linux-dev/drivers/clk/samsung/Makefile, branch master

clk: samsung: add top clock support for Exynos Auto v9 SoC

2022-05-10T17:19:34Z

This adds support for CMU_TOP which generates clocks for all the function blocks such as CORE, FSYS0/1/2, PERIC0/1 and so on. For CMU_TOP, PLL_SHARED0,1,2,3 and 4 will be the sources of this block and they will generate bus clocks. Signed-off-by: Chanho Park Signed-off-by: Sylwester Nawrocki Reviewed-by: Krzysztof Kozlowski Acked-by: Chanwoo Choi Link: https://lore.kernel.org/r/20220504075154.58819-4-chanho61.park@samsung.com

clk: samsung: fsd: Add initial clock support

2022-01-26T09:24:08Z

Add initial clock support for FSD (Full Self-Driving) SoC which is required to bring-up platforms based on this SoC. Cc: linux-fsd@tesla.com Signed-off-by: Jayati Sahu Signed-off-by: Ajay Kumar Signed-off-by: Pankaj Dubey Signed-off-by: Alim Akhtar Acked-by: Sylwester Nawrocki Link: https://lore.kernel.org/r/20220124141644.71052-5-alim.akhtar@samsung.com Signed-off-by: Krzysztof Kozlowski

clk: samsung: Add initial Exynos7885 clock driver

2021-12-19T22:39:01Z

This is an initial implementation adding basic clocks, such as UART, USI, I2C, WDT, ect. and their parent clocks. It is heavily based on the Exynos850 clock driver at 'drivers/clk/samsung/clk-exynos850.c' which was made by Sam Protsenko, thus the copyright and author lines were kept. Bus clocks are enabled by default as well to avoid hangs while trying to access CMU registers. Only the parts of CMU_TOP needed for CMU_CORE and CMU_PERI, a bit of CMU_CORE, and most of CMU_PERI is implemented as of now. Signed-off-by: David Virag Signed-off-by: Sylwester Nawrocki Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20211206153124.427102-7-virag.david003@gmail.com

clk: samsung: Make exynos850_register_cmu shared

2021-12-19T22:39:01Z

Rename exynos850_register_cmu to exynos_arm64_register_cmu and move it to a new file called "clk-exynos-arm64.c". This should have no functional changes, but it will allow this code to be shared between other arm64 Exynos SoCs, like the Exynos7885 and possibly ExynosAuto V9. Signed-off-by: David Virag Signed-off-by: Sylwester Nawrocki Reviewed-by: Sam Protsenko Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20211206153124.427102-5-virag.david003@gmail.com

clk: samsung: Introduce Exynos850 clock driver

2021-10-15T13:37:12Z

This is the initial implementation adding only basic clocks like UART, MMC, I2C and corresponding parent clocks. Design is influenced by Exynos5433 clock driver. Bus clock is enabled by default (in probe function) for all CMUs except CMU_TOP, the reasoning is as follows. By default if bus clock has no users its "enable count" value is 0. It might be actually running if it's already enabled in bootloader, but then in some cases it can be disabled by mistake. For example, such case was observed when dw_mci_probe() enabled the bus clock, then failed to do something and disabled that bus clock on error path. After that, even the attempt to read the 'clk_summary' file in DebugFS freezed forever, as CMU bus clock ended up being disabled and it wasn't possible to access CMU registers anymore. To avoid such cases, CMU driver must increment the ref count for that bus clock by running clk_prepare_enable(). There is already existing '.clk_name' field in struct samsung_cmu_info, exactly for that reason. It was added in commit 523d3de41f02 ("clk: samsung: exynos5433: Add support for runtime PM"), with next mentioning in commit message: > Also for each CMU there is one special parent clock, which has to be > enabled all the time when any access to CMU registers is being done. But that clock is actually only enabled in Exynos5433 clock driver right now. So the same code is added to exynos850_cmu_probe() function, As was described above, it might be helpful not only for PM reasons, but also to prevent possible erroneous clock gating on error paths. Another way to workaround that issue would be to use CLOCK_IS_CRITICAL flag for corresponding gate clocks. But that might be not very good design decision, as we might still want to disable that bus clock, e.g. on PM suspend. Signed-off-by: Sam Protsenko Reviewed-by: Krzysztof Kozlowski Acked-by: Chanwoo Choi Link: https://lore.kernel.org/r/20211008154352.19519-6-semen.protsenko@linaro.org Signed-off-by: Sylwester Nawrocki

