linux-dev/drivers/gpu/drm/amd/display/Kconfig, branch master

drm/amdgpu/display: remove unneeded "default n" options

2022-09-13T18:32:58Z

Remove "default n" options. If the "default" line is removed, it defaults to 'n'. Signed-off-by: Jingyu Wang Signed-off-by: Alex Deucher

Merge tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm

2022-08-04T02:52:08Z

Pull drm updates from Dave Airlie: "Highlights: - New driver for logicvc - which is a display IP core. - EDID parser rework to add new extensions - fbcon scrolling improvements - i915 has some more DG2 work but not enabled by default, but should have enough features for userspace to work now. Otherwise it's lots of work all over the place. Detailed summary: New driver: - logicvc vfio: - use aperture API core: - of: Add data-lane helpers and convert drivers - connector: Remove deprecated ida_simple_get() media: - Add various RGB666 and RGB888 format constants panel: - Add HannStar HSD101PWW - Add ETML0700Y5DHA dma-buf: - add sync-file API - set dma mask for udmabuf devices fbcon: - Improve scrolling performance - Sanitize input fbdev: - device unregistering fixes - vesa: Support COMPILE_TEST - Disable firmware-device registration when first native driver loads aperture: - fix segfault during hot-unplug - export for use with other subsystems client: - use driver validated modes dp: - aux: make probing more reliable - mst: Read extended DPCD capabilities during system resume - Support waiting for HDP signal - Port-validation fixes edid: - CEA data-block iterators - struct drm_edid introduction - implement HF-EEODB extension gem: - don't use fb format non-existing planes probe-helper: - use 640x480 as displayport fallback scheduler: - don't kill jobs in interrupt context bridge: - Add support for i.MX8qxp and i.MX8qm - lots of fixes/cleanups - Add TI-DLPC3433 - fy07024di26a30d: Optional GPIO reset - ldb: Add reg and reg-name properties to bindings, Kconfig fixes - lt9611: Fix display sensing; - tc358767: DSI/DPI refactoring and DSI-to-eDP support, DSI lane handling - tc358775: Fix clock settings - ti-sn65dsi83: Allow GPIO to sleep - adv7511: I2C fixes - anx7625: Fix error handling; DPI fixes; Implement HDP timeout via callback - fsl-ldb: Drop DE flip - ti-sn65dsi86: Convert to atomic modesetting amdgpu: - use atomic fence helpers in DM - fix VRAM address calculations - export CRTC bpc via debugfs - Initial devcoredump support - Enable high priority gfx queue on asics which support it - Adjust GART size on newer APUs for S/G display - Soft reset for GFX 11 / SDMA 6 - Add gfxoff status query for vangogh - Fix timestamps for cursor only commits - Adjust GART size on newer APUs for S/G display - fix buddy memory corruption amdkfd: - MMU notifier fixes - P2P DMA support using dma-buf - Add available memory IOCTL - HMM profiler support - Simplify GPUVM validation - Unified memory for CWSR save/restore area i915: - General driver clean-up - DG2 enabling (still under force probe) - DG2 small BAR memory support - HuC loading support - DG2 workarounds - DG2/ATS-M device IDs added - Ponte Vecchio prep work and new blitter engines - add Meteorlake support - Fix sparse warnings - DMC MMIO range checks - Audio related fixes - Runtime PM fixes - PSR fixes - Media freq factor and per-gt enhancements - DSI fixes for ICL+ - Disable DMC flip queue handlers - ADL_P voltage swing updates - Use more the VBT for panel information - Fix on Type-C ports with TBT mode - Improve fastset and allow seamless M/N changes - Accept more fixed modes with VRR/DMRRS panels - Disable connector polling for a headless SKU - ADL-S display PLL w/a - Enable THP on Icelake and beyond - Fix i915_gem_object_ggtt_pin_ww regression on old platforms - Expose per tile media freq factor in sysfs - Fix dma_resv fence handling in multi-batch execbuf - Improve on suspend / resume time with VT-d enabled - export CRTC bpc settings via debugfs msm: - gpu: a619 support - gpu: Fix for unclocked GMU register access - gpu: Devcore dump enhancements - client utilization via fdinfo support - fix fence rollover issue - gem: Lockdep false-positive warning fix - gem: Switch to pfn mappings - WB support on sc7180 - dp: dropped custom bulk clock implementation - fix link retraining on resolution change - hdmi: dropped obsolete GPIO support tegra: - context isolation for host1x engines - tegra234 soc support mediatek: - add vdosys0/1 for mt8195 - add MT8195 dp_intf driver exynos: - Fix resume function issue of exynos decon driver by calling clk_disable_unprepare() properly if clk_prepare_enable() failed. nouveau: - set of misc fixes/cleanups - display cleanups gma500: - Cleanup connector I2C handling hyperv: - Unify VRAM allocation of Gen1 and Gen2 meson: - Support YUV422 output; Refcount fixes mgag200: - Support damage clipping - Support gamma handling - Protect concurrent HW access - Fixes to connector - Store model-specific limits in device-info structure - fix PCI register init panfrost: - Valhall support r128: - Fix bit-shift overflow rockchip: - Locking fixes in error path ssd130x: - Fix built-in linkage udl: - Always advertize VGA connector ast: - Support multiple outputs - fix black screen on resume sun4i: - HDMI PHY cleanups vc4: - Add support for BCM2711 vkms: - Allocate output buffer with vmalloc() mcde: - Fix ref-count leak mxsfb/lcdif: - Support i.MX8MP LCD controller stm/ltdc: - Support dynamic Z order - Support mirroring ingenic: - Fix display at maximum resolution" * tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm: (1480 commits) drm/amd/display: Fix a compilation failure on PowerPC caused by FPU code drm/amdgpu: enable support for psp 13.0.4 block drm/amdgpu: add files for PSP 13.0.4 drm/amdgpu: add header files for MP 13.0.4 drm/amdgpu: correct RLC_RLCS_BOOTLOAD_STATUS offset and index drm/amdgpu: send msg to IMU for the front-door loading drm/amdkfd: use time_is_before_jiffies(a + b) to replace "jiffies - a > b" drm/amdgpu: fix hive reference leak when reflecting psp topology info drm/amd/pm: enable GFX ULV feature support for SMU13.0.0 drm/amd/pm: update driver if header for SMU 13.0.0 drm/amdgpu: move mes self test after drm sched re-started drm/amdgpu: drop non-necessary call trace dump drm/amdgpu: enable VCN cg and JPEG cg/pg drm/amdgpu: vcn_4_0_2 video codec query drm/amdgpu: add VCN_4_0_2 firmware support drm/amdgpu: add VCN function in NBIO v7.7 drm/amdgpu: fix a vcn4 boot poll bug in emulation mode drm/amd/amdgpu: add memory training support for PSP_V13 drm/amdkfd: remove an unnecessary amdgpu_bo_ref drm/amd/pm: Add get_gfx_off_status interface for yellow carp ...

drm/amdgpu: Re-enable DCN for 64-bit powerpc

2022-07-25T22:25:38Z

Commit d11219ad53dc ("amdgpu: disable powerpc support for the newer display engine") disabled the DCN driver for all of powerpc due to unresolved build failures with some compilers. Further digging shows that the build failures only occur with compilers that default to 64-bit long double. Both the ppc64 and ppc64le ABIs define long double to be 128-bits, but there are compilers in the wild that default to 64-bits. The compilers provided by the major distros (Fedora, Ubuntu) default to 128-bits and are not affected by the build failure. There is a compiler flag to force 128-bit long double, which may be the correct long term fix, but as an interim fix only allow building the DCN driver if long double is 128-bits by default. The bisection in commit d11219ad53dc must have gone off the rails at some point, the build failure occurs all the way back to the original commit that enabled DCN support on powerpc, at least with some toolchains. Depends-on: d11219ad53dc ("amdgpu: disable powerpc support for the newer display engine") Fixes: 16a9dea110a6 ("amdgpu: Enable initial DCN support on POWER") Signed-off-by: Michael Ellerman Acked-by: Alex Deucher Reviewed-by: Dan Horák Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2100 Link: https://lore.kernel.org/r/20220725123918.1903255-1-mpe@ellerman.id.au

