linux-dev/drivers/crypto/cavium/nitrox, branch master

crypto: cavium/nitrox - remove check of list iterator against head past the loop body

2022-04-08T08:26:43Z

When list_for_each_entry() completes the iteration over the whole list without breaking the loop, the iterator value will be a bogus pointer computed based on the head element. While it is safe to use the pointer to determine if it was computed based on the head element, either with list_entry_is_head() or &pos->member == head, using the iterator variable after the loop should be avoided. In preparation to limit the scope of a list iterator to the list traversal loop, use a dedicated pointer to point to the found element [1]. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Signed-off-by: Jakob Koschel Signed-off-by: Herbert Xu

crypto: cavium/nitrox - don't cast parameter in bit operations

2022-03-02T22:49:21Z

While in this particular case it would not be a (critical) issue, the pattern itself is bad and error prone in case the location of the parameter is changed. Don't cast parameter to unsigned long pointer in the bit operations. Instead copy to a local variable on stack of a proper type and use. Fixes: cf718eaa8f9b ("crypto: cavium/nitrox - Enabled Mailbox support") Signed-off-by: Andy Shevchenko Signed-off-by: Herbert Xu

crypto: cavium/nitrox - fix typo on crypto

2022-02-18T05:21:08Z

crypto had a typo, fix it. Signed-off-by: Corentin Labbe Signed-off-by: Herbert Xu

PCI: Change the type of probe argument in reset functions

2021-08-18T22:32:42Z

Change the type of probe argument in functions which implement reset methods from int to bool to make the context and intent clear. Suggested-by: Alex Williamson Link: https://lore.kernel.org/r/20210817180500.1253-10-ameynarkhede03@gmail.com Signed-off-by: Amey Narkhede Signed-off-by: Bjorn Helgaas

PCI: Add pcie_reset_flr() with 'probe' argument

2021-08-17T20:23:13Z

Most reset methods are of the form "pci_*_reset(dev, probe)". pcie_flr() was an exception because it relied on a separate pcie_has_flr() function instead of taking a "probe" argument. Add "pcie_reset_flr(dev, probe)" to follow the convention. Remove pcie_has_flr(). Some pcie_flr() callers that did not use pcie_has_flr() remain. [bhelgaas: commit log, rework pcie_reset_flr() to use dev->devcap directly] Link: https://lore.kernel.org/r/20210817180500.1253-3-ameynarkhede03@gmail.com Signed-off-by: Amey Narkhede Signed-off-by: Bjorn Helgaas Reviewed-by: Raphael Norwitz

crypto: cavium/nitrox - Fix an error rhandling path in 'nitrox_probe()'

2021-06-11T07:08:06Z

If an error occurs after a successful 'ioremap()' call, it must be undone by a corresponding 'iounmap()' call, as already done in the remove function. Add a 'pf_sw_fail' label in the error handling path and add the missing 'iounmap()'. While at it, also add a 'flr_fail' label in the error handling path and use it to avoid some code duplication. Fixes: 14fa93cdcd9b ("crypto: cavium - Add support for CNN55XX adapters.") Signed-off-by: Christophe JAILLET Signed-off-by: Herbert Xu

crypto: nitrox - fix unchecked variable in nitrox_register_interrupts

2021-06-11T07:02:14Z

Function nitrox_register_interrupts leaves variable 'nr_vecs' unchecked, which would be use as kcalloc parameter later. Fixes: 5155e118dda9 ("crypto: cavium/nitrox - use pci_alloc_irq_vectors() while enabling MSI-X.") Signed-off-by: Tong Tiangen Signed-off-by: Herbert Xu

crypto: cavium: Fix a bunch of kernel-doc related issues

2021-05-28T07:11:44Z

Fixes the following W=1 kernel build warning(s): drivers/crypto/cavium/nitrox/nitrox_main.c:41: warning: cannot understand function prototype: 'const struct pci_device_id nitrox_pci_tbl[] = ' drivers/crypto/cavium/nitrox/nitrox_main.c:73: warning: Function parameter or member 'ndev' not described in 'write_to_ucd_unit' drivers/crypto/cavium/nitrox/nitrox_main.c:73: warning: Function parameter or member 'ucode_size' not described in 'write_to_ucd_unit' drivers/crypto/cavium/nitrox/nitrox_main.c:73: warning: Function parameter or member 'ucode_data' not described in 'write_to_ucd_unit' drivers/crypto/cavium/nitrox/nitrox_main.c:73: warning: Function parameter or member 'block_num' not described in 'write_to_ucd_unit' drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:46: warning: Function parameter or member 'index' not described in 'incr_index' drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:46: warning: Function parameter or member 'count' not described in 'incr_index' drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:46: warning: Function parameter or member 'max' not described in 'incr_index' drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:46: warning: expecting prototype for Response codes from SE microcode(). Prototype was for incr_index() instead drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:287: warning: Function parameter or member 'cmdq' not described in 'post_se_instr' drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:381: warning: Function parameter or member 'callback' not described in 'nitrox_process_se_request' drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:381: warning: Function parameter or member 'cb_arg' not described in 'nitrox_process_se_request' drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:381: warning: expecting prototype for nitrox_se_request(). Prototype was for nitrox_process_se_request() instead drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:535: warning: Function parameter or member 'cmdq' not described in 'process_response_list' drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:535: warning: expecting prototype for process_request_list(). Prototype was for process_response_list() instead drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:584: warning: Function parameter or member 'data' not described in 'pkt_slc_resp_tasklet' drivers/crypto/cavium/nitrox/nitrox_mbx.c:14: warning: cannot understand function prototype: 'enum mbx_msg_type ' drivers/crypto/cavium/nitrox/nitrox_mbx.c:24: warning: cannot understand function prototype: 'enum mbx_msg_opcode ' drivers/crypto/cavium/nitrox/nitrox_skcipher.c:26: warning: cannot understand function prototype: 'const struct nitrox_cipher flexi_cipher_table[] = ' drivers/crypto/cavium/cpt/cptpf_main.c:411: warning: Function parameter or member 'cpt' not described in 'cpt_unload_microcode' drivers/crypto/cavium/cpt/cptpf_main.c:411: warning: expecting prototype for Ensure all cores are disengaged from all groups by(). Prototype was for cpt_unload_microcode() instead drivers/crypto/cavium/cpt/cptvf_reqmanager.c:17: warning: Function parameter or member 'q' not described in 'get_free_pending_entry' drivers/crypto/cavium/cpt/cptvf_reqmanager.c:17: warning: Function parameter or member 'qlen' not described in 'get_free_pending_entry' Cc: George Cherian Cc: Herbert Xu Cc: "David S. Miller" Cc: linux-crypto@vger.kernel.org Signed-off-by: Lee Jones Signed-off-by: Herbert Xu

crypto: cavium/nitrox - Fix kernel-doc

2021-05-14T11:07:58Z

Fix function name in nitrox_reqmgr.c kernel-doc comment to remove a warning. drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:382: warning: expecting prototype for nitrox_se_request(). Prototype was for nitrox_process_se_request() instead Reported-by: Abaci Robot Signed-off-by: Yang Li Signed-off-by: Herbert Xu

crypto: cavium/nitrox - Remove redundant initialization of 'sg'

2021-05-14T11:07:58Z

Pointer 'sg' is being initialized however this value is never read as 'sg' is assigned a same value in for_each_sg(). Remove the redundant assignment. Cleans up clang warning: drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:161:22: warning: Value stored to 'sg' during its initialization is never read [clang-analyzer-deadcode.DeadStores] Reported-by: Abaci Robot Signed-off-by: Yang Li Signed-off-by: Herbert Xu