linux-dev/arch/s390/pci, branch master

s390/pci: add missing EX_TABLE entries to __pcistg_mio_inuser()/__pcilg_mio_inuser()

2022-10-26T12:47:31Z

For some exception types the instruction address points behind the instruction that caused the exception. Take that into account and add the missing exception table entry. Cc: Fixes: f058599e22d5 ("s390/pci: Fix s390_mmio_read/write with MIO") Reviewed-by: Niklas Schnelle Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik

Merge tag 's390-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2022-10-09T20:51:40Z

Pull s390 updates from Vasily Gorbik: - Make use of the IBM z16 processor activity instrumentation facility extension to count neural network processor assist operations: add a new PMU device driver so that perf can make use of this. - Rework memcpy_real() to avoid DAT-off mode. - Rework absolute lowcore access code. - Various small fixes and improvements all over the code. * tag 's390-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: remove unused bus_next field from struct zpci_dev s390/cio: remove unused ccw_device_force_console() declaration s390/pai: Add support for PAI Extension 1 NNPA counters s390/mm: fix no previous prototype warnings in maccess.c s390/mm: uninline copy_oldmem_kernel() function s390/mm,ptdump: add real memory copy page markers s390/mm: rework memcpy_real() to avoid DAT-off mode s390/dump: save IPL CPU registers once DAT is available s390/pci: convert high_memory to physical address s390/smp,ptdump: add absolute lowcore markers s390/smp: rework absolute lowcore access s390/smp: call smp_reinit_ipl_cpu() before scheduler is available s390/ptdump: add missing amode31 markers s390/mm: split lowcore pages with set_memory_4k() s390/mm: remove unused access parameter from do_fault_error() s390/delay: sync comment within __delay() with reality s390: move from strlcpy with unused retval to strscpy

s390/pci: convert high_memory to physical address

2022-09-14T14:46:00Z

We use high_memory as a measure for amount of memory available in determining the required minimum size of our IOVA space with the assumption that one rarely maps more than the available memory for DMA. In special cases like mapping significant amounts of memory more than once this can still be tuned with the s390_iommu_apterture kernel parameter. In this use case high_memory is treated as a physical address. As high_memory is a virtual address however this means we need to convert it using virt_to_phys() before use Note that at the moment physical and virtual addresses are identical so this mismatch does not currently cause trouble. Reviewed-by: Matthew Rosato Signed-off-by: Niklas Schnelle Signed-off-by: Vasily Gorbik

KVM: s390: pci: Hook to access KVM lowlevel from VFIO

2022-08-29T11:29:28Z

We have a cross dependency between KVM and VFIO when using s390 vfio_pci_zdev extensions for PCI passthrough To be able to keep both subsystem modular we add a registering hook inside the S390 core code. This fixes a build problem when VFIO is built-in and KVM is built as a module. Reported-by: Randy Dunlap Reported-by: kernel test robot Reviewed-by: Matthew Rosato Reviewed-by: Niklas Schnelle Signed-off-by: Pierre Morel Fixes: 09340b2fca007 ("KVM: s390: pci: add routines to start/stop interpretive execution") Cc: Acked-by: Janosch Frank Acked-by: Randy Dunlap # build-tested Link: https://lore.kernel.org/r/20220819122945.9309-1-pmorel@linux.ibm.com Message-Id: <20220819122945.9309-1-pmorel@linux.ibm.com> Signed-off-by: Janosch Frank

