linux-dev/drivers/base/power, branch linus/master

Merge tag 'thermal-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2022-05-24T23:19:30Z

Pull thermal control updates from Rafael Wysocki: "These add a thermal library and thermal tools to wrap the netlink interface into event-based callbacks, improve overheat condition handling during suspend-to-idle on Intel SoCs, add some new hardware support, fix bugs and clean up code. Specifics: - Add thermal library and thermal tools to encapsulate the netlink into event based callbacks (Daniel Lezcano, Jiapeng Chong). - Improve overheat condition handling during suspend-to-idle in the Intel PCH thermal driver (Zhang Rui). - Use local ops instead of global ops in devfreq_cooling (Kant Fan). - Clean up _OSC handling in int340x (Davidlohr Bueso). - Switch hisi_termal from CONFIG_PM_SLEEP guards to pm_sleep_ptr() (Hesham Almatary). - Add new k3 j72xx bangdap driver and the corresponding bindings (Keerthy). - Fix missing of_node_put() in the SC iMX driver at probe time (Miaoqian Lin). - Fix memory leak in __thermal_cooling_device_register() when device_register() fails by calling thermal_cooling_device_destroy_sysfs() (Yang Yingliang). - Add sc8180x and sc8280xp compatible string in the DT bindings and lMH support for QCom tsens driver (Bjorn Andersson). - Fix OTP Calibration Register values conforming to the documentation on RZ/G2L and bindings documentation for RZ/G2UL (Biju Das). - Fix type in kerneldoc description for __thermal_bind_params (Corentin Labbe). - Fix potential NULL dereference in sr_thermal_probe() on Broadcom platform (Zheng Yongjun). - Add change mode ops to the thermal-of sensor (Manaf Meethalavalappu Pallikunhi). - Fix non-negative value support by preventing the value to be clamp to zero (Stefan Wahren). - Add compatible string and DT bindings for MSM8960 tsens driver (Dmitry Baryshkov). - Add hwmon support for K3 driver (Massimiliano Minella). - Refactor and add multiple generations support for QCom ADC driver (Jishnu Prakash). - Use platform_get_irq_optional() to get the interrupt on RCar driver and document Document RZ/V2L bindings (Lad Prabhakar). - Remove NULL check after container_of() call from the Intel HFI thermal driver (Haowen Bai)" * tag 'thermal-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (38 commits) thermal: intel: pch: improve the cooling delay log thermal: intel: pch: enhance overheat handling thermal: intel: pch: move cooling delay to suspend_noirq phase PM: wakeup: expose pm_wakeup_pending to modules thermal: k3_j72xx_bandgap: Add the bandgap driver support dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation thermal/drivers/imx_sc_thermal: Fix refcount leak in imx_sc_thermal_probe thermal/core: Fix memory leak in __thermal_cooling_device_register() dt-bindings: thermal: tsens: Add sc8280xp compatible dt-bindings: thermal: lmh: Add Qualcomm sc8180x compatible thermal/drivers/qcom/lmh: Add sc8180x compatible thermal/drivers/rz2gl: Fix OTP Calibration Register values dt-bindings: thermal: rzg2l-thermal: Document RZ/G2UL bindings thermal: thermal_of: fix typo on __thermal_bind_params tools/thermal: remove unneeded semicolon tools/lib/thermal: remove unneeded semicolon thermal/drivers/broadcom: Fix potential NULL dereference in sr_thermal_probe tools/thermal: Add thermal daemon skeleton tools/thermal: Add a temperature capture tool tools/thermal: Add util library ...

Merge branch 'pm-domains'

2022-05-23T17:51:31Z

Merge generlic power domains update for 5.19-rc1: - Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski). - Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf Hansson). - Improve the way genpd deals with its governors (Ulf Hansson). * pm-domains: PM: domains: Trust domain-idle-states from DT to be correct by genpd PM: domains: Measure power-on/off latencies in genpd based on a governor PM: domains: Allocate governor data dynamically based on a genpd governor PM: domains: Clean up some code in pm_genpd_init() and genpd_remove() PM: domains: Fix initialization of genpd's next_wakeup PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd PM: domains: Measure suspend/resume latencies in genpd based on governor PM: domains: Move the next_wakeup variable into the struct gpd_timing_data PM: domains: Allocate gpd_timing_data dynamically based on governor PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain() PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd PM: domains: Drop redundant code for genpd always-on governor PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor PM: domains: Move genpd's time-accounting to ktime_get_mono_fast_ns() PM: domains: Extend dev_pm_domain_detach() doc

Merge branches 'pm-core', 'pm-sleep' and 'powercap'

