linux-dev/drivers/comedi, branch master

comedi: convert sysfs snprintf to sysfs_emit

2022-09-09T08:37:52Z

Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: Xuezhi Zhang Link: https://lore.kernel.org/r/20220901013423.418464-1-zhangxuezhi3@gmail.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2022-08-05T02:30:35Z

Pull pci updates from Bjorn Helgaas: "Enumeration: - Consolidate duplicated 'next function' scanning and extend to allow 'isolated functions' on s390, similar to existing hypervisors (Niklas Schnelle) Resource management: - Implement pci_iobar_pfn() for sparc, which allows us to remove the sparc-specific pci_mmap_page_range() and pci_mmap_resource_range(). This removes the ability to map the entire PCI I/O space using /proc/bus/pci, but we believe that's already been broken since v2.6.28 (Arnd Bergmann) - Move common PCI definitions to asm-generic/pci.h and rework others to be be more specific and more encapsulated in arches that need them (Stafford Horne) Power management: - Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas) Virtualization: - Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate the functions but don't advertise an ACS capability (Pavan Chebbi) Error handling: - Clear PCI Status register during enumeration in case firmware left errors logged (Kai-Heng Feng) - When we have native control of AER, enable error reporting for all devices that support AER. Previously only a few drivers enabled this (Stefan Roese) - Keep AER error reporting enabled for switches. Previously we enabled this during enumeration but immediately disabled it (Stefan Roese) - Iterate over error counters instead of error strings to avoid printing junk in AER sysfs counters (Mohamed Khalfella) ASPM: - Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g., via sysfs, are not lost across power state changes (Kai-Heng Feng) Endpoint framework: - Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie) Endpoint embedded DMA controller driver: - Simplify and clean up support for the DesignWare embedded DMA (eDMA) controller (Frank Li, Serge Semin) Broadcom STB PCIe controller driver: - Avoid config space accesses when link is down because we can't recover from the CPU aborts these cause (Jim Quinlan) - Look for power regulators described under Root Ports in DT and enable them before scanning the secondary bus (Jim Quinlan) - Disable/enable regulators in suspend/resume (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Simplify and clean up clock and PHY management (Richard Zhu) - Disable/enable regulators in suspend/resume (Richard Zhu) - Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu) - Allow speeds faster than Gen2 (Richard Zhu) - Make link being down a non-fatal error so controller probe doesn't fail if there are no Endpoints connected (Richard Zhu) Loongson PCIe controller driver: - Add ACPI and MCFG support for Loongson LS7A (Huacai Chen) - Avoid config reads to non-existent LS2K/LS7A devices because a hardware defect causes machine hangs (Huacai Chen) - Work around LS7A integrated devices that report incorrect Interrupt Pin values (Jianmin Lv) Marvell Aardvark PCIe controller driver: - Add support for AER and Slot capability on emulated bridge (Pali Rohár) MediaTek PCIe controller driver: - Add Airoha EN7532 to DT binding (John Crispin) - Allow building of driver for ARCH_AIROHA (Felix Fietkau) MediaTek PCIe Gen3 controller driver: - Print decoded LTSSM state when the link doesn't come up (Jianjun Wang) NVIDIA Tegra194 PCIe controller driver: - Convert DT binding to json-schema (Vidya Sagar) - Add DT bindings and driver support for Tegra234 Root Port and Endpoint mode (Vidya Sagar) - Fix some Root Port interrupt handling issues (Vidya Sagar) - Set default Max Payload Size to 256 bytes (Vidya Sagar) - Fix Data Link Feature capability programming (Vidya Sagar) - Extend Endpoint mode support to devices beyond Controller-5 (Vidya Sagar) Qualcomm PCIe controller driver: - Rework clock, reset, PHY power-on ordering to avoid hangs and improve consistency (Robert Marko, Christian Marangi) - Move pipe_clk handling to PHY drivers (Dmitry Baryshkov) - Add IPQ60xx support (Selvam Sathappan Periakaruppan) - Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru) - Add support for more than 32 MSI interrupts (Dmitry Baryshkov) Renesas R-Car PCIe controller driver: - Convert DT binding to json-schema (Herve Codina) - Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver (Herve Codina) Samsung Exynos PCIe controller driver: - Fix phy-exynos-pcie driver so it follows the 'phy_init() before phy_power_on()' PHY programming model (Marek Szyprowski) Synopsys DesignWare PCIe controller driver: - Simplify and clean up the DWC core extensively (Serge Semin) - Fix an issue with programming the ATU for regions that cross a 4GB boundary (Serge Semin) - Enable the CDM check if 'snps,enable-cdm-check' exists; previously we skipped it if 'num-lanes' was absent (Serge Semin) - Allocate a 32-bit DMA-able page to be MSI target instead of using a driver data structure that may not be addressable with 32-bit address (Will McVicker) - Add DWC core support for more than 32 MSI interrupts (Dmitry Baryshkov) Xilinx Versal CPM PCIe controller driver: - Add DT binding and driver support for Versal CPM5 Gen5 Root Port (Bharat Kumar Gogada)" * tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits) PCI: imx6: Support more than Gen2 speed link mode PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers PCI: imx6: Reformat suspend callback to keep symmetric with resume PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier PCI: imx6: Disable clocks in reverse order of enable PCI: imx6: Do not hide PHY driver callbacks and refine the error handling PCI: imx6: Reduce resume time by only starting link if it was up before suspend PCI: imx6: Mark the link down as non-fatal error PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset() PCI: imx6: Turn off regulator when system is in suspend mode PCI: imx6: Call host init function directly in resume PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks PCI: imx6: Propagate .host_init() errors to caller PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() PCI: imx6: Factor out ref clock disable to match enable PCI: imx6: Move imx6_pcie_clk_disable() earlier PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier PCI: imx6: Move PHY management functions together PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS() ...