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2020-12-21T18:39:37Z

Pull clk updates from Stephen Boyd: "The core framework got some nice improvements this time around. We gained the ability to get struct clk pointers from a struct clk_hw so that clk providers can consume the clks they provide, if they need to do something like that. This has been a long missing part of the clk provider API that will help us move away from exposing a struct clk pointer in the struct clk_hw. Tracepoints are added for the clk_set_rate() "range" functions, similar to the tracepoints we already have for clk_set_rate() and we added a column to debugfs to help developers understand the hardware enable state of clks in case firmware or bootloader state is different than what is expected. Overall the core changes are mostly improving the clk driver writing experience. At the driver level, we have the usual collection of driver updates and new drivers for new SoCs. This time around the Qualcomm folks introduced a good handful of clk drivers for various parts of three or four SoCs. The SiFive folks added a new clk driver for their FU740 SoCs, coming in second on the diffstat and then Atmel AT91 and Amlogic SoCs had lots of work done after that for various new features. One last thing to note in the driver area is that the i.MX driver has gained a new binding to support SCU clks after being on the list for many months. It uses a two cell binding which is sort of rare in clk DT bindings. Beyond that we have the usual set of driver fixes and tweaks that come from more testing and finding out that some configuration was wrong or that a driver could support being built as a module. Summary: Core: - Add some trace points for clk_set_rate() "range" functions - Add hardware enable information to clk_summary debugfs - Replace clk-provider.h with of_clk.h when possible - Add devm variant of clk_notifier_register() - Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw New Drivers: - Bindings for Canaan K210 SoC clks - Support for SiFive FU740 PRCI - Camera clks on Qualcomm SC7180 SoCs - GCC and RPMh clks on Qualcomm SDX55 SoCs - RPMh clks on Qualcomm SM8350 SoCs - LPASS clks on Qualcomm SM8250 SoCs Updates: - DVFS support for AT91 clk driver - Update git repo branch for Renesas clock drivers - Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U - Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E - Stop using __raw_*() I/O accessors in Renesas clk drivers - One more conversion of DT bindings to json-schema - Make i.MX clk-gate2 driver more flexible - New two cell binding for i.MX SCU clks - Drop of_match_ptr() in i.MX8 clk drivers - Add arch dependencies for Rockchip clk drivers - Fix i2s on Rockchip rk3066 - Add MIPI DSI clks on Amlogic axg and g12 SoCs - Support modular builds of Amlogic clk drivers - Fix an Amlogic Video PLL clock dependency - Samsung Kconfig dependencies updates for better compile test coverage - Refactoring of the Samsung PLL clocks driver - Small Tegra driver cleanups - Minor fixes to Ingenic and VC5 clk drivers - Cleanup patches to remove unused variables and plug memory leaks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) dt-binding: clock: Document canaan,k210-clk bindings dt-bindings: Add Canaan vendor prefix clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts" clk: ingenic: Fix divider calculation with div tables clk: sunxi-ng: Make sure divider tables have sentinel clk: s2mps11: Fix a resource leak in error handling paths in the probe function clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9 clk: si5351: Wait for bit clear after PLL reset clk: at91: sam9x60: remove atmel,osc-bypass support clk: at91: sama7g5: register cpu clock clk: at91: clk-master: re-factor master clock clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz clk: at91: sama7g5: decrease lower limit for MCK0 rate clk: at91: sama7g5: remove mck0 from parent list of other clocks clk: at91: clk-sam9x60-pll: allow runtime changes for pll clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics clk: at91: clk-master: add 5th divisor for mck master clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT dt-bindings: clock: at91: add sama7g5 pll defines clk: at91: sama7g5: fix compilation error ...

clk: samsung: Allow compile testing of Exynos, S3C64xx and S5Pv210

2020-11-23T09:25:45Z

So far all Exynos, S3C64xx and S5Pv210 clock units were selected by respective SOC/ARCH Kconfig option. On a kernel built for selected SoCs, this allowed to build only limited set of matching clock drivers. However compile testing was not possible in such case as Makefile object depends on SOC/ARCH option. Add separate Kconfig options for each of them to be able to compile test. Link: https://lore.kernel.org/r/20201119164509.754851-1-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski Acked-by: Chanwoo Choi Signed-off-by: Sylwester Nawrocki

clk: samsung: allow building the clkout driver as module

2020-11-12T16:18:40Z

The Exynos clock output driver can be built as module (it does not have to be part of core init process) for better customization. Adding a KConfig entry allows also compile testing for build coverage. Signed-off-by: Krzysztof Kozlowski Acked-by: Chanwoo Choi Acked-by: Sylwester Nawrocki Link: https://lore.kernel.org/r/20201110193749.261367-1-krzk@kernel.org

clk: samsung: Remove support for Exynos5440

2018-07-24T16:43:52Z

The Exynos5440 is not actively developed, there are no development boards available and probably there are no real products with it. Remove wide-tree support for Exynos5440. Signed-off-by: Krzysztof Kozlowski Acked-by: Chanwoo Choi Acked-by: Stephen Boyd Acked-by: Sylwester Nawrocki

clk: samsung: exynos5250: Move PD-dependent clocks to Exynos5 sub-CMU

2018-03-06T16:39:40Z

Clocks related to DISP1 block require special handling for power domain turn on/off sequences. Till now this was handled by Exynos power domain driver, but that approach was limited only to some special cases. This patch moves handling of those operations to clock controller driver. This gives more flexibility and allows fine tune values of some clock-specific registers. This patch moves handling of those mentioned clocks to Exynos5 sub-CMU driver instantiated from Exynos5250 driver. Signed-off-by: Marek Szyprowski Acked-by: Krzysztof Kozlowski Signed-off-by: Sylwester Nawrocki