linux-dev/drivers/acpi/acpica/Makefile, branch master

ACPICA: Remove PCI bits from ACPICA when CONFIG_PCI is unset

2018-12-20T09:19:49Z

Allow ACPI to be built without PCI support in place. Signed-off-by: Sinan Kaya Signed-off-by: Rafael J. Wysocki

ACPICA: Split large interpreter file

2018-10-04T07:06:27Z

New file: exserial.c Signed-off-by: Bob Moore Signed-off-by: Erik Schmauss Signed-off-by: Rafael J. Wysocki

Merge branch 'acpica'

2017-11-13T00:36:58Z

* acpica: ACPICA: Update version to 20170831 ACPICA: Update acpi_get_timer for 64-bit interface to acpi_hw_read ACPICA: String conversions: Update to add new behaviors ACPICA: String conversions: Cleanup/format comments. No functional changes ACPICA: Restructure/cleanup all string-to-integer conversion functions ACPICA: Header support for the PDTT ACPI table ACPICA: acpiexec: Add testability of deferred table verification ACPICA: Hardware: Enable 64-bit support of hardware accesses

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

ACPICA: Restructure/cleanup all string-to-integer conversion functions

2017-10-03T23:43:06Z

ACPICA commit 610046d444ad781cc36673bf1f030abe50cbc61f Improve adherence to ACPI spec for implicit and explicit conversions Adds octal support for constants in ASL code Adds integer overflow errors for constants during ASL compilation Eliminates most of the existing complex flags parameters Simplify support for implicit/explicit runtime conversions Adds one new file, utilities/utstrsuppt.c Link: https://github.com/acpica/acpica/commit/610046d444ad Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki

ACPICA: Implement deferred resolution of reference package elements

2017-08-03T21:34:17Z

ACPICA commit 0c08790c56fdf0dc081ae869495a09d8c4230854 This change defers the resolution of package elements that are named references until after the entire namespace has been loaded from the definition block. This allows such references to be in fact forward references for both module level code and control methods. Link: https://github.com/acpica/acpica/commit/0c08790c Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki

ACPICA: Split resource descriptor decode strings to a new file

2017-06-27T20:25:20Z

ACPICA commit 00906ae0aff4c6b76abc232ef99700e7d7c0e325 There are enough of these strings to justify a separate file. Also, these strings are only used for the disassembler and the debugger. Thus, this change improves ACPICA modularity. Link: https://github.com/acpica/acpica/commit/00906ae0 Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki

ACPICA: Add non-linux host build support

2017-04-11T20:11:09Z

_LINUX: used to detect a target build is a linux kernel/application. __linux__: used to detect a build is on a linux hosts. Thus we can see: if a linux kernel build is performed on environments other than linux hosts, __linux__ may not be defined by the compiler and _LINUX cannot cover linux kernel resident ACPICA files, as it's only defined in and hence only allows non ACPICA kernel files to correctly include aclinux.h. As a conclusion, we don't actually support such build. This patch adds -D_LINUX for ACPICA files so that kernel builds on any hosts can use unified _LINUX as a linux kernel target indication to correctly include aclinux.h. Tested-by: Al Stone Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki

ACPICA: Cleanup for all string-to-integer conversions

2016-09-10T00:37:59Z

ACPICA commit e2e72a351201fd58e4694418859ae2c247dafca0 Consolidate multiple versions of strtoul64 to one common version. limit possible bases to either 10 or 16. Handles both implicit and explicit conversions. Added a 2-character ascii-to-hex function for GPEs and buffers. Adds a new file, utstrtoul64.c Link: https://github.com/acpica/acpica/commit/e2e72a35 Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki

ACPICA: Move all ASCII utilities to a common file

2016-05-05T13:22:28Z

ACPICA commit ba60e4500053010bf775d58f6f61febbdb94d817 New file is utascii.c Link: https://github.com/acpica/acpica/commit/ba60e450 Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki