linux-dev/drivers/gpu/drm/bridge/Makefile, branch master

drm/bridge: imx: Add i.MX8qm/qxp pixel combiner support

2022-06-20T19:15:07Z

This patch adds a drm bridge driver for i.MX8qm/qxp pixel combiner. The pixel combiner takes two output streams from a single display controller and manipulates the two streams to support a number of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured as either one screen, two screens, or virtual screens. The pixel combiner is also responsible for generating some of the control signals for the pixel link output channel. For now, the driver only supports the bypass mode. Reviewed-by: Robert Foss Tested-by: Marcel Ziswiler # Colibri iMX8X, LT170410-2WHC, LP156WF1 Signed-off-by: Liu Ying Acked-by: Sakari Ailus Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-5-victor.liu@nxp.com

drm: bridge: Add TI DLPC3433 DSI to DMD bridge

2022-06-03T14:23:31Z

TI DLPC3433 is a MIPI DSI based display controller bridge for processing high resolution DMD based projectors. It has a flexible configuration of MIPI DSI and DPI signal input that produces a DMD output in RGB565, RGB666, RGB888 formats. It supports upto 720p resolution with 60 and 120 Hz refresh rates. Add bridge driver for it. Signed-off-by: Christopher Vollo Signed-off-by: Jagan Teki Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20220603140349.3563612-2-jagan@amarulasolutions.com

drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge

2022-05-02T14:44:55Z

The i.MX8MP contains two syscon registers which are responsible for configuring the on-SoC DPI-to-LVDS serializer. Implement a simple bridge driver for this serializer. -- - Add sentinel of_device_table - Add RB from Sam - Rename to fsl-ldb altogether Reviewed-by: Sam Ravnborg Signed-off-by: Marek Vasut Cc: Laurent Pinchart Cc: Lucas Stach Cc: Maxime Ripard Cc: Peng Fan Cc: Robby Cai Cc: Robert Foss Cc: Sam Ravnborg Cc: Thomas Zimmermann To: dri-devel@lists.freedesktop.org V2: - Rename syscon to fsl,syscon V3: - Consistently use MX8MP V4: - Fix MODULE_DESCRIPTION to also use MX8MP Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20220426193645.244792-2-marex@denx.de

drm/bridge: lt9211: Add Lontium LT9211 bridge driver

2022-04-19T14:47:38Z

Add driver for Lontium LT9211 Single/Dual-Link DSI/LVDS or Single DPI to Single-link/Dual-Link DSI/LVDS or Single DPI bridge. This chip is highly capable at converting formats, but sadly it is also highly undocumented. This driver is written without any documentation from Lontium and based only on shreds of information available in various obscure example codes, hence long runs of unknown register patches and lengthy delays in various places. Whichever register meaning could be divined from its behavior has at least a comment around it. Currently the only mode tested is Single-link DSI to Single-link LVDS. Dual-link LVDS might work as well, the register programming is in place, but is untested. Reviewed-by: Robert Foss Signed-off-by: Marek Vasut Cc: Laurent Pinchart Cc: Lucas Stach Cc: Maxime Ripard Cc: Robert Foss Cc: Sam Ravnborg Cc: Thomas Zimmermann To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20220419143958.94873-2-marex@denx.de

drm/bridge: add it6505 driver

2022-02-01T10:20:21Z

This adds support for the iTE IT6505. This device can convert DPI signal to DP output. From: Allen Chen Tested-by: Hsin-yi Wang Signed-off-by: Hermes Wu Signed-off-by: Allen Chen Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20220114091502.333083-1-allen.chen@ite.com.tw

drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver

2021-06-08T09:42:25Z

Add driver for TI SN65DSI83 Single-link DSI to Single-link LVDS bridge and TI SN65DSI84 Single-link DSI to Dual-link or 2x Single-link LVDS bridge. TI SN65DSI85 is unsupported due to lack of hardware to test on, but easy to add. The driver operates the chip via I2C bus. Currently the LVDS clock are always derived from DSI clock lane, which is the usual mode of operation. Support for clock from external oscillator is not implemented, but it is easy to add if ever needed. Only RGB888 pixel format is implemented, the LVDS666 is not supported, but could be added if needed. Reviewed-by: Linus Walleij Reviewed-by: Frieder Schrempf Tested-by: Frieder Schrempf Tested-by: Adam Ford Signed-off-by: Marek Vasut Cc: Douglas Anderson Cc: Jagan Teki Cc: Laurent Pinchart Cc: Linus Walleij Cc: Loic Poulain Cc: Philippe Schenker Cc: Sam Ravnborg Cc: Stephen Boyd Cc: Valentin Raevsky To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20210607174258.16300-2-marex@denx.de

drm/bridge: Add ChromeOS EC ANX7688 bridge driver support

2021-05-18T14:41:01Z

This driver adds support for the ChromeOS EC ANX7688 HDMI to DP converter For our use case, the only reason the Linux kernel driver is necessary is to reject resolutions that require more bandwidth than what is available on the DP side. DP bandwidth and lane count are reported by the bridge via 2 registers and, as far as we know, only chips that have a firmware version greater than 0.85 support these two registers. Signed-off-by: Nicolas Boichat Signed-off-by: Hsin-Yi Wang [The driver is OF only so should depends on CONFIG_OF] Reported-by: kbuild test robot Signed-off-by: Enric Balletbo i Serra [convert to i2c driver, rename to cros_ec_anx7688, add err checks] Signed-off-by: Dafna Hirschfeld Reviewed-by: Laurent Pinchart Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20210518141927.24795-3-dafna.hirschfeld@collabora.com

drm: bridge: add it66121 driver

2021-04-21T11:51:29Z

This commit is a simple driver for bridge HMDI it66121. The input format is RBG and there is no color conversion. Audio, HDCP and CEC are not supported yet. Signed-off-by: Phong LE Signed-off-by: Neil Armstrong Reviewed-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20210419071223.2673533-3-narmstrong@baylibre.com

drm/bridge: Introduce LT8912B DSI to HDMI bridge

2021-03-26T14:40:20Z

Lontium LT8912B is a DSI to HDMI bridge. Reported-by: kernel test robot Signed-off-by: Adrien Grassein Reviewed-by: Robert Foss Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20210326121955.1266230-3-adrien.grassein@gmail.com

drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridge

2021-03-25T16:46:08Z

ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone. It has a flexible configuration of MIPI DSI signal input and produce RGB565, RGB666, RGB888 output format. Add bridge driver for it. Signed-off-by: Jagan Teki Reviewed-by: Robert Foss Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20210322103328.66442-2-jagan@amarulasolutions.com