drm/amd/display: Enable building new display engine with KCOV enabled

2022-07-18T20:42:38Z

The new display engine uses floating point math, which is not supported by KCOV. Commit 9d1d02ff3678 ("drm/amd/display: Don't build DCN1 when kcov is enabled") tried to work around the problem by disabling CONFIG_DRM_AMD_DC_DCN if KCOV_INSTRUMENT_ALL and KCOV_ENABLE_COMPARISONS are enabled. The result is that KCOV can not be enabled on systems which require this display engine. A much simpler and less invasive solution is to disable KCOV selectively when compiling the display enagine while keeping it enabled for the rest of the kernel. Fixes: 9d1d02ff3678 ("drm/amd/display: Don't build DCN1 when kcov is enabled") Cc: Arnd Bergmann Cc: Leo Li Reviewed-by: Harry Wentland Signed-off-by: Guenter Roeck Signed-off-by: Alex Deucher

amdgpu: disable powerpc support for the newer display engine

2022-07-14T17:05:46Z

The DRM_AMD_DC_DCN display engine support (Raven, Navi, and newer) has not been building cleanly on powerpc and causes link errors due to mixing hard- and soft-float object files: powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o uses soft float powerpc64-linux-ld: failed to merge target specific data of file drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o [..] and while patches are floating around, it's not exactly obvious what is going on. The problem bisects to commit 41b7a347bf14 ("powerpc: Book3S 64-bit outline-only KASAN support") but that is probably more about changing config variables than the fundamental cause. Despite the bisection result, a more directly related commit seems to be 26f4712aedbd ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder"). It's probably a combination of the two. This has been going on since the merge window, without any final word. So instead of blindly applying patches that may or may not be the right thing, let's disable this for now. As Michael Ellerman says: "IIUIC this code was never enabled on ppc before, so disabling it seems like a reasonable fix to get the build clean" and once we have more actual feedback (and find any potential users) we can always re-enable it with the patch that fixes the issues and back-port as necessary. Fixes: 41b7a347bf14 ("powerpc: Book3S 64-bit outline-only KASAN support") Fixes: 26f4712aedbd ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder") Reported-and-tested-by: Guenter Roeck Link: https://lore.kernel.org/all/20220606153910.GA1773067@roeck-us.net/ Link: https://lore.kernel.org/all/20220618232737.2036722-1-linux@roeck-us.net/ Link: https://lore.kernel.org/all/20220713050724.GA2471738@roeck-us.net/ Acked-by: Michael Ellerman Acked-by: Alex Deucher Signed-off-by: Linus Torvalds

drm/display: Move HDCP helpers into display-helper module

2022-04-25T09:19:36Z

Move DRM's HDCP helper library into the display/ subdirectory and add it to DRM's display helpers. Split the header file into core and helpers. Update all affected drivers. No functional changes. v3: * fix Kconfig dependencies v2: * fix include statements (Jani, Javier) * update Kconfig symbols Signed-off-by: Thomas Zimmermann Reviewed-by: Javier Martinez Canillas Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-7-tzimmermann@suse.de

drm/amdgpu/display: fix dependencies for DRM_AMD_DC_SI

2021-10-04T19:23:02Z

Depends on DRM_AMDGPU_SI and DRM_AMD_DC Reviewed-by: Christian König Signed-off-by: Alex Deucher

drm/amdgpu/display: fold DRM_AMD_DC_DCN201 into DRM_AMD_DC_DCN

2021-10-04T19:23:02Z

No need for a separate kconfig option at this point. Reviewed-by: Zhan Liu Signed-off-by: Alex Deucher

drm/amd/display: add cyan_skillfish display support

2021-10-04T19:22:57Z

[Why] add display related cyan_skillfish files in. makefile controlled by CONFIG_DRM_AMD_DC_DCN201 flag. v2: squash in clang fixes from Harry, Nathan v3: squash in missing CONFIG_DRM_AMD_DC check (Alex) Signed-off-by: Charlene Liu Signed-off-by: Zhan Liu Reviewed-by: Charlene Liu Acked-by: Jun Lei Acked-by: Harry Wentland Acked-by: Alex Deucher Signed-off-by: Alex Deucher

drm/amd/display: Support crc on specific region

2021-03-05T20:11:47Z

[Why] To support feature that calculates CRTC CRC value on specific region (crc window). [How] 1. Use debugfs to specify crtc crc window 2. Use vline0 IRQ to write crtc crc window Signed-off-by: Wayne Lin Reviewed-by: Nicholas Kazlauskas Acked-by: Eryk Brol Acked-by: Rodrigo Siqueira Signed-off-by: Alex Deucher