2022-05-23T17:06:33Z

Merge PM core changes, updates related to system sleep and power capping updates for 5.19-rc1: - Export dev_pm_ops instead of suspend() and resume() in the IIO chemical scd30 driver (Jonathan Cameron). - Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and PM-runtime counterparts (Jonathan Cameron). - Move symbol exports in the IIO chemical scd30 driver into the IIO_SCD30 namespace (Jonathan Cameron). - Avoid device PM-runtime usage count underflows (Rafael Wysocki). - Allow dynamic debug to control printing of PM messages (David Cohen). - Fix some kernel-doc comments in hibernation code (Yang Li, Haowen Bai). - Preserve ACPI-table override during hibernation (Amadeusz Sławiński). - Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson). - Make Intel RAPL power capping driver support the RaptorLake and AlderLake N processors (Zhang Rui, Sumeet Pawnikar). - Remove redundant store to value after multiply in the RAPL power capping driver (Colin Ian King). * pm-core: PM: runtime: Avoid device usage count underflows iio: chemical: scd30: Move symbol exports into IIO_SCD30 namespace PM: core: Add NS varients of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and runtime pm equiv iio: chemical: scd30: Export dev_pm_ops instead of suspend() and resume() * pm-sleep: cpuidle: PSCI: Improve support for suspend-to-RAM for PSCI OSI mode PM: runtime: Allow to call __pm_runtime_set_status() from atomic context PM: hibernate: Don't mark comment as kernel-doc x86/ACPI: Preserve ACPI-table override during hibernation PM: hibernate: Fix some kernel-doc comments PM: sleep: enable dynamic debug support within pm_pr_dbg() PM: sleep: Narrow down -DDEBUG on kernel/power/ files * powercap: powercap: intel_rapl: remove redundant store to value after multiply powercap: intel_rapl: add support for ALDERLAKE_N powercap: RAPL: Add Power Limit4 support for RaptorLake powercap: intel_rapl: add support for RaptorLake

PM: domains: Trust domain-idle-states from DT to be correct by genpd

2022-05-19T18:16:05Z

If genpd has parsed the domain-idle-states from DT, it's reasonable to believe that the parsed data should be correct for the HW in question. Based upon this, it seem superfluous to let genpd measure the corresponding power-on/off latencies for these states. Therefore, let's improve the behaviour in genpd by avoiding the measurements for the domain-idle-states that have been parsed from DT. Signed-off-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki

PM: domains: Measure power-on/off latencies in genpd based on a governor

2022-05-19T18:16:05Z

The measurements of the power-on|off latencies in genpd for a PM domain are superfluous, unless the corresponding genpd has a governor assigned to it, which would make use of the data. Therefore, let's improve the behaviour in genpd by making the measurements conditional, based upon if there's a governor assigned. Signed-off-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki

PM: domains: Allocate governor data dynamically based on a genpd governor

2022-05-19T18:16:05Z

If a genpd doesn't have an associated governor assigned, several variables in the struct generic_pm_domain becomes superfluous. Rather than wasting memory in allocated genpds, let's move the variables from the struct generic_pm_domain into a new separate struct. In this way, we can instead dynamically decide when we need to allocate the corresponding data for it. Signed-off-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki

PM: domains: Clean up some code in pm_genpd_init() and genpd_remove()

2022-05-19T18:16:05Z

To improve the readability of the code, let's move the parts that deals with allocation/freeing of data, into two separate functions. Signed-off-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki

PM: domains: Fix initialization of genpd's next_wakeup

2022-05-19T18:16:05Z

In the genpd governor we walk the list of child-domains to take into account their next_wakeup. If the child-domain itself, doesn't have a governor assigned to it, we can end up using the next_wakeup value before it has been properly initialized. To prevent a possible incorrect behaviour in the governor, let's initialize next_wakeup to KTIME_MAX. Fixes: c79aa080fb0f ("PM: domains: use device's next wakeup to determine domain idle state") Signed-off-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki

PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd

2022-05-19T18:16:05Z

When an IRQ safe device is attached to a non-IRQ safe PM domain, genpd needs to prevent the PM domain from being powered off. However, genpd still allows the device to be runtime suspended/resumed, hence it's also reasonable to think that a governor may be used to validate the QoS latency constraints. Unfortunately, genpd_runtime_resume() treats the configuration above, as a reason to skip measuring the QoS resume latency for the device. This is a legacy behaviour that was earlier correct, but should have been changed when genpd was transformed into its current behaviour around how it manages IRQ safe devices. Luckily, there's no report about problems, so let's just fixup the behaviour. Signed-off-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki

PM: domains: Measure suspend/resume latencies in genpd based on governor

2022-05-19T18:16:05Z

The QoS latency measurements for devices in genpd_runtime_suspend|resume() are superfluous, unless the corresponding genpd has a governor assigned to it, which would make use of the data. Therefore, let's improve the behaviour in genpd by making the measurements conditional, based upon if there's a governor assigned. Signed-off-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki