linux-dev/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_link_encoder.c, branch linus/master

drm/amd/display: fix function scopes

2021-12-13T21:34:26Z

This turns previously global functions into static, thus removing compile-time warnings such as: warning: no previous prototype for 'get_highest_allowed_voltage_level' [-Wmissing-prototypes] 742 | unsigned int get_highest_allowed_voltage_level(uint32_t chip_family, uint32_t hw_internal_rev, uint32_t pci_revision_id) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ warning: no previous prototype for 'rv1_vbios_smu_send_msg_with_param' [-Wmissing-prototypes] 102 | int rv1_vbios_smu_send_msg_with_param(struct clk_mgr_internal *clk_mgr, unsigned int msg_id, unsigned int param) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Changes since v1: - As suggested by Rodrigo Siqueira: 1. Rewrite function signatures to make them more readable. 2. Get rid of unused functions in order to remove 'defined but not used' warnings. Reviewed-by: Rodrigo Siqueira Signed-off-by: Isabella Basso Signed-off-by: Alex Deucher

drm/amd/display: determine USB C DP2 mode only when USB DP Alt is enabled

2020-04-09T14:43:17Z

[why] When display is connected with a native DP port, DP2 mode register value is a don't care. Driver mistakenly reduce max supported lane count to 2 lane based on the don't care value. [how] Add additional check only if USB C DP alt mode is enabled, we will determine max lane count supported based on current mode. Signed-off-by: Wenjing Liu Reviewed-by: Aric Cyr Acked-by: Rodrigo Siqueira Signed-off-by: Alex Deucher

drm/amd/display: Drop CONFIG_DRM_AMD_DC_DCN2_0 and DSC_SUPPORTED

2019-11-13T20:29:44Z

[Why] DCN2 and DSC are stable enough to be build by default. So drop the flags. [How] Remove them using the unifdef tool. The following commands were executed in sequence: $ find -name '*.c' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DSC_SUPPORT -DCONFIG_DRM_AMD_DC_DCN2_0 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_0 '{}' ';' $ find -name '*.h' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DSC_SUPPORT -DCONFIG_DRM_AMD_DC_DCN2_0 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_0 '{}' ';' In addition: * Remove from kconfig, and replace any dependencies with DCN1_0. * Remove from any makefiles. * Fix and cleanup NV defninitions in dal_asic_id.h * Expand DCN1 ifdef to include DCN2 code in the following files: * clk_mgr/clk_mgr.c: dc_clk_mgr_create() * core/dc_resources.c: dc_create_resource_pool() * dce/dce_dmcu.c: dcn20_*lock_phy() * dce/dce_dmcu.c: dcn20_funcs * dce/dce_dmcu.c: dcn20_dmcu_create() * gpio/hw_factory.c: dal_hw_factory_init() * gpio/hw_translate.c: dal_hw_translate_init() Signed-off-by: Leo Li Signed-off-by: Bhawanpreet Lakha Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher

drm/amd/display: handle dp is usb-c

2019-10-17T20:30:23Z

This patch adds handling of dp is usb-c, it is not tested but is needed to support dp over usb-c Signed-off-by: Bhawanpreet Lakha Reviewed-by: Roman Li Signed-off-by: Alex Deucher

drm/amd/display: create dcn21_link_encoder files

2019-10-17T20:27:39Z

[Why] DCN20 and DCN21 have different phy programming sequences. [How] Create a separate dcn21_link_encoder for Renoir Signed-off-by: Bhawanpreet Lakha Reviewed-by: Roman Li Signed-off-by: Alex Deucher