linux-dev/arch/x86/kernel/head_64.S, branch linus/master

Merge tag 'x86_tdx_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2022-05-24T00:51:12Z

Pull Intel TDX support from Borislav Petkov: "Intel Trust Domain Extensions (TDX) support. This is the Intel version of a confidential computing solution called Trust Domain Extensions (TDX). This series adds support to run the kernel as part of a TDX guest. It provides similar guest protections to AMD's SEV-SNP like guest memory and register state encryption, memory integrity protection and a lot more. Design-wise, it differs from AMD's solution considerably: it uses a software module which runs in a special CPU mode called (Secure Arbitration Mode) SEAM. As the name suggests, this module serves as sort of an arbiter which the confidential guest calls for services it needs during its lifetime. Just like AMD's SNP set, this series reworks and streamlines certain parts of x86 arch code so that this feature can be properly accomodated" * tag 'x86_tdx_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits) x86/tdx: Fix RETs in TDX asm x86/tdx: Annotate a noreturn function x86/mm: Fix spacing within memory encryption features message x86/kaslr: Fix build warning in KASLR code in boot stub Documentation/x86: Document TDX kernel architecture ACPICA: Avoid cache flush inside virtual machines x86/tdx/ioapic: Add shared bit for IOAPIC base address x86/mm: Make DMA memory shared for TD guest x86/mm/cpa: Add support for TDX shared memory x86/tdx: Make pages shared in ioremap() x86/topology: Disable CPU online/offline control for TDX guests x86/boot: Avoid #VE during boot for TDX platforms x86/boot: Set CR0.NE early and keep it set during the boot x86/acpi/x86/boot: Add multiprocessor wake-up support x86/boot: Add a trampoline for booting APs via firmware handoff x86/tdx: Wire up KVM hypercalls x86/tdx: Port I/O: Add early boot support x86/tdx: Port I/O: Add runtime hypercalls x86/boot: Port I/O: Add decompression-time support for TDX x86/boot: Port I/O: Allow to hook up alternative helpers ...

x86/boot: Avoid #VE during boot for TDX platforms

2022-04-07T15:27:53Z

There are a few MSRs and control register bits that the kernel normally needs to modify during boot. But, TDX disallows modification of these registers to help provide consistent security guarantees. Fortunately, TDX ensures that these are all in the correct state before the kernel loads, which means the kernel does not need to modify them. The conditions to avoid are: * Any writes to the EFER MSR * Clearing CR4.MCE This theoretically makes the guest boot more fragile. If, for instance, EFER was set up incorrectly and a WRMSR was performed, it will trigger early exception panic or a triple fault, if it's before early exceptions are set up. However, this is likely to trip up the guest BIOS long before control reaches the kernel. In any case, these kinds of problems are unlikely to occur in production environments, and developers have good debug tools to fix them quickly. Change the common boot code to work on TDX and non-TDX systems. This should have no functional effect on non-TDX systems. Signed-off-by: Sean Christopherson Signed-off-by: Kuppuswamy Sathyanarayanan Signed-off-by: Kirill A. Shutemov Signed-off-by: Dave Hansen Reviewed-by: Andi Kleen Reviewed-by: Dan Williams Reviewed-by: Thomas Gleixner Link: https://lkml.kernel.org/r/20220405232939.73860-24-kirill.shutemov@linux.intel.com

x86/head/64: Re-enable stack protection

2022-04-06T15:06:55Z

Due to 103a4908ad4d ("x86/head/64: Disable stack protection for head$(BITS).o") kernel/head{32,64}.c are compiled with -fno-stack-protector to allow a call to set_bringup_idt_handler(), which would otherwise have stack protection enabled with CONFIG_STACKPROTECTOR_STRONG. While sufficient for that case, there may still be issues with calls to any external functions that were compiled with stack protection enabled that in-turn make stack-protected calls, or if the exception handlers set up by set_bringup_idt_handler() make calls to stack-protected functions. Subsequent patches for SEV-SNP CPUID validation support will introduce both such cases. Attempting to disable stack protection for everything in scope to address that is prohibitive since much of the code, like the SEV-ES #VC handler, is shared code that remains in use after boot and could benefit from having stack protection enabled. Attempting to inline calls is brittle and can quickly balloon out to library/helper code where that's not really an option. Instead, re-enable stack protection for head32.c/head64.c, and make the appropriate changes to ensure the segment used for the stack canary is initialized in advance of any stack-protected C calls. For head64.c: - The BSP will enter from startup_64() and call into C code (startup_64_setup_env()) shortly after setting up the stack, which may result in calls to stack-protected code. Set up %gs early to allow for this safely. - APs will enter from secondary_startup_64*(), and %gs will be set up soon after. There is one call to C code prior to %gs being setup (__startup_secondary_64()), but it is only to fetch 'sme_me_mask' global, so just load 'sme_me_mask' directly instead, and remove the now-unused __startup_secondary_64() function. For head32.c: - BSPs/APs will set %fs to __BOOT_DS prior to any C calls. In recent kernels, the compiler is configured to access the stack canary at %fs:__stack_chk_guard [1], which overlaps with the initial per-cpu '__stack_chk_guard' variable in the initial/"master" .data..percpu area. This is sufficient to allow access to the canary for use during initial startup, so no changes are needed there. [1] 3fb0fdb3bbe7 ("x86/stackprotector/32: Make the canary into a regular percpu variable") [ bp: Massage commit message. ] Suggested-by: Joerg Roedel #for 64-bit %gs set up Signed-off-by: Michael Roth Signed-off-by: Brijesh Singh Signed-off-by: Borislav Petkov Link: https://lore.kernel.org/r/20220307213356.2797205-24-brijesh.singh@amd.com

x86/sev: Detect/setup SEV/SME features earlier in boot

2022-04-06T11:02:26Z

sme_enable() handles feature detection for both SEV and SME. Future patches will also use it for SEV-SNP feature detection/setup, which will need to be done immediately after the first #VC handler is set up. Move it now in preparation. Signed-off-by: Michael Roth Signed-off-by: Brijesh Singh Signed-off-by: Borislav Petkov Reviewed-by: Venu Busireddy Link: https://lore.kernel.org/r/20220307213356.2797205-9-brijesh.singh@amd.com

x86/ibt,sev: Annotations

2022-03-15T09:32:41Z

No IBT on AMD so far.. probably correct, who knows. Signed-off-by: Peter Zijlstra (Intel) Acked-by: Josh Poimboeuf Link: https://lore.kernel.org/r/20220308154318.995109889@infradead.org

x86/ibt: Annotate text references

2022-03-15T09:32:40Z

Annotate away some of the generic code references. This is things where we take the address of a symbol for exception handling or return addresses (eg. context switch). Signed-off-by: Peter Zijlstra (Intel) Acked-by: Josh Poimboeuf Link: https://lore.kernel.org/r/20220308154318.877758523@infradead.org

x86/ibt,entry: Sprinkle ENDBR dust

2022-03-15T09:32:35Z

Kernel entry points should be having ENDBR on for IBT configs. The SYSCALL entry points are found through taking their respective address in order to program them in the MSRs, while the exception entry points are found through UNWIND_HINT_IRET_REGS. The rule is that any UNWIND_HINT_IRET_REGS at sym+0 should have an ENDBR, see the later objtool ibt validation patch. Signed-off-by: Peter Zijlstra (Intel) Acked-by: Josh Poimboeuf Link: https://lore.kernel.org/r/20220308154317.933157479@infradead.org

x86/ibt,xen: Sprinkle the ENDBR

2022-03-15T09:32:35Z

Even though Xen currently doesn't advertise IBT, prepare for when it will eventually do so and sprinkle the ENDBR dust accordingly. Even though most of the entry points are IRET like, the CPL0 Hypervisor can set WAIT-FOR-ENDBR and demand ENDBR at these sites. Signed-off-by: Peter Zijlstra (Intel) Acked-by: Josh Poimboeuf Link: https://lore.kernel.org/r/20220308154317.873919996@infradead.org

x86/entry,xen: Early rewrite of restore_regs_and_return_to_kernel()

2022-03-15T09:32:34Z

By doing an early rewrite of 'jmp native_iret` in restore_regs_and_return_to_kernel() we can get rid of the last INTERRUPT_RETURN user and paravirt_iret. Suggested-by: Andrew Cooper Signed-off-by: Peter Zijlstra (Intel) Acked-by: Josh Poimboeuf Link: https://lore.kernel.org/r/20220308154317.815039833@infradead.org

x86/mm/64: Flush global TLB on boot and AP bringup

2021-12-06T08:38:48Z

The AP bringup code uses the trampoline_pgd page-table which establishes global mappings in the user range of the address space. Flush the global TLB entries after the indentity mappings are removed so no stale entries remain in the TLB. Signed-off-by: Joerg Roedel Signed-off-by: Borislav Petkov Link: https://lore.kernel.org/r/20211202153226.22946-3-joro@8bytes.org