PCI: Move isa_dma_bridge_buggy out of asm/dma.h

2022-07-22T22:24:47Z

The isa_dma_bridge_buggy symbol is only used for x86_32, and only x86_32 platforms or quirks ever set it. Add a new linux/isa-dma.h header that #defines isa_dma_bridge_buggy to 0 except on x86_32, where we keep it as a variable, and remove all the arch- specific definitions. [bhelgaas: commit log] Suggested-by: Arnd Bergmann Suggested-by: Christoph Hellwig Link: https://lore.kernel.org/r/20220722214944.831438-3-shorne@gmail.com Signed-off-by: Stafford Horne Signed-off-by: Bjorn Helgaas Reviewed-by: Christoph Hellwig Acked-by: Geert Uytterhoeven

comedi: vmk80xx: fix expression for tx buffer size

2022-06-10T13:21:23Z

The expression for setting the size of the allocated bulk TX buffer (`devpriv->usb_tx_buf`) is calling `usb_endpoint_maxp(devpriv->ep_rx)`, which is using the wrong endpoint (should be `devpriv->ep_tx`). Fix it. Fixes: a23461c47482 ("comedi: vmk80xx: fix transfer-buffer overflow") Cc: Johan Hovold Cc: stable@vger.kernel.org # 4.9+ Reviewed-by: Johan Hovold Signed-off-by: Ian Abbott Link: https://lore.kernel.org/r/20220607171819.4121-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman

drivers: comedi: replace ternary operator with min()

2022-05-19T16:54:45Z

Fix the following coccicheck warning: drivers/comedi/drivers.c:857:12-13: WARNING opportunity for min(). min() macro is defined in include/linux/minmax.h. It avoids multiple evaluations of the arguments when non-constant and performs strict type-checking. Reviewed-by: Ian Abbott Signed-off-by: Guo Zhengkui Link: https://lore.kernel.org/r/20220513071608.49047-1-guozhengkui@vivo.com Signed-off-by: Greg Kroah-Hartman

comedi: drivers: ni_routes: Use strcmp() instead of memcmp()

