linux-dev/drivers/clk/ti/clk.c, branch linus/master

clk: ti: Add ti_dt_clk_name() helper to use clock-output-names

2022-03-11T02:55:59Z

Let's create the clock alias based on the clock-output-names property if available. Also the component clock drivers can use ti_dt_clk_name() in the following patches. Signed-off-by: Tony Lindgren Link: https://lore.kernel.org/r/20220204071449.16762-7-tony@atomide.com Signed-off-by: Stephen Boyd

clk: ti: Add ti_find_clock_provider() to use clock-output-names

2022-03-11T02:55:59Z

Let's add ti_find_clock_provider() so we can use clock-output-names to name the clock provider instead of relying on non-standard devicetree node names. Signed-off-by: Tony Lindgren Link: https://lore.kernel.org/r/20220204071449.16762-5-tony@atomide.com Signed-off-by: Stephen Boyd

clk: ti: Optionally parse IO address from parent clock node

2022-03-11T02:55:59Z

If no reg property is specified for a TI clock, let's try to use the parent clock node IO address. This way we can avoid duplicate devicetree reg properties that cause warnings for unique_unit_address. Signed-off-by: Tony Lindgren Link: https://lore.kernel.org/r/20220204071449.16762-4-tony@atomide.com Signed-off-by: Stephen Boyd

clk: ti: Preserve node in ti_dt_clocks_register()

2022-03-11T02:55:59Z

In preparation for making use of the clock-output-names, we want to keep node around in ti_dt_clocks_register(). This change should not needed as a fix currently. Signed-off-by: Tony Lindgren Link: https://lore.kernel.org/r/20220204071449.16762-3-tony@atomide.com Signed-off-by: Stephen Boyd

clk: ti: clkctrl: Fix hidden dependency to node name

2020-01-20T10:29:27Z

We currently have a hidden dependency to the device tree node name for the clkctrl clocks. Instead of using standard node name like "clock", we must use "l4-per-clkctrl" type naming so the clock driver can find the associated clock domain. Further, if "clk" is specified for a clock node name, the driver sets TI_CLK_CLKCTRL_COMPAT flag that uses different logic for the clock name based on the parent node name for the all the clkctrl clocks for the SoC. If the clock node naming dependency is not understood, the related clockdomain is not found, or a wrong one can get used if a clock manager has multiple clock domains. As each clkctrl instance represents a single clock domain, let's allow using domain specific compatible names to specify the clock domain. This simplifies things and removes the hidden dependency to the node name. And then later on, after the node names have been standardized, we can drop the related code for parsing the node names. Let's also update the binding to use standard "clock" node naming instead of "clk" and add the missing description for reg. Cc: devicetree@vger.kernel.org Cc: Rob Herring Signed-off-by: Tony Lindgren Acked-by: Rob Herring Acked-by: Stephen Boyd Signed-off-by: Tero Kristo

clk: Remove io.h from clk-provider.h

2019-05-15T20:21:37Z

Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\<__io_virt\>' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\<__ioremap\>' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' --or \ -e '\' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven Cc: Chen-Yu Tsai Acked-by: Maxime Ripard Acked-by: Tero Kristo Acked-by: Sekhar Nori Cc: Krzysztof Kozlowski Acked-by: Mark Brown Cc: Chris Zankel Acked-by: Max Filippov Acked-by: John Crispin Acked-by: Heiko Stuebner Signed-off-by: Stephen Boyd

