linux-dev/arch/x86/kvm/debugfs.c, branch linus/master

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2022-01-16T14:15:14Z

Pull kvm updates from Paolo Bonzini: "RISCV: - Use common KVM implementation of MMU memory caches - SBI v0.2 support for Guest - Initial KVM selftests support - Fix to avoid spurious virtual interrupts after clearing hideleg CSR - Update email address for Anup and Atish ARM: - Simplification of the 'vcpu first run' by integrating it into KVM's 'pid change' flow - Refactoring of the FP and SVE state tracking, also leading to a simpler state and less shared data between EL1 and EL2 in the nVHE case - Tidy up the header file usage for the nvhe hyp object - New HYP unsharing mechanism, finally allowing pages to be unmapped from the Stage-1 EL2 page-tables - Various pKVM cleanups around refcounting and sharing - A couple of vgic fixes for bugs that would trigger once the vcpu xarray rework is merged, but not sooner - Add minimal support for ARMv8.7's PMU extension - Rework kvm_pgtable initialisation ahead of the NV work - New selftest for IRQ injection - Teach selftests about the lack of default IPA space and page sizes - Expand sysreg selftest to deal with Pointer Authentication - The usual bunch of cleanups and doc update s390: - fix sigp sense/start/stop/inconsistency - cleanups x86: - Clean up some function prototypes more - improved gfn_to_pfn_cache with proper invalidation, used by Xen emulation - add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery - completely remove potential TOC/TOU races in nested SVM consistency checks - update some PMCs on emulated instructions - Intel AMX support (joint work between Thomas and Intel) - large MMU cleanups - module parameter to disable PMU virtualization - cleanup register cache - first part of halt handling cleanups - Hyper-V enlightened MSR bitmap support for nested hypervisors Generic: - clean up Makefiles - introduce CONFIG_HAVE_KVM_DIRTY_RING - optimize memslot lookup using a tree - optimize vCPU array usage by converting to xarray" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (268 commits) x86/fpu: Fix inline prefix warnings selftest: kvm: Add amx selftest selftest: kvm: Move struct kvm_x86_state to header selftest: kvm: Reorder vcpu_load_state steps for AMX kvm: x86: Disable interception for IA32_XFD on demand x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state() kvm: selftests: Add support for KVM_CAP_XSAVE2 kvm: x86: Add support for getting/setting expanded xstate buffer x86/fpu: Add uabi_size to guest_fpu kvm: x86: Add CPUID support for Intel AMX kvm: x86: Add XCR0 support for Intel AMX kvm: x86: Disable RDMSR interception of IA32_XFD_ERR kvm: x86: Emulate IA32_XFD_ERR for guest kvm: x86: Intercept #NM for saving IA32_XFD_ERR x86/fpu: Prepare xfd_err in struct fpu_guest kvm: x86: Add emulation for IA32_XFD x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2 x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM x86/fpu: Add guest support to xfd_enable_feature() ...

KVM: x86: Check for rmaps allocation

2022-01-07T17:04:01Z

With TDP MMU being the default now, access to mmu_rmaps_stat debugfs file causes following oops: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 3185 Comm: cat Not tainted 5.16.0-rc4+ #204 RIP: 0010:pte_list_count+0x6/0x40 Call Trace: ? kvm_mmu_rmaps_stat_show+0x15e/0x320 seq_read_iter+0x126/0x4b0 ? aa_file_perm+0x124/0x490 seq_read+0xf5/0x140 full_proxy_read+0x5c/0x80 vfs_read+0x9f/0x1a0 ksys_read+0x67/0xe0 __x64_sys_read+0x19/0x20 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fca6fc13912 Return early when rmaps are not present. Reported-by: Vasant Hegde Tested-by: Vasant Hegde Signed-off-by: Nikunj A Dadhania Reviewed-by: Peter Xu Reviewed-by: Sean Christopherson Message-Id: <20220105040337.4234-1-nikunj@amd.com> Cc: stable@vger.kernel.org Fixes: 3bcd0662d66f ("KVM: X86: Introduce mmu_rmaps_stat per-vm debugfs file") Signed-off-by: Paolo Bonzini

