linux-dev/drivers/firmware/Kconfig, branch master

Merge tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

2022-05-25T23:55:16Z

Pull sound updates from Takashi Iwai: "Not much dramatic changes at this time, but we've received quite a lot of changes for ASoC, while there are still a few fixes and quirks for usual HD- and USB-auido. Here are some highlights. ASoC: - Overhaul of endianness specification for data formats, avoiding needless restrictions due to CODECs - Initial stages of Intel AVS driver merge - Introduction of v4 IPC mechanism for SOF - TDM mode support for AK4613 - Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces, nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780 Others: - A few regression fixes after the USB-audio endpoint management refactoring - More enhancements for Cirrus HD-audio codec support (still ongoing) - Addition of generic serial MIDI driver" * tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (504 commits) ALSA: hda/realtek - Add new type for ALC245 ALSA: usb-audio: Configure sync endpoints before data ALSA: ctxfi: fix typo in comment ALSA: cs5535audio: fix typo in comment ALSA: ctxfi: Add SB046x PCI ID ALSA: usb-audio: Add missing ep_idx in fixed EP quirks ALSA: usb-audio: Workaround for clock setup on TEAC devices ALSA: lola: Bounds check loop iterator against streams array size ASoC: max98090: Move check for invalid values before casting in max98090_put_enab_tlv() ASoC: rt1308-sdw: add the default value of register 0xc320 ASoC: rt9120: Use pm_runtime and regcache to optimize 'pwdnn' logic ASoC: rt9120: Fix 3byte read, valule offset typo ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver. ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition() ASoC: codecs: lpass: Fix passing zero to 'PTR_ERR' ASoC: SOF: sof-client-ipc-flood-test: use pm_runtime_resume_and_get() ASoC: SOF: mediatek: remove duplicate include in mt8195.c ASoC: SOF: mediatek: Add mt8195 debug dump ASoC: SOF: mediatek: Add mediatek common debug dump ...

firmware: mediatek: Add adsp ipc protocol interface

2022-05-16T11:58:11Z

Some of mediatek processors contain the Tensilica HiFix DSP for audio processing. The communication between Host CPU and DSP firmware is taking place using a shared memory area for message passing. ADSP IPC protocol offers (send/recv) interfaces using mediatek-mailbox APIs. We use two mbox channels to implement a request-reply protocol. Signed-off-by: Allen-KH Cheng Signed-off-by: TingHan Shen Reviewed-by: Pierre-Louis Bossart Reviewed-by: Curtis Malainey Reviewed-by: Tzung-Bi Shih Reviewed-by: YC Hung Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20220512082215.3018-2-tinghan.shen@mediatek.com Signed-off-by: Mark Brown

Merge drm/drm-next into drm-misc-next

2022-04-05T09:06:58Z

Let's start the 5.19 development cycle. Signed-off-by: Maxime Ripard

sysfb: Enable boot time VESA graphic mode selection

2022-03-04T19:55:33Z

Since switch to simplefb/simpledrm VESA graphic mode selection with vga= kernel parameter is no longer available with legacy BIOS. The x86 realmode boot code enables the VESA graphic modes when option FB_BOOT_VESA_SUPPORT is enabled. This option is selected by vesafb but not simplefb/simpledrm. To enable use of VESA modes with simplefb in legacy BIOS boot mode drop dependency of BOOT_VESA_SUPPORT on FB, also drop the FB_ prefix. Select the option from sysfb rather than the drivers that depend on it. The BOOT_VESA_SUPPORT is not specific to framebuffer but rather to x86 platform, move it from fbdev to x86 Kconfig. Fixes: e3263ab389a7 ("x86: provide platform-devices for boot-framebuffers") Signed-off-by: Michal Suchanek Reviewed-by: Javier Martinez Canillas Acked-by: Borislav Petkov Signed-off-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/948c39940a4e99f5b43bdbcbe537faae71a43e1d.1645822213.git.msuchanek@suse.de

sysfb: Make config option dependencies explicit

2022-03-04T19:55:20Z

efifb and vesafb requires sysfb implicitly but this is not stated in Kconfig. Add the dependency. With that all drivers that require sysfb depend on it so it can default to disabled. Signed-off-by: Michal Suchanek Reviewed-by: Javier Martinez Canillas Signed-off-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/a0fa41e9186653e4c41ad0a28259e5cdc71b1f66.1645822213.git.msuchanek@suse.de

ACPI: APEI: explicit init of HEST and GHES in apci_init()

2022-03-03T19:24:22Z

From commit e147133a42cb ("ACPI / APEI: Make hest.c manage the estatus memory pool") was merged, ghes_init() relies on acpi_hest_init() to manage the estatus memory pool. On the other hand, ghes_init() relies on sdei_init() to detect the SDEI version and (un)register events. The dependencies are as follows: ghes_init() => acpi_hest_init() => acpi_bus_init() => acpi_init() ghes_init() => sdei_init() HEST is not PCI-specific and initcall ordering is implicit and not well-defined within a level. Based on above, remove acpi_hest_init() from acpi_pci_root_init() and convert ghes_init() and sdei_init() from initcalls to explicit calls in the following order: acpi_hest_init() ghes_init() sdei_init() Signed-off-by: Shuai Xue Signed-off-by: Rafael J. Wysocki

Merge tag 'v5.15-rc6' into asoc-5.16

2021-10-18T12:50:42Z

Linux 5.15-rc6

qcom_scm: hide Kconfig symbol

2021-10-07T14:51:57Z

Now that SCM can be a loadable module, we have to add another dependency to avoid link failures when ipa or adreno-gpu are built-in: aarch64-linux-ld: drivers/net/ipa/ipa_main.o: in function `ipa_probe': ipa_main.c:(.text+0xfc4): undefined reference to `qcom_scm_is_available' ld.lld: error: undefined symbol: qcom_scm_is_available >>> referenced by adreno_gpu.c >>> gpu/drm/msm/adreno/adreno_gpu.o:(adreno_zap_shader_load) in archive drivers/built-in.a This can happen when CONFIG_ARCH_QCOM is disabled and we don't select QCOM_MDT_LOADER, but some other module selects QCOM_SCM. Ideally we'd use a similar dependency here to what we have for QCOM_RPROC_COMMON, but that causes dependency loops from other things selecting QCOM_SCM. This appears to be an endless problem, so try something different this time: - CONFIG_QCOM_SCM becomes a hidden symbol that nothing 'depends on' but that is simply selected by all of its users - All the stubs in include/linux/qcom_scm.h can go away - arm-smccc.h needs to provide a stub for __arm_smccc_smc() to allow compile-testing QCOM_SCM on all architectures. - To avoid a circular dependency chain involving RESET_CONTROLLER and PINCTRL_SUNXI, drop the 'select RESET_CONTROLLER' statement. According to my testing this still builds fine, and the QCOM platform selects this symbol already. Acked-by: Kalle Valo Acked-by: Alex Elder Signed-off-by: Arnd Bergmann

firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs

2021-09-27T12:00:42Z

wm_adsp originally provided firmware loading on some audio DSP and was implemented as an ASoC codec driver. However, the firmware loading now covers a wider range of DSP cores and peripherals containing them, beyond just audio. So it needs to be available to non-audio drivers. All the core firmware loading support has been moved into a new driver cs_dsp, leaving only the ASoC-specific parts in wm_adsp. Signed-off-by: Simon Trimmer Signed-off-by: Charles Keepax Link: https://lore.kernel.org/r/20210913160057.103842-17-simont@opensource.cirrus.com Signed-off-by: Mark Brown

Merge tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2021-09-01T22:25:28Z

Pull ARM SoC driver updates from Arnd Bergmann: "These are updates for drivers that are tied to a particular SoC, including the correspondig device tree bindings: - A couple of reset controller changes for unisoc, uniphier, renesas and zte platforms - memory controller driver fixes for omap and tegra - Rockchip io domain driver updates - Lots of updates for qualcomm platforms, mostly touching their firmware and power management drivers - Tegra FUSE and firmware driver updateѕ - Support for virtio transports in the SCMI firmware framework - cleanup of ixp4xx drivers, towards enabling multiplatform support and bringing it up to date with modern platforms - Minor updates for keystone, mediatek, omap, renesas" * tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits) reset: simple: remove ZTE details in Kconfig help soc: rockchip: io-domain: Remove unneeded semicolon soc: rockchip: io-domain: add rk3568 support dt-bindings: power: add rk3568-pmu-io-domain support bus: ixp4xx: return on error in ixp4xx_exp_probe() soc: renesas: Prefer memcpy() over strcpy() firmware: tegra: Stop using seq_get_buf() soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 soc/tegra: fuse: Add runtime PM support soc/tegra: fuse: Clear fuse->clk on driver probe failure soc/tegra: pmc: Prevent racing with cpuilde driver soc/tegra: bpmp: Remove unused including dt-bindings: soc: ti: pruss: Add dma-coherent property soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs firmware: arm_scmi: Use WARN_ON() to check configured transports firmware: arm_scmi: Fix boolconv.cocci warnings soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing soc: mediatek: mmsys: add MT8365 support ...