linux-dev/drivers/clk/ti/dpll.c, branch linus/master

clk: ti: Update pll and clockdomain clocks to use ti_dt_clk_name()

2022-03-11T02:55:59Z

Let's update the TI pll and clockdomain clocks to use ti_dt_clk_name() instead of devicetree node name if available. Signed-off-by: Tony Lindgren Link: https://lore.kernel.org/r/20220204071449.16762-8-tony@atomide.com Signed-off-by: Stephen Boyd

clk: ti: add am33xx/am43xx spread spectrum clock support

2021-06-09T00:49:16Z

The patch enables spread spectrum clocking (SSC) for MPU and LCD PLLs. As reported by the TI spruh73x/spruhl7x RM, SSC is only supported for the DISP/LCD and MPU PLLs on am33xx/am43xx. SSC is not supported for DDR, PER, and CORE PLLs. Calculating the required values and setting the registers accordingly was taken from the set_mpu_spreadspectrum routine contained in the arch/arm/mach-omap2/am33xx/clock_am33xx.c file of the u-boot project. In locked condition, DPLL output clock = CLKINP *[M/N]. In case of SSC enabled, the reference manual explains that there is a restriction of range of M values. Since the omap2_dpll_round_rate routine attempts to select the minimum possible N, the value of M obtained is not guaranteed to be within the range required. With the new "ti,min-div" parameter it is possible to increase N and consequently M to satisfy the constraint imposed by SSC. Signed-off-by: Dario Binacchi Reviewed-by: Tero Kristo Link: https://lore.kernel.org/r/20210606202253.31649-6-dariobin@libero.it Signed-off-by: Stephen Boyd

clk: ti: dpll: Fix misnaming of '_register_dpll()'s 'user' parameter

2021-02-11T19:56:07Z

Fixes the following W=1 kernel build warning(s): drivers/clk/ti/dpll.c:163: warning: Function parameter or member 'user' not described in '_register_dpll' drivers/clk/ti/dpll.c:163: warning: Excess function parameter 'hw' description in '_register_dpll' Cc: Tero Kristo Cc: Michael Turquette Cc: Stephen Boyd Cc: linux-omap@vger.kernel.org Cc: linux-clk@vger.kernel.org Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20210120093040.1719407-16-lee.jones@linaro.org Reviewed-by: Tero Kristo Signed-off-by: Stephen Boyd

Merge branches 'clk-renesas', 'clk-rockchip', 'clk-const' and 'clk-simplify' into clk-next

2019-09-19T22:31:41Z

* clk-renesas: clk: renesas: cpg-mssr: Set GENPD_FLAG_ALWAYS_ON for clock domain clk: renesas: r9a06g032: Set GENPD_FLAG_ALWAYS_ON for clock domain clk: renesas: mstp: Set GENPD_FLAG_ALWAYS_ON for clock domain dt-bindings: clk: emev2: Rename bindings documentation file clk: renesas: rcar-usb2-clock-sel: Use devm_platform_ioremap_resource() helper * clk-rockchip: clk: rockchip: Add clock controller for the rk3308 clk: rockchip: Add dt-binding header for rk3308 dt-bindings: Add bindings for rk3308 clock controller clk: rockchip: Fix -Wunused-const-variable in rv1108 clk driver * clk-const: clk: spear: Make structure i2s_sclk_masks constant * clk-simplify: clk/ti: Use kmemdup rather than duplicating its implementation clk: fix devm_platform_ioremap_resource.cocci warnings

clk/ti: Use kmemdup rather than duplicating its implementation

2019-09-06T21:20:15Z

kmemdup is introduced to duplicate a region of memory in a neat way. Rather than kmalloc/kzalloc + memcpy, which the programmer needs to write the size twice (sometimes lead to mistakes), kmemdup improves readability, leads to smaller code and also reduce the chances of mistakes. Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy. Signed-off-by: Fuqian Huang Link: https://lkml.kernel.org/r/20190703162700.32091-1-huangfq.daxian@gmail.com Signed-off-by: Stephen Boyd

clk: ti: Don't reference clk_init_data after registration

2019-08-16T17:22:46Z

A future patch is going to change semantics of clk_register() so that clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid referencing this member here so that we don't run into NULL pointer exceptions. Cc: Tero Kristo Cc: Tony Lindgren Reported-by: "kernelci.org bot" Signed-off-by: Stephen Boyd Link: https://lkml.kernel.org/r/20190815221249.53235-1-sboyd@kernel.org

clk: ti: generalize the init sequence of clk_hw_omap clocks

2019-02-15T14:46:22Z

Add a generic API for initializing clocks of clk_hw_omap type clocks, and convert the whole TI clock driver suite to use this for registering the clocks. Also, get rid of the now redundant API for adding the clocks to the OMAP HW clocks list; instead this is used directly from the register API. Signed-off-by: Tero Kristo Acked-by: Tony Lindgren Tested-by: Keerthy

clk: Use of_node_name_eq for node name comparisons

2018-12-14T21:52:41Z

Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. For instances using of_node_cmp, this has the side effect of now using case sensitive comparisons. This should not matter for any FDT based system which all of these are. Cc: Geert Uytterhoeven Cc: Michael Turquette Cc: Stephen Boyd Cc: Tero Kristo Cc: Ulf Hansson Cc: linux-renesas-soc@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring Reviewed-by: Geert Uytterhoeven Acked-by: Geert Uytterhoeven (clk-mstp) Acked-by: Ulf Hansson (ux500) Signed-off-by: Stephen Boyd

Merge branch 'clk-ti' into clk-next

2018-10-18T22:41:21Z

* clk-ti: clk: ti: Prepare for remove of OF node name clk: Clean up suspend/resume coding style clk: ti: Add functions to save/restore clk context clk: clk: Add clk_gate_restore_context function clk: Add functions to save/restore clock context en-masse clk: ti: dra7: add new clkctrl data clk: ti: dra7xx: rename existing clkctrl data as compat data clk: ti: am43xx: add new clkctrl data for am43xx clk: ti: am43xx: rename existing clkctrl data as compat data clk: ti: am33xx: add new clkctrl data for am33xx clk: ti: am33xx: rename existing clkctrl data as compat data clk: ti: clkctrl: replace dashes from clkdm name with underscore clk: ti: clkctrl: support multiple clkctrl nodes under a cm node dt-bindings: clock: dra7xx: add clkctrl indices for new data layout dt-bindings: clock: am43xx: add clkctrl indices for new data layout dt-bindings: clock: am33xx: add clkctrl indices for new data layout

clk: ti: Add functions to save/restore clk context

2018-10-03T12:29:19Z

SoCs like AM43XX lose clock registers context during RTC-only suspend. Hence add functions to save/restore the clock registers context. Signed-off-by: Keerthy Signed-off-by: Russ Dill Acked-by: Tony Lindgren Signed-off-by: Tero Kristo