Merge tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2022-08-05T02:30:35Z

Pull pci updates from Bjorn Helgaas: "Enumeration: - Consolidate duplicated 'next function' scanning and extend to allow 'isolated functions' on s390, similar to existing hypervisors (Niklas Schnelle) Resource management: - Implement pci_iobar_pfn() for sparc, which allows us to remove the sparc-specific pci_mmap_page_range() and pci_mmap_resource_range(). This removes the ability to map the entire PCI I/O space using /proc/bus/pci, but we believe that's already been broken since v2.6.28 (Arnd Bergmann) - Move common PCI definitions to asm-generic/pci.h and rework others to be be more specific and more encapsulated in arches that need them (Stafford Horne) Power management: - Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas) Virtualization: - Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate the functions but don't advertise an ACS capability (Pavan Chebbi) Error handling: - Clear PCI Status register during enumeration in case firmware left errors logged (Kai-Heng Feng) - When we have native control of AER, enable error reporting for all devices that support AER. Previously only a few drivers enabled this (Stefan Roese) - Keep AER error reporting enabled for switches. Previously we enabled this during enumeration but immediately disabled it (Stefan Roese) - Iterate over error counters instead of error strings to avoid printing junk in AER sysfs counters (Mohamed Khalfella) ASPM: - Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g., via sysfs, are not lost across power state changes (Kai-Heng Feng) Endpoint framework: - Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie) Endpoint embedded DMA controller driver: - Simplify and clean up support for the DesignWare embedded DMA (eDMA) controller (Frank Li, Serge Semin) Broadcom STB PCIe controller driver: - Avoid config space accesses when link is down because we can't recover from the CPU aborts these cause (Jim Quinlan) - Look for power regulators described under Root Ports in DT and enable them before scanning the secondary bus (Jim Quinlan) - Disable/enable regulators in suspend/resume (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Simplify and clean up clock and PHY management (Richard Zhu) - Disable/enable regulators in suspend/resume (Richard Zhu) - Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu) - Allow speeds faster than Gen2 (Richard Zhu) - Make link being down a non-fatal error so controller probe doesn't fail if there are no Endpoints connected (Richard Zhu) Loongson PCIe controller driver: - Add ACPI and MCFG support for Loongson LS7A (Huacai Chen) - Avoid config reads to non-existent LS2K/LS7A devices because a hardware defect causes machine hangs (Huacai Chen) - Work around LS7A integrated devices that report incorrect Interrupt Pin values (Jianmin Lv) Marvell Aardvark PCIe controller driver: - Add support for AER and Slot capability on emulated bridge (Pali Rohár) MediaTek PCIe controller driver: - Add Airoha EN7532 to DT binding (John Crispin) - Allow building of driver for ARCH_AIROHA (Felix Fietkau) MediaTek PCIe Gen3 controller driver: - Print decoded LTSSM state when the link doesn't come up (Jianjun Wang) NVIDIA Tegra194 PCIe controller driver: - Convert DT binding to json-schema (Vidya Sagar) - Add DT bindings and driver support for Tegra234 Root Port and Endpoint mode (Vidya Sagar) - Fix some Root Port interrupt handling issues (Vidya Sagar) - Set default Max Payload Size to 256 bytes (Vidya Sagar) - Fix Data Link Feature capability programming (Vidya Sagar) - Extend Endpoint mode support to devices beyond Controller-5 (Vidya Sagar) Qualcomm PCIe controller driver: - Rework clock, reset, PHY power-on ordering to avoid hangs and improve consistency (Robert Marko, Christian Marangi) - Move pipe_clk handling to PHY drivers (Dmitry Baryshkov) - Add IPQ60xx support (Selvam Sathappan Periakaruppan) - Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru) - Add support for more than 32 MSI interrupts (Dmitry Baryshkov) Renesas R-Car PCIe controller driver: - Convert DT binding to json-schema (Herve Codina) - Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver (Herve Codina) Samsung Exynos PCIe controller driver: - Fix phy-exynos-pcie driver so it follows the 'phy_init() before phy_power_on()' PHY programming model (Marek Szyprowski) Synopsys DesignWare PCIe controller driver: - Simplify and clean up the DWC core extensively (Serge Semin) - Fix an issue with programming the ATU for regions that cross a 4GB boundary (Serge Semin) - Enable the CDM check if 'snps,enable-cdm-check' exists; previously we skipped it if 'num-lanes' was absent (Serge Semin) - Allocate a 32-bit DMA-able page to be MSI target instead of using a driver data structure that may not be addressable with 32-bit address (Will McVicker) - Add DWC core support for more than 32 MSI interrupts (Dmitry Baryshkov) Xilinx Versal CPM PCIe controller driver: - Add DT binding and driver support for Versal CPM5 Gen5 Root Port (Bharat Kumar Gogada)" * tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits) PCI: imx6: Support more than Gen2 speed link mode PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers PCI: imx6: Reformat suspend callback to keep symmetric with resume PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier PCI: imx6: Disable clocks in reverse order of enable PCI: imx6: Do not hide PHY driver callbacks and refine the error handling PCI: imx6: Reduce resume time by only starting link if it was up before suspend PCI: imx6: Mark the link down as non-fatal error PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset() PCI: imx6: Turn off regulator when system is in suspend mode PCI: imx6: Call host init function directly in resume PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks PCI: imx6: Propagate .host_init() errors to caller PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() PCI: imx6: Factor out ref clock disable to match enable PCI: imx6: Move imx6_pcie_clk_disable() earlier PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier PCI: imx6: Move PHY management functions together PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS() ...