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2019-03-14T15:46:17Z

Pull clk subsystem updates from Stephen Boyd: "We have a fairly balanced mix of clk driver updates and clk framework updates this time around. It's the usual pile of new drivers for new hardware out there and the normal small fixes and updates, but then we have some core framework changes too. In the core framework, we introduce support for a clk_get_optional() API to get clks that may not always be populated and a way to devm manage clkdev lookups registered by provider drivers. We also do some refactoring to simplify the interface between clkdev and the common clk framework so we can reuse the DT parsing and clk_get() path in provider drivers in the future. This work will continue in the next few cycles while we convert how providers specify clk parents. On the driver side, the biggest part of the dirstat is the Amlogic clk driver that got support for the G12A SoC. It dominates with almost half the overall diff, while the second largest part of the diff is in the i.MX clk driver that gained support for imx8mm SoCs. After that, we have the Actions Semiconductor and Qualcomm drivers rounding out the big part of the dirstat because they both got new hardware support for SoCs. The rest is just various updates and non-critical fixes for existing drivers. Core: - Convert a few clk bindings to JSON schema format - Add a {devm_}clk_get_optional() API - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups - Start rewriting clk parent registration and supporting device links by moving around code that supports clk_get() and DT parsing of the 'clocks' property New Drivers: - Add Qualcomm MSM8998 RPM managed clks - IPA clk support on Qualcomm RPMh clk controllers - Actions Semi S500 SoC clk support - Support for fixed rate clks populated from an MMIO register - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H - Add TMU (timer) clocks on Renesas RZ/G2E - Add Amlogic G12A Always-On Clock Controller - Add 32k clock generation for Amlogic AXG - Add support for the Mali GPU clocks on Amlogic Meson8 - Add Amlogic G12A EE clock controller driver - Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E - Add i.MX8MM SoC clk driver support Removed Drivers: - Remove clps711x driver as the board support is gone Updates: - 3rd ECO fix for Mediatek MT2712 SoCs - Updates for Qualcomm MSM8998 GCC clks - Random static analysis fixes for clk drivers - Support for sleeping gpios in the clk-gpio type - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.) - Split LCDC into two clks on the Marvell MMP2 SoC - Various DT of_node refcount fixes - Get rid of CLK_IS_BASIC from TI code (yay!) - TI Autoidle clk support - Fix Amlogic Meson8 APB clock ID name - Claim input clocks through DT for Amlogic AXG and GXBB - Correct the DU (display unit) parent clock on Renesas RZ/G2E - Exynos5433 IMEM CMU crypto clk support (SlimSS) - Fix for the PLL-MIPI on the Allwinner A23 - Fix Rockchip rk3328 PLL rate calculation - Add SET_RATE_PARENT flag on display clk of Rockhip rk3066 - i.MX SCU clk driver clk_set_parent() and cpufreq support" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits) dt-bindings: clock: imx8mq: Fix numbering overlaps and gaps clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT clk: fixup default index for of_clk_get_by_name() clk: Move of_clk_*() APIs into clk.c from clkdev.c clk: Inform the core about consumer devices clk: Introduce of_clk_get_hw_from_clkspec() clk: core: clarify the check for runtime PM clk: Combine __clk_get() and __clk_create_clk() clk: imx8mq: add GPIO clocks to clock tree clk: mediatek: correct cpu clock name for MT8173 SoC clk: imx: Refactor entire sccg pll clk clk: imx: scu: add cpu frequency scaling support clk: mediatek: Mark bus and DRAM related clocks as critical clk: mediatek: Add flags to mtk_gate clk: mediatek: Add MUX_FLAGS macro clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks clk: ingenic: Remove set but not used variable 'enable' clk: at91: programmable: remove unneeded register read clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel clk: mediatek: add MUX_GATE_FLAGS_2 ...

treewide: add checks for the return value of memblock_alloc*()