KVM: Keep memslots in tree-based structures instead of array-based ones

2021-12-08T09:24:34Z

The current memslot code uses a (reverse gfn-ordered) memslot array for keeping track of them. Because the memslot array that is currently in use cannot be modified every memslot management operation (create, delete, move, change flags) has to make a copy of the whole array so it has a scratch copy to work on. Strictly speaking, however, it is only necessary to make copy of the memslot that is being modified, copying all the memslots currently present is just a limitation of the array-based memslot implementation. Two memslot sets, however, are still needed so the VM continues to run on the currently active set while the requested operation is being performed on the second, currently inactive one. In order to have two memslot sets, but only one copy of actual memslots it is necessary to split out the memslot data from the memslot sets. The memslots themselves should be also kept independent of each other so they can be individually added or deleted. These two memslot sets should normally point to the same set of memslots. They can, however, be desynchronized when performing a memslot management operation by replacing the memslot to be modified by its copy. After the operation is complete, both memslot sets once again point to the same, common set of memslot data. This commit implements the aforementioned idea. For tracking of gfns an ordinary rbtree is used since memslots cannot overlap in the guest address space and so this data structure is sufficient for ensuring that lookups are done quickly. The "last used slot" mini-caches (both per-slot set one and per-vCPU one), that keep track of the last found-by-gfn memslot, are still present in the new code. Co-developed-by: Sean Christopherson Signed-off-by: Sean Christopherson Signed-off-by: Maciej S. Szmigiero Message-Id: <17c0cf3663b760a0d3753d4ac08c0753e941b811.1638817641.git.maciej.szmigiero@oracle.com>

KVM: X86: Introduce mmu_rmaps_stat per-vm debugfs file

2021-08-20T20:06:11Z

Use this file to dump rmap statistic information. The statistic is done by calculating the rmap count and the result is log-2-based. An example output of this looks like (idle 6GB guest, right after boot linux): Rmap_Count: 0 1 2-3 4-7 8-15 16-31 32-63 64-127 128-255 256-511 512-1023 Level=4K: 3086676 53045 12330 1272 502 121 76 2 0 0 0 Level=2M: 5947 231 0 0 0 0 0 0 0 0 0 Level=1G: 32 0 0 0 0 0 0 0 0 0 0 Signed-off-by: Peter Xu Message-Id: <20210730220455.26054-5-peterx@redhat.com> Signed-off-by: Paolo Bonzini

KVM: nVMX: nSVM: Add a new VCPU statistic to show if VCPU is in guest mode

2021-06-17T17:09:36Z

Add the following per-VCPU statistic to KVM debugfs to show if a given VCPU is in guest mode: guest_mode Also add this as a per-VM statistic to KVM debugfs to show the total number of VCPUs that are in guest mode in a given VM. Signed-off-by: Krish Sadhukhan Message-Id: <20210609180340.104248-3-krish.sadhukhan@oracle.com> Signed-off-by: Paolo Bonzini

KVM: let kvm_destroy_vm_debugfs clean up vCPU debugfs directories

2020-06-04T15:00:54Z

After commit 63d0434 ("KVM: x86: move kvm_create_vcpu_debugfs after last failure point") we are creating the pre-vCPU debugfs files after the creation of the vCPU file descriptor. This makes it possible for userspace to reach kvm_vcpu_release before kvm_create_vcpu_debugfs has finished. The vcpu->debugfs_dentry then does not have any associated inode anymore, and this causes a NULL-pointer dereference in debugfs_create_file. The solution is simply to avoid removing the files; they are cleaned up when the VM file descriptor is closed (and that must be after KVM_CREATE_VCPU returns). We can stop storing the dentry in struct kvm_vcpu too, because it is not needed anywhere after kvm_create_vcpu_debugfs returns. Reported-by: syzbot+705f4401d5a93a59b87d@syzkaller.appspotmail.com Fixes: 63d04348371b ("KVM: x86: move kvm_create_vcpu_debugfs after last failure point") Signed-off-by: Paolo Bonzini

KVM: no need to check return value of debugfs_create functions

2019-08-05T10:55:49Z

When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Also, when doing this, change kvm_arch_create_vcpu_debugfs() to return void instead of an integer, as we should not care at all about if this function actually does anything or not. Cc: Paolo Bonzini Cc: "Radim Krčmář" Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Borislav Petkov Cc: "H. Peter Anvin" Cc: Cc: Signed-off-by: Greg Kroah-Hartman Signed-off-by: Paolo Bonzini

KVM: remove kvm_arch_has_vcpu_debugfs()

2019-08-05T10:55:48Z

There is no need for this function as all arches have to implement kvm_arch_create_vcpu_debugfs() no matter what. A #define symbol let us actually simplify the code. Signed-off-by: Paolo Bonzini

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499

2019-06-19T15:09:53Z

Based on 1 normalized pattern(s): this work is licensed under the terms of the gnu gpl version 2 see the copying file in the top level directory extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 35 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Kate Stewart Reviewed-by: Enrico Weigelt Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.797835076@linutronix.de Signed-off-by: Greg Kroah-Hartman

KVM: LAPIC: Expose per-vCPU timer_advance_ns to userspace

2019-05-24T19:27:09Z

Expose per-vCPU timer_advance_ns to userspace, so it is able to query the auto-adjusted value. Cc: Paolo Bonzini Cc: Radim Krčmář Cc: Sean Christopherson Cc: Liran Alon Signed-off-by: Wanpeng Li Signed-off-by: Paolo Bonzini