s390/pci: allow zPCI zbus without a function zero

2022-07-22T21:06:13Z

Currently the zPCI code blocks PCI bus creation and probing of a zPCI zbus unless there is a PCI function with devfn 0. This is always the case for the PCI functions with hidden RID, but may keep PCI functions from a multi-function PCI device with RID information invisible until the function 0 becomes visible. Worse, as a PCI bus is necessary to even present a PCI hotplug slot, even that remains invisible. With the probing of these so-called isolated PCI functions enabled for s390 in common code, this restriction is no longer necessary. On network cards with multiple ports and a PF per port this also allows using each port on its own while still providing the physical PCI topology information in the devfn needed to associate VFs with their parent PF. Link: https://lore.kernel.org/r/20220628143100.3228092-6-schnelle@linux.ibm.com Signed-off-by: Niklas Schnelle Signed-off-by: Bjorn Helgaas Reviewed-by: Pierre Morel

KVM: s390: pci: add routines to start/stop interpretive execution

2022-07-11T07:54:33Z

These routines will be invoked at the time an s390x vfio-pci device is associated with a KVM (or when the association is removed), allowing the zPCI device to enable or disable load/store intepretation mode; this requires the host zPCI device to inform firmware of the unique token (GISA designation) that is associated with the owning KVM. Signed-off-by: Matthew Rosato Acked-by: Pierre Morel Link: https://lore.kernel.org/r/20220606203325.110625-17-mjrosato@linux.ibm.com Signed-off-by: Christian Borntraeger

KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding

2022-07-11T07:54:32Z

These routines will be wired into a kvm ioctl in order to respond to requests to enable / disable a device for Adapter Event Notifications / Adapter Interuption Forwarding. Reviewed-by: Christian Borntraeger Acked-by: Niklas Schnelle Signed-off-by: Matthew Rosato Link: https://lore.kernel.org/r/20220606203325.110625-16-mjrosato@linux.ibm.com Signed-off-by: Christian Borntraeger

KVM: s390: pci: do initial setup for AEN interpretation

2022-07-11T07:54:28Z

Initial setup for Adapter Event Notification Interpretation for zPCI passthrough devices. Specifically, allocate a structure for forwarding of adapter events and pass the address of this structure to firmware. Reviewed-by: Christian Borntraeger Signed-off-by: Matthew Rosato Link: https://lore.kernel.org/r/20220606203325.110625-13-mjrosato@linux.ibm.com Signed-off-by: Christian Borntraeger

s390/pci: stash dtsm and maxstbl

2022-07-11T07:54:24Z

Store information about what IOAT designation types are supported by underlying hardware as well as the largest store block size allowed. These values will be needed by passthrough. Reviewed-by: Niklas Schnelle Reviewed-by: Pierre Morel Reviewed-by: Christian Borntraeger Signed-off-by: Matthew Rosato Link: https://lore.kernel.org/r/20220606203325.110625-10-mjrosato@linux.ibm.com Signed-off-by: Christian Borntraeger