2022-02-25T11:08:52Z

The family and device comparisons were using memcmp(), but this could lead to Out-of-bounds reads when the length was larger than the buffers being compared. Since these appear to always be NUL-terminated strings, just use strcmp() instead. This was found with Clang under LTO: [ 92.405851][ T1] kernel BUG at lib/string_helpers.c:980! ... [ 92.409141][ T1] RIP: 0010:fortify_panic (fbdev.c:?) ... [ 92.410056][ T1] ni_assign_device_routes (fbdev.c:?) [ 92.410056][ T1] ? unittest_enter (fbdev.c:?) [ 92.410056][ T1] ni_routes_unittest (ni_routes_test.c:?) [ 92.410056][ T1] ? unittest_enter (fbdev.c:?) [ 92.410056][ T1] __initstub__kmod_ni_routes_test__505_604_ni_routes_unittest6 (fbdev.c:?) [ 92.410056][ T1] do_one_initcall (fbdev.c:?) Link: https://lore.kernel.org/lkml/20220210072821.GD4074@xsang-OptiPlex-9020 Fixes: 4bb90c87abbe ("staging: comedi: add interface to ni routing table information") Cc: Ian Abbott Cc: H Hartley Sweeten Cc: Spencer E. Olson Cc: Greg Kroah-Hartman Cc: Masahiro Yamada Cc: Lee Jones Reported-by: kernel test robot Reviewed-by: Ian Abbott Signed-off-by: Kees Cook Link: https://lore.kernel.org/r/20220215171017.1247291-1-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman

comedi: remove redundant assignment to variable buffer_config

2022-02-08T11:12:02Z

Variable buffer_config is being assigned a value that is never read, it is being re-assigned later on. The assignment is redundant and can be removed. Signed-off-by: Colin Ian King Link: https://lore.kernel.org/r/20220130232910.9313-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman

comedi: das16: Use struct_size() helper in comedi_alloc_spriv()

2022-01-26T13:16:16Z

Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Also, address the following sparse warnings: drivers/comedi/drivers/das16.c:964:45: warning: using sizeof on a flexible structure drivers/comedi/drivers/das16.c:998:45: warning: using sizeof on a flexible structure Link: https://github.com/KSPP/linux/issues/174 Reviewed-by: Ian Abbott Signed-off-by: Gustavo A. R. Silva Link: https://lore.kernel.org/r/20220125232525.GA80228@embeddedor Signed-off-by: Greg Kroah-Hartman

comedi: Move "comedi_isadma.h" to

2021-11-26T15:48:59Z

Some of the header files in "drivers/comedi/drivers/" are common enough to be useful to out-of-tree comedi driver modules. Using them for out-of-tree module builds is hampered by the headers being outside the "include/" directory so it is desirable to move them. There are about a half a dozen or so Comedi device drivers that use the "comedi_isadma" module to add ISA DMA support. The macros and declarations to use that module are in the "comedi_isadma.h" header file in the comedi "drivers" directory. Move it into "include/linux/comedi/". Signed-off-by: Ian Abbott Link: https://lore.kernel.org/r/20211117120604.117740-6-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman

comedi: Move "comedi_8254.h" to

2021-11-26T15:48:59Z

Some of the header files in "drivers/comedi/drivers/" are common enough to be useful to out-of-tree comedi driver modules. Using them for out-of-tree module builds is hampered by the headers being outside the "include/" directory so it is desirable to move them. There are about a couple of dozen or so Comedi device drivers that use the "comedi_8254" module to add timers based on the venerable 8254 Programmable Interval Timer chip. The macros and declarations to use that module are in the "comedi_8254.h" header file in the comedi "drivers" directory. Move it into "include/linux/comedi/". Signed-off-by: Ian Abbott Link: https://lore.kernel.org/r/20211117120604.117740-5-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman