linux-dev/arch/s390/include/asm/smp.h, branch linus/master

s390: remove invalid email address of Heiko Carstens

2022-02-06T22:31:29Z

Remove my old invalid email address which can be found in a couple of files. Instead of updating it, just remove my contact data completely from source files. We have git and other tools which allow to figure out who is responsible for what with recent contact data. Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik

s390/topology: fix topology information when calling cpu hotplug notifiers

2021-09-07T11:38:41Z

The cpu hotplug notifiers are called without updating the core/thread masks when a new CPU is added. This causes problems with code setting up data structures in a cpu hotplug notifier, and relying on that later in normal code. This caused a crash in the new core scheduling code (SCHED_CORE), where rq->core was set up in a notifier depending on cpu masks. To fix this, add a cpu_setup_mask which is used in update_cpu_masks() instead of the cpu_online_mask to determine whether the cpu masks should be set for a certain cpu. Also move update_cpu_masks() to update the masks before calling notify_cpu_starting() so that the notifiers are seeing the updated masks. Signed-off-by: Sven Schnelle Cc: [hca@linux.ibm.com: get rid of cpu_online_mask handling] Signed-off-by: Heiko Carstens

KVM: s390: diag9c (directed yield) forwarding

2021-03-09T09:16:26Z

When we intercept a DIAG_9C from the guest we verify that the target real CPU associated with the virtual CPU designated by the guest is running and if not we forward the DIAG_9C to the target real CPU. To avoid a diag9c storm we allow a maximal rate of diag9c forwarding. The rate is calculated as a count per second defined as a new parameter of the s390 kvm module: diag9c_forwarding_hz . The default value of 0 is to not forward diag9c. Signed-off-by: Pierre Morel Link: https://lore.kernel.org/r/1613997661-22525-2-git-send-email-pmorel@linux.ibm.com Reviewed-by: Cornelia Huck Signed-off-by: Christian Borntraeger

s390: remove orphaned function declarations

2020-09-30T10:09:54Z

arch/s390/pci/pci_bus.h: zpci_bus_init - only declaration left after commit 05bc1be6db4b ("s390/pci: create zPCI bus") arch/s390/include/asm/gmap.h: gmap_pte_notify - only declaration left after commit 4be130a08420 ("s390/mm: add shadow gmap support") arch/s390/include/asm/pgalloc.h: rcu_table_freelist_finish - only declaration left after commit 36409f6353fc ("[S390] use generic RCU page-table freeing code") arch/s390/include/asm/tlbflush.h: smp_ptlb_all - only declaration left after commit 5a79859ae0f3 ("s390: remove 31 bit support") arch/s390/include/asm/vtimer.h: init_cpu_vtimer - only declaration left after commit b5f87f15e200 ("s390/idle: consolidate idle functions and definitions") arch/s390/include/asm/pci.h: zpci_debug_info - only declaration left after commit 386aa051fb4b ("s390/pci: remove per device debug attribute") arch/s390/include/asm/vdso.h: vdso_alloc_boot_cpu - only declaration left after commit 4bff8cb54502 ("s390: convert to GENERIC_VDSO") arch/s390/include/asm/smp.h: smp_vcpu_scheduled - only declaration left after commit 67626fadd269 ("s390: enforce CONFIG_SMP") arch/s390/kernel/entry.h: restart_call_handler - only declaration left after commit 8b646bd75908 ("[S390] rework smp code") arch/s390/kernel/entry.h: startup_init_nobss - only declaration left after commit 2e83e0eb85ca ("s390: clean .bss before running uncompressed kernel") arch/s390/kernel/entry.h: s390_early_resume - only declaration left after commit 394216275c7d ("s390: remove broken hibernate / power management support") drivers/s390/char/raw3270.h: raw3270_request_alloc_bootmem - only declaration left after commit 33403dcfcdfd ("[S390] 3270 console: convert from bootmem to slab") drivers/s390/cio/device.h: ccw_device_schedule_sch_unregister - only declaration left after commit 37de53bb5290 ("[S390] cio: introduce ccw device todos") drivers/s390/char/tape.h: tape_hotplug_event - has only declaration since recorded git history. drivers/s390/char/tape.h: tape_oper_handler - has only declaration since recorded git history. drivers/s390/char/tape.h: tape_noper_handler - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_check_locate - only declaration left after commit 161beff8f40d ("s390/tape: remove tape block leftovers") drivers/s390/char/tape_std.h: tape_std_default_handler - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_unexpect_uchk_handler - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_irq - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_has_failed - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_succeded - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_do_retry - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_read_opposite - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_HWBUG - has only declaration since recorded git history. Reviewed-by: Sven Schnelle Signed-off-by: Vasily Gorbik

Merge tag 'locking-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-08-03T21:39:35Z

Pull locking updates from Ingo Molnar: - LKMM updates: mostly documentation changes, but also some new litmus tests for atomic ops. - KCSAN updates: the most important change is that GCC 11 now has all fixes in place to support KCSAN, so GCC support can be enabled again. Also more annotations. - futex updates: minor cleanups and simplifications - seqlock updates: merge preparatory changes/cleanups for the 'associated locks' facilities. - lockdep updates: - simplify IRQ trace event handling - add various new debug checks - simplify header dependencies, split out , decouple lockdep from other low level headers some more - fix NMI handling - misc cleanups and smaller fixes * tag 'locking-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits) kcsan: Improve IRQ state trace reporting lockdep: Refactor IRQ trace events fields into struct seqlock: lockdep assert non-preemptibility on seqcount_t write lockdep: Add preemption enabled/disabled assertion APIs seqlock: Implement raw_seqcount_begin() in terms of raw_read_seqcount() seqlock: Add kernel-doc for seqcount_t and seqlock_t APIs seqlock: Reorder seqcount_t and seqlock_t API definitions seqlock: seqcount_t latch: End read sections with read_seqcount_retry() seqlock: Properly format kernel-doc code samples Documentation: locking: Describe seqlock design and usage locking/qspinlock: Do not include atomic.h from qspinlock_types.h locking/atomic: Move ATOMIC_INIT into linux/types.h lockdep: Move list.h inclusion into lockdep.h locking/lockdep: Fix TRACE_IRQFLAGS vs. NMIs futex: Remove unused or redundant includes futex: Consistently use fshared as boolean futex: Remove needless goto's futex: Remove put_futex_key() rwsem: fix commas in initialisation docs: locking: Replace HTTP links with HTTPS ones ...

s390: Break cyclic percpu include

2020-07-10T10:00:02Z

In order to use in irqflags.h, we need to make sure asm/percpu.h does not itself depend on irqflags.h Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Ingo Molnar Link: https://lkml.kernel.org/r/20200623083721.396143816@infradead.org

s390/smp: move smp_cpus_done() to header file

2020-07-03T08:49:08Z

Saves us a couple of bytes. Signed-off-by: Heiko Carstens

s390: add machine check SIGP

2020-05-28T10:21:42Z

This will be used with the upcoming entry.S changes to signal that there's a machine check pending that cannot be handled in the Machine check handler itself. Reviewed-by: Christian Borntraeger Signed-off-by: Sven Schnelle Signed-off-by: Vasily Gorbik

s390/cpuinfo: show processor physical address

2020-03-23T12:41:53Z

Show CPU physical address as reported by STAP instruction Signed-off-by: Alexander Gordeev Reviewed-by: Heiko Carstens Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik

s390: enforce CONFIG_HOTPLUG_CPU

2019-06-07T08:09:42Z

x86 and powerpc (partially) enforce already CONFIG_HOTPLUG_CPU. On s390 it is enabled on all distributions by default since ages. The only exception is our zfcpdump kernel. However to simplify testing, enforce HOTPLUG_CPU. This was suggested by Paul McKenney, since his rcutorture test environments for CONFIG_SMP=y only support HOTPLUG_CPU=y. Suggested-by: Paul E. McKenney Acked-by: Christian Borntraeger Signed-off-by: Heiko Carstens