorbik