linux-dev/arch/um/drivers/Makefile, branch master

um: xterm: Make default terminal emulator configurable

2022-05-27T06:50:07Z

Make the default terminal emulator configurable so e.g. Debian can set it to x-terminal-emulator instead of the current default of xterm. Signed-off-by: Johannes Berg Acked-By: Anton Ivanov Tested-by: Ritesh Raj Sarraf Signed-off-by: Richard Weinberger

um: add PCI over virtio emulation driver

2021-06-17T19:45:43Z

To support testing of PCI/PCIe drivers in UML, add a PCI bus support driver. This driver uses virtio, which in UML is really just vhost-user, to talk to devices, and adds the devices to the virtual PCI bus in the system. Since virtio already allows DMA/bus mastering this really isn't all that hard, of course we need the logic_iomem infrastructure that was added by a previous patch. The protocol to talk to the device is has a few fairly simple messages for reading to/writing from config and IO spaces, and messages for the device to send the various interrupts (INT#, MSI/MSI-X and while suspended PME#). Note that currently no offical virtio device ID is assigned for this protocol, as a consequence this patch requires defining it in the Kconfig, with a default that makes the driver refuse to work at all. Finally, in order to add support for MSI/MSI-X interrupts, some small changes are needed in the UML IRQ code, it needs to have more interrupts, changing NR_IRQS from 64 to 128 if this driver is enabled, but not actually use them for anything so that the generic IRQ domain/MSI infrastructure can allocate IRQ numbers. Signed-off-by: Johannes Berg Signed-off-by: Richard Weinberger

um: add a pseudo RTC

2021-02-12T20:38:52Z

Add a pseudo RTC that simply is able to send an alarm signal waking up the system at a given time in the future. Since apparently timerfd_create() FDs don't support SIGIO, we use the sigio-creating helper thread, which just learned to do suspend/resume properly in the previous patch. For time-travel mode, OTOH, just add an event at the specified time in the future, and that's already sufficient to wake up the system at that point in time since suspend will just be in an "endless wait". For s2idle support also call pm_system_wakeup(). Signed-off-by: Johannes Berg Signed-off-by: Richard Weinberger

um: do not evaluate compiler's library path when cleaning

2020-05-12T04:28:32Z

Since commit a83e4ca26af8 ("kbuild: remove cc-option switch from -Wframe-larger-than="), 'make ARCH=um clean' emits an error message as follows: $ make ARCH=um clean gcc: error: missing argument to '-Wframe-larger-than=' We do not care compiler flags when cleaning. Use the '=' operator for lazy expansion because we do not use LDFLAGS_pcap.o or LDFLAGS_vde.o when cleaning. While I was here, I removed the redundant -r option because it already exists in the recipe. Fixes: a83e4ca26af8 ("kbuild: remove cc-option switch from -Wframe-larger-than=") Signed-off-by: Masahiro Yamada Reviewed-by: Nathan Chancellor Tested-by: Nathan Chancellor [build]

um: Add SPDX headers for files in arch/um/drivers

2019-09-15T19:37:16Z

Convert files to use SPDX header. All files are licensed under the GPLv2. Signed-off-by: Alex Dewar Signed-off-by: Richard Weinberger

um: drivers: Add virtio vhost-user driver

2019-09-15T19:37:15Z

This module allows virtio devices to be used over a vhost-user socket. Signed-off-by: Erel Geron Signed-off-by: Johannes Berg Signed-off-by: Richard Weinberger

kbuild: change ld_flags to contain LDFLAGS_$(@F)

2018-07-18T23:40:27Z

Put $(LDFLAGS_$(@F)) into ld_flags so that $(LDFLAGS_pcap.o) and $(LDFLAGS_vde.o) in arch/um/drivers/Makefile are absorbed. Signed-off-by: Masahiro Yamada Acked-by: Kirill A. Shutemov

High Performance UML Vector Network Driver

2018-02-19T18:38:51Z

1. Provides infrastructure for vector IO using recvmmsg/sendmmsg. 1.1. Multi-message read. 1.2. Multi-message write. 1.3. Optimized queue support for multi-packet enqueue/dequeue. 1.4. BQL/DQL support. 2. Implements transports for several transports as well support for direct wiring of PWEs to NIC. Allows direct connection of VMs to host, other VMs and network devices with no switch in use. 2.1. Raw socket >4 times higher PPS and 10 times higher tcp RX than existing pcap based transport (> 4Gbit) 2.2. New tap transport using socket RX and tap xmit. Similar performance improvements (>4Gbit) 2.3. GRE transport - direct wiring to GRE PWE 2.4. L2TPv3 transport - direct wiring to L2TPv3 PWE 3. Tuning, performance and offload related setting support via ethtool. 4. Initial BPF support - used in tap/raw to avoid software looping 5. Scatter Gather support. 6. VNET and checksum offload support for raw socket transport. 7. TSO/GSO support where applicable or available 8. Migrates all error messages to netdevice_*() and rate limits them where needed. Signed-off-by: Anton Ivanov Signed-off-by: Richard Weinberger

um: add ucast ethernet transport

2011-05-25T15:39:41Z

The ucast transport is similar to the mcast transport (and, in fact, shares most of its code), only it uses UDP unicast to move packets. Obviously this is only useful for point-to-point connections between virtual ethernet devices. Signed-off-by: Nolan Leake Signed-off-by: Richard Weinberger Cc: David Miller Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

x86, um: get rid of arch/um/os symlink

2008-10-23T05:55:22Z

we can get DEV_NULL defined for arch/um/drivers/null.c in less convoluted ways, TYVM... Signed-off-by: Al Viro Signed-off-by: H. Peter Anvin