linux-dev/arch/x86/pci/Makefile, branch master

x86/PCI: Replace deprecated EXTRA_CFLAGS with ccflags-y

2019-11-21T13:49:27Z

Update arch/x86/pci/Makefile replacing the deprecated EXTRA_CFLAGS with the ccflags-y matching recommendation per section 3.7 of Documentation/kbuild/makefiles.txt. Link: https://lore.kernel.org/r/20190819060532.17093-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski Signed-off-by: Bjorn Helgaas

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

x86/PCI: VMD: Move VMD driver to drivers/pci/host

2016-10-04T17:26:37Z

Move the driver source and Kconfig to the PCI host bridge drivers directory and move the config option to a more appropriate sub-menu instead of occupying the top-level location. Update the Kconfig option with the X86_64 dependency that was implicitly included from the previous location, and add information about the module name when built as a loadable module. Signed-off-by: Keith Busch Signed-off-by: Bjorn Helgaas CC: Jon Derrick

x86/PCI: Add driver for Intel Volume Management Device (VMD)

2016-01-15T19:54:55Z

The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch Signed-off-by: Bjorn Helgaas Acked-by: Thomas Gleixner (IRQ-related parts)

x86, platforms: Remove NUMAQ

2014-02-27T16:07:39Z

The NUMAQ support seems to be unmaintained, remove it. Cc: Paul Gortmaker Cc: David Rientjes Acked-by: Paul E. McKenney Signed-off-by: H. Peter Anvin Link: http://lkml.kernel.org/r/n/530CFD6C.7040705@zytor.com

x86, platforms: Remove SGI Visual Workstation

2014-02-27T16:07:39Z

The SGI Visual Workstation seems to be dead; remove support so we don't have to continue maintaining it. Cc: Andrey Panin Cc: Michael Reed Link: http://lkml.kernel.org/r/530CFD6C.7040705@zytor.com Signed-off-by: H. Peter Anvin

intel_mid: Renamed mrst to intel_mid

2013-10-17T23:40:36Z

Following files contains code that is common to all intel mid soc's. So renamed them as below. mrst/mrst.c -> intel-mid/intel-mid.c mrst/vrtc.c -> intel-mid/intel_mid_vrtc.c mrst/early_printk_mrst.c -> intel-mid/intel_mid_vrtc.c pci/mrst.c -> pci/intel_mid_pci.c Also, renamed the corresponding header files and made changes to the driver files that included these header files. To ensure that there are no functional changes, I have compared the objdump of renamed files before and after rename and found that the only difference is file name change. Signed-off-by: Kuppuswamy Sathyanarayanan Link: http://lkml.kernel.org/r/1382049336-21316-4-git-send-email-david.a.cohen@linux.intel.com Signed-off-by: David Cohen Signed-off-by: H. Peter Anvin

x86/PCI: Add NumaChip remote PCI support

2012-12-07T21:24:32Z

Add NumaChip-specific PCI access mechanism via MMCONFIG cycles, but preventing access to AMD Northbridges which shouldn't respond. Signed-off-by: Daniel J Blueman Signed-off-by: Bjorn Helgaas

x86, platform: Initial support for sta2x11 I/O hub

2012-04-12T18:10:30Z

The "ConneXt" sta2x11 I/O Hub is a bridge from PCIe to AMBA, and is used as main chipset in some Atom boards. The set of peripherals it exports live in an AMBA bus internal to the chip, so a custom remapping of addresses is needed. This is implemented by fixup calls for the PCI deivices, based on CONFIG_X86_DEV_DMA_OPS and CONFIG_X86_DMA_REMAP . Signed-off-by: Alessandro Rubini Link: http://lkml.kernel.org/r/ddca670ca8180e52d49b3fe642742ddd23ab2cb2.1333560789.git.rubini@gnudd.com Acked-by: Giancarlo Asnaghi Cc: Alan Cox Signed-off-by: H. Peter Anvin

x86/PCI: build amd_bus.o only when CONFIG_AMD_NB=y

2012-01-12T15:54:18Z

We only need amd_bus.o for AMD systems with PCI. arch/x86/pci/Makefile already depends on CONFIG_PCI=y, so this patch just adds the dependency on CONFIG_AMD_NB. Cc: Yinghai Lu Cc: stable@kernel.org # 2.6.34+ (needs adjustment for k8 -> amd rename) Signed-off-by: Bjorn Helgaas Signed-off-by: Linus Torvalds