linux-dev/arch/x86/entry/calling.h, branch linus/master

x86/entry: Fix register corruption in compat syscall

2022-05-19T21:46:08Z

A panic was reported in the init process on AMD: Run /sbin/init as init process init[1]: segfault at f7fd5ca0 ip 00000000f7f5bbc7 sp 00000000ffa06aa0 error 7 in libc.so[f7f51000+4e000] Code: 8a 44 24 10 88 41 ff 8b 44 24 10 83 c4 2c 5b 5e 5f 5d c3 53 83 ec 08 8b 5c 24 10 81 fb 00 f0 ff ff 76 0c e8 ba dc ff ff f7 db <89> 18 83 cb ff 83 c4 08 89 d8 5b c3 e8 81 60 ff ff 05 28 84 07 00 Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU: 1 PID: 1 Comm: init Tainted: G W 5.18.0-rc7-next-20220519 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack_lvl+0x57/0x7d panic+0x10f/0x28d do_exit.cold+0x18/0x48 do_group_exit+0x2e/0xb0 get_signal+0xb6d/0xb80 arch_do_signal_or_restart+0x31/0x760 ? show_opcodes.cold+0x1c/0x21 ? force_sig_fault+0x49/0x70 exit_to_user_mode_prepare+0x131/0x1a0 irqentry_exit_to_user_mode+0x5/0x30 asm_exc_page_fault+0x27/0x30 RIP: 0023:0xf7f5bbc7 Code: 8a 44 24 10 88 41 ff 8b 44 24 10 83 c4 2c 5b 5e 5f 5d c3 53 83 ec 08 8b 5c 24 10 81 fb 00 f0 ff ff 76 0c e8 ba dc ff ff f7 db <89> 18 83 cb ff 83 c4 08 89 d8 5b c3 e8 81 60 ff ff 05 28 84 07 00 RSP: 002b:00000000ffa06aa0 EFLAGS: 00000217 RAX: 00000000f7fd5ca0 RBX: 000000000000000c RCX: 0000000000001000 RDX: 0000000000000001 RSI: 00000000f7fd5b60 RDI: 00000000f7fd5b60 RBP: 00000000f7fd1c1c R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 The task's CX register got corrupted by commit 8c42819b61b8 ("x86/entry: Use PUSH_AND_CLEAR_REGS for compat"), which overlooked the fact that compat SYSCALL apparently stores the user's CX value in BP. Before that commit, CX was saved from its stashed value in BP: pushq %rbp /* pt_regs->cx (stashed in bp) */ But then it got changed to: pushq %rcx /* pt_regs->cx */ So the wrong value got saved and later restored back to the user. Fix it by pushing the correct value again (BP) for regs->cx. Fixes: 8c42819b61b8 ("x86/entry: Use PUSH_AND_CLEAR_REGS for compat") Reported-by: Guenter Roeck Signed-off-by: Josh Poimboeuf Signed-off-by: Peter Zijlstra (Intel) Tested-by: Guenter Roeck Link: https://lkml.kernel.org/r/b5a26592c9dd60bbacdf97974a7433fd802a5593.1652985970.git.jpoimboe@kernel.org

x86/entry: Remove skip_r11rcx

2022-05-06T13:58:19Z

Yes, r11 and rcx have been restored previously, but since they're being popped anyway (into rsi) might as well pop them into their own regs -- setting them to the value they already are. Less magical code. Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Borislav Petkov Link: https://lore.kernel.org/r/20220506121631.365070674@infradead.org

x86/entry: Use PUSH_AND_CLEAR_REGS for compat

2022-05-06T13:57:02Z

Since the upper regs don't exist for ia32 code, preserving them doesn't hurt and it simplifies the code. This doesn't add any attack surface that would not already be available through INT80. Notably: - 32bit SYSENTER: didn't clear si, dx, cx. - 32bit SYSCALL, INT80: *do* clear si since the C functions don't take a second argument. - 64bit: didn't clear si since the C functions take a second argument; except the error_entry path might have only one argument, so clearing si was missing here. 32b SYSENTER should be clearing all those 3 registers, nothing uses them and selftests pass. Unconditionally clear rsi since it simplifies code. Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Borislav Petkov Reviewed-by: Borislav Petkov Link: https://lore.kernel.org/r/20220506121631.293889636@infradead.org

x86/entry: Split PUSH_AND_CLEAR_REGS into two submacros

2021-05-12T08:49:15Z

PUSH_AND_CLEAR_REGS, as the name implies, performs two functions: pushing registers and clearing registers. They don't necessarily have to be performed in immediate sequence, although all current users do. Split it into two macros for the case where that isn't desired; the FRED enabling patchset will eventually make use of this. Signed-off-by: H. Peter Anvin (Intel) Signed-off-by: Ingo Molnar Link: https://lore.kernel.org/r/20210510185316.3307264-6-hpa@zytor.com

x86/entry: Unify definitions from and

2021-05-12T08:49:13Z

The register offsets in are duplicated in entry/calling.h, but are formatted differently and therefore not compatible. Use the version from consistently. Signed-off-by: H. Peter Anvin (Intel) Signed-off-by: Ingo Molnar Link: https://lore.kernel.org/r/20210510185316.3307264-2-hpa@zytor.com

x86/entry/64: Do not include inst.h in calling.h

2020-09-04T08:59:21Z

inst.h was included in calling.h solely to instantiate the RDPID macro. The usage of RDPID was removed in 6a3ea3e68b8a ("x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM") so remove the include. Fixes: 6a3ea3e68b8a ("x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM") Signed-off-by: Uros Bizjak Signed-off-by: Borislav Petkov Link: https://lkml.kernel.org/r/20200827171735.93825-1-ubizjak@gmail.com

x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM

2020-08-21T14:15:27Z

KVM has an optmization to avoid expensive MRS read/writes on VMENTER/EXIT. It caches the MSR values and restores them either when leaving the run loop, on preemption or when going out to user space. The affected MSRs are not required for kernel context operations. This changed with the recently introduced mechanism to handle FSGSBASE in the paranoid entry code which has to retrieve the kernel GSBASE value by accessing per CPU memory. The mechanism needs to retrieve the CPU number and uses either LSL or RDPID if the processor supports it. Unfortunately RDPID uses MSR_TSC_AUX which is in the list of cached and lazily restored MSRs, which means between the point where the guest value is written and the point of restore, MSR_TSC_AUX contains a random number. If an NMI or any other exception which uses the paranoid entry path happens in such a context, then RDPID returns the random guest MSR_TSC_AUX value. As a consequence this reads from the wrong memory location to retrieve the kernel GSBASE value. Kernel GS is used to for all regular this_cpu_*() operations. If the GSBASE in the exception handler points to the per CPU memory of a different CPU then this has the obvious consequences of data corruption and crashes. As the paranoid entry path is the only place which accesses MSR_TSX_AUX (via RDPID) and the fallback via LSL is not significantly slower, remove the RDPID alternative from the entry path and always use LSL. The alternative would be to write MSR_TSC_AUX on every VMENTER and VMEXIT which would be inflicting massive overhead on that code path. [ tglx: Rewrote changelog ] Fixes: eaad981291ee3 ("x86/entry/64: Introduce the FIND_PERCPU_BASE macro") Reported-by: Tom Lendacky Debugged-by: Tom Lendacky Suggested-by: Andy Lutomirski Suggested-by: Peter Zijlstra Signed-off-by: Sean Christopherson Signed-off-by: Paolo Bonzini Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20200821105229.18938-1-pbonzini@redhat.com

x86/entry/64: Handle FSGSBASE enabled paranoid entry/exit

2020-06-18T13:47:04Z

Without FSGSBASE, user space cannot change GSBASE other than through a PRCTL. The kernel enforces that the user space GSBASE value is postive as negative values are used for detecting the kernel space GSBASE value in the paranoid entry code. If FSGSBASE is enabled, user space can set arbitrary GSBASE values without kernel intervention, including negative ones, which breaks the paranoid entry assumptions. To avoid this, paranoid entry needs to unconditionally save the current GSBASE value independent of the interrupted context, retrieve and write the kernel GSBASE and unconditionally restore the saved value on exit. The restore happens either in paranoid_exit or in the special exit path of the NMI low level code. All other entry code pathes which use unconditional SWAPGS are not affected as they do not depend on the actual content. [ tglx: Massaged changelogs and comments ] Suggested-by: H. Peter Anvin Suggested-by: Andy Lutomirski Suggested-by: Thomas Gleixner Signed-off-by: Chang S. Bae Signed-off-by: Thomas Gleixner Signed-off-by: Sasha Levin Signed-off-by: Thomas Gleixner Link: https://lkml.kernel.org/r/1557309753-24073-13-git-send-email-chang.seok.bae@intel.com Link: https://lkml.kernel.org/r/20200528201402.1708239-12-sashal@kernel.org

x86/entry/64: Introduce the FIND_PERCPU_BASE macro

2020-06-18T13:47:04Z

GSBASE is used to find per-CPU data in the kernel. But when GSBASE is unknown, the per-CPU base can be found from the per_cpu_offset table with a CPU NR. The CPU NR is extracted from the limit field of the CPUNODE entry in GDT, or by the RDPID instruction. This is a prerequisite for using FSGSBASE in the low level entry code. Also, add the GAS-compatible RDPID macro as binutils 2.23 do not support it. Support is added in version 2.27. [ tglx: Massaged changelog ] Suggested-by: H. Peter Anvin Signed-off-by: Chang S. Bae Signed-off-by: Thomas Gleixner Signed-off-by: Sasha Levin Signed-off-by: Thomas Gleixner Link: https://lkml.kernel.org/r/1557309753-24073-12-git-send-email-chang.seok.bae@intel.com Link: https://lkml.kernel.org/r/20200528201402.1708239-11-sashal@kernel.org

x86/entry: Remove the apic/BUILD interrupt leftovers

2020-06-11T13:15:16Z

Remove all the code which was there to emit the system vector stubs. All users are gone. Move the now unused GET_CR2_INTO macro muck to head_64.S where the last user is. Fixup the eye hurting comment there while at it. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Acked-by: Andy Lutomirski Link: https://lore.kernel.org/r/20200521202119.927433002@linutronix.de