2019-03-12T17:04:02Z

Add check for the return value of memblock_alloc*() functions and call panic() in case of error. The panic message repeats the one used by panicing memblock allocators with adjustment of parameters to include only relevant ones. The replacement was mostly automated with semantic patches like the one below with manual massaging of format strings. @@ expression ptr, size, align; @@ ptr = memblock_alloc(size, align); + if (!ptr) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align); [anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type] Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org [rppt@linux.ibm.com: fix format strings for panics after memblock_alloc] Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com [rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails] Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx [akpm@linux-foundation.org: fix xtensa printk warning] Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport Signed-off-by: Anders Roxell Reviewed-by: Guo Ren [c-sky] Acked-by: Paul Burton [MIPS] Acked-by: Heiko Carstens [s390] Reviewed-by: Juergen Gross [Xen] Reviewed-by: Geert Uytterhoeven [m68k] Acked-by: Max Filippov [xtensa] Cc: Catalin Marinas Cc: Christophe Leroy Cc: Christoph Hellwig Cc: "David S. Miller" Cc: Dennis Zhou Cc: Greentime Hu Cc: Greg Kroah-Hartman Cc: Guan Xuetao Cc: Guo Ren Cc: Mark Salter Cc: Matt Turner Cc: Michael Ellerman Cc: Michal Simek Cc: Petr Mladek Cc: Richard Weinberger Cc: Rich Felker Cc: Rob Herring Cc: Rob Herring Cc: Russell King Cc: Stafford Horne Cc: Tony Luck Cc: Vineet Gupta Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branches 'clk-imx', 'clk-samsung', 'clk-ti', 'clk-uniphier-gear' and 'clk-mmp2-lcdc' into clk-next

2019-03-08T18:27:40Z

- Split LCDC into two clks on the Marvell MMP2 SoC * clk-imx: clk: imx8mq: add GPIO clocks to clock tree clk: imx: Refactor entire sccg pll clk clk: imx: scu: add cpu frequency scaling support clk: imx: imx8mm: Mark init function __init clk: imx8mq: Add the missing ARM clock dt-bindings: imx8mq-clock: Add the missing ARM clock clk: imx: imx8mq: Fix the rate propagation for arm pll clk: imx8mq: Add support for the CLKO1 clock clk: imx8mq: Fix the CLKO2 source select list clk: imx8mq: Add missing M4 clocks clk: imx: Add clock driver support for imx8mm dt-bindings: imx: Add clock binding doc for imx8mm clk: imx: Add PLLs driver for imx8mm soc clk: imx5: add imx5_SCC2_IPG_GATE clk: imx: scu: add set parent support clk: imx: scu: add fallback compatible string support clk: imx8mq: Make parent names arrays const pointers clk: imx: Make parents const pointer in mux wrappers clk: imx: Make parent_names const pointer in composite-8m * clk-samsung: clk: samsung: s3c2443: Mark expected switch fall-through clk: samsung: exynos5: Fix kfree() of const memory on setting driver_override clk: samsung: exynos5: Fix possible NULL pointer exception on platform_device_alloc() failure clk: samsung: exynos5433: Add selected IMEM clocks clk: samsung: dt-bindings: Document Exynos5433 IMEM CMU clk: samsung: exynos5433: Fix name typo in sssx clk: samsung: exynos5433: Fix definition of CLK_ACLK_IMEM_{200, 266} clocks clk: samsung: dt-bindings: Add Exynos5433 IMEM CMU clock IDs * clk-ti: clk: clk-twl6040: Fix imprecise external abort for pdmclk ARM: OMAP2+: hwmod: disable ick autoidling when a hwmod requires that clk: ti: check clock type before doing autoidle ops clk: ti: add a usecount for autoidle clk: ti: generalize the init sequence of clk_hw_omap clocks clk: ti: remove usage of CLK_IS_BASIC clk: ti: add new API for checking if a provided clock is an OMAP clock clk: ti: move clk_hw_omap list handling under generic part of the driver * clk-uniphier-gear: clk: uniphier: Fix update register for CPU-gear * clk-mmp2-lcdc: clk: mmp2: separate LCDC peripheral clk form the display clock dt-bindings: marvell,mmp2: Add clock id for the LCDC clock

clk: ti: generalize the init sequence of clk_hw_omap clocks

2019-02-15T14:46:22Z

Add a generic API for initializing clocks of clk_hw_omap type clocks, and convert the whole TI clock driver suite to use this for registering the clocks. Also, get rid of the now redundant API for adding the clocks to the OMAP HW clocks list; instead this is used directly from the register API. Signed-off-by: Tero Kristo Acked-by: Tony Lindgren Tested-by: Keerthy