linux-dev/drivers/gpu/drm/amd/display, branch master

drm/amd/display: only fill dirty rectangles when PSR is enabled

2022-11-09T23:07:59Z

Currently, we are calling fill_dc_dirty_rects() even if PSR isn't supported by the relevant link in amdgpu_dm_commit_planes(), this is undesirable especially because when drm.debug is enabled we are printing messages in fill_dc_dirty_rects() that are only useful for debugging PSR (and confusing otherwise). So, we can instead limit the filling of dirty rectangles to only when PSR is enabled. Reviewed-by: Leo Li Signed-off-by: Hamza Mahfooz Signed-off-by: Alex Deucher

drm/amd/display: Enforce minimum prefetch time for low memclk on DCN32

2022-11-09T23:04:13Z

[WHY?] Data return times when using lowest memclk can be <= 60us, which can cause underflow on high bandwidth displays with a workload. [HOW?] Enforce a minimum prefetch time during validation for low memclk modes. Reviewed-by: Jun Lei Acked-by: Alan Liu Signed-off-by: Dillon Varone Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher

drm/amd/display: Fix gpio port mapping issue

2022-11-09T23:03:13Z

[Why] 1. Port of gpio has different mapping. [How] 1. Add a dummy entry in mapping table. 2. Fix incorrect mask bit field access. Reviewed-by: Alvin Lee Acked-by: Alan Liu Signed-off-by: Steve Su Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher

drm/amd/display: Fix reg timeout in enc314_enable_fifo

2022-11-09T23:01:59Z

[Why] The link enablement sequence can end up resetting the encoder while the PHY symclk isn't yet on. This means that waiting for symclk on will timeout, along with the reset bit never asserting high. This causes unnecessary delay when enabling the link and produces a warning affecting multiple IGT tests. [How] Don't wait for the symclk to be on here because firmware already does. Don't wait for reset if we know the symclk isn't on. Split the reset into a helper function that checks the bit and decides whether or not a delay is sufficient. Reviewed-by: Roman Li Acked-by: Alan Liu Signed-off-by: Nicholas Kazlauskas Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org # 6.0.x

drm/amd/display: Fix FCLK deviation and tool compile issues

2022-11-09T23:01:47Z

[Why] Recent backports from open source do not have header inclusion pattern that is consistent with inclusion style in the rest of the file. This breaks the internal tool builds as well. A recent commit erronously modified the original DML formula for calculating ActiveClockChangeLatencyHidingY. This resulted in a FCLK deviation from the golden values. [How] Change the way in which display_mode_vba.h is included so that it is consistent with the inclusion style in rest of the file which also fixes the tool build. Restore the DML formula to its original state to fix the FCLK deviation. Reviewed-by: Aurabindo Pillai Reviewed-by: Jun Lei Acked-by: Alan Liu Signed-off-by: Chaitanya Dhere Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher

drm/amd/display: Zeromem mypipe heap struct before using it

2022-11-09T23:00:11Z

[Why&How] Bug was caused when moving variable from stack to heap because it was reusable and garbage was left over, so we need to zero mem. Reviewed-by: Martin Leung Acked-by: Alan Liu Signed-off-by: Aurabindo Pillai Signed-off-by: Martin Leung Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher

drm/amd/display: Update SR watermarks for DCN314

2022-11-09T22:59:10Z

[Why & How] New values requested by hardware after fine-tuning. Update for all memory types. Reviewed-by: Jun Lei Acked-by: Alan Liu Signed-off-by: Nicholas Kazlauskas Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org # 6.0.x

drm/amd/display: Investigate tool reported FCLK P-state deviations

2022-11-02T21:16:25Z

[Why] Fix for some of the tool reported modes for FCLK P-state deviations and UCLK P-state deviations that are coming from DSC terms and/or Scaling terms causing MinActiveFCLKChangeLatencySupported and MaxActiveDRAMClockChangeLatencySupported incorrectly calculated in DML for these configurations. Reviewed-by: Chaitanya Dhere Acked-by: Jasdeep Dhillon Acked-by: Alex Hung Signed-off-by: Nevenko Stupar Tested-by: Mark Broadworth Signed-off-by: Alex Deucher

drm/amd/display: Add DSC delay factor workaround

2022-11-02T21:16:25Z

[Why] Certain 4K high refresh rate modes requiring DSC are exhibiting top of screen underflow corruption. Increasing the DSC delay by a factor of 6 percent stops the underflow for most use cases. [How] Multiply DSC delay requirement in DML by a factor. Add debug option to make this DSC delay factor configurable. Reviewed-by: Alvin Lee Acked-by: Alex Hung Signed-off-by: George Shen Tested-by: Mark Broadworth Signed-off-by: Alex Deucher

drm/amd/display: Round up DST_after_scaler to nearest int

2022-11-02T21:16:25Z

[Why] The DST_after_scaler value that DML spreadsheet outputs is generally the driver value round up to the nearest int. Reviewed-by: Alvin Lee Acked-by: Alex Hung Signed-off-by: George Shen Tested-by: Mark Broadworth Signed-off-by: Alex Deucher