linux-dev/arch/s390/lib/Makefile, branch linus/master

s390/nospec: add an option to use thunk-extern

2022-03-10T14:58:17Z

Currently with -mindirect-branch=thunk and -mfunction-return=thunk compiler options expoline thunks are put into individual COMDAT group sections. s390 is the only architecture which has group sections and it has implications for kpatch and objtool tools support. Using -mindirect-branch=thunk-extern and -mfunction-return=thunk-extern is an alternative, which comes with a need to generate all required expoline thunks manually. Unfortunately modules area is too far away from the kernel image, and expolines from the kernel image cannon be used. But since all new distributions (except Debian) build kernels for machine generations newer than z10, where "exrl" instruction is available, that leaves only 16 expolines thunks possible. Provide an option to build the kernel with -mindirect-branch=thunk-extern and -mfunction-return=thunk-extern for z10 or newer. This also requires to postlink expoline thunks into all modules explicitly. Currently modules already contain most expolines anyhow. Unfortunately -mindirect-branch=thunk-extern and -mfunction-return=thunk-extern options support is broken in gcc <= 11.2. Additional compile test is required to verify proper gcc support. Acked-by: Ilya Leoshkevich Co-developed-by: Sumanth Korikkar Signed-off-by: Sumanth Korikkar Signed-off-by: Vasily Gorbik

s390/module: test loading modules with a lot of relocations

2022-01-24T08:10:59Z

Add a test in order to prevent regressions. Signed-off-by: Ilya Leoshkevich Reviewed-by: Heiko Carstens Cc: Vasily Gorbik Cc: Christian Borntraeger Signed-off-by: Heiko Carstens

kprobes: add testcases for s390

2021-10-04T07:49:37Z

Add a few testcases to make sure that it's not possible to place a kprobe in the mid of an instruction on s390. Signed-off-by: Sven Schnelle Acked-by: Heiko Carstens Signed-off-by: Vasily Gorbik

s390: enable HAVE_FUNCTION_ERROR_INJECTION

2020-07-27T08:33:28Z

This kernel feature is required for enabling BPF_KPROBE_OVERRIDE. Define override_function_with_return() and regs_set_return_value() functions, and fix compile errors in syscall_wrapper.h. Signed-off-by: Ilya Leoshkevich Signed-off-by: Heiko Carstens

s390/unwind: add a test for the internal API

2019-11-30T09:52:46Z

unwind_for_each_frame can take at least 8 different sets of parameters. Add a test to make sure they all are handled in a sane way. Reviewed-by: Heiko Carstens Signed-off-by: Ilya Leoshkevich Co-developed-by: Vasily Gorbik Signed-off-by: Vasily Gorbik

s390: clean .bss before running uncompressed kernel

2019-08-21T10:58:52Z

Clean uncompressed kernel .bss section in the startup code before the uncompressed kernel is executed. At this point of time initrd and certificates have been already rescued. Uncompressed kernel .bss size is known from vmlinux_info. It is also taken into consideration during uncompressed kernel positioning by kaslr (so it is safe to clean it). With that uncompressed kernel is starting with .bss section zeroed and no .bss section usage restrictions apply. Which makes chkbss checks for uncompressed kernel objects obsolete and they can be removed. early_nobss.c is also not needed anymore. Parts of it which are still relevant are moved to early.c. Kasan initialization code is now called directly from head64 (early.c is instrumented and should not be executed before kasan shadow memory is set up). Reviewed-by: Philipp Rudo Signed-off-by: Vasily Gorbik

s390: enforce CONFIG_SMP

2019-06-07T08:09:37Z

There never have been distributions that shiped with CONFIG_SMP=n for s390. In addition the kernel currently doesn't even compile with CONFIG_SMP=n for s390. Most likely it wouldn't even work, even if we fix the compile error, since nobody tests it, since there is no use case that I can think of. Therefore simply enforce CONFIG_SMP and get rid of some more or less unused code. Reviewed-by: Christian Borntraeger Signed-off-by: Heiko Carstens

s390/kasan: avoid user access code instrumentation

2018-10-09T09:21:21Z

Kasan instrumentation adds "store" check for variables marked as modified by inline assembly. With user pointers containing addresses from another address space this produces false positives. static inline unsigned long clear_user_xc(void __user *to, ...) { asm volatile( ... : "+a" (to) ... User space access functions are wrapped by manually instrumented functions in kasan common code, which should be sufficient to catch errors. So, we just disable uaccess.o instrumentation altogether. Reviewed-by: Martin Schwidefsky Signed-off-by: Vasily Gorbik Signed-off-by: Martin Schwidefsky

s390: introduce compile time check for empty .bss section

2018-05-09T08:55:01Z

Introduce compile time check for files which should avoid using .bss section, because of the following reasons: - .bss section has not been zeroed yet, - initrd has not been moved to a safe location and could be overlapping with .bss section. Reviewed-by: Heiko Carstens Signed-off-by: Vasily Gorbik Signed-off-by: Martin Schwidefsky

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman