linux-dev/drivers/gpu/drm/bridge, branch linus/master

Merge v5.19-rc1 into drm-misc-fixes

2022-06-08T17:11:27Z

Let's kick-off the start of the 5.19 fix cycle Signed-off-by: Maxime Ripard

drm/bridge: analogix_dp: Support PSR-exit to disable transition

2022-06-06T20:25:59Z

Most eDP panel functions only work correctly when the panel is not in self-refresh. In particular, analogix_dp_bridge_disable() tends to hit AUX channel errors if the panel is in self-refresh. Given the above, it appears that so far, this driver assumes that we are never in self-refresh when it comes time to fully disable the bridge. Prior to commit 846c7dfc1193 ("drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2."), this tended to be true, because we would automatically disable the pipe when framebuffers were removed, and so we'd typically disable the bridge shortly after the last display activity. However, that is not guaranteed: an idle (self-refresh) display pipe may be disabled, e.g., when switching CRTCs. We need to exit PSR first. Stable notes: this is definitely a bugfix, and the bug has likely existed in some form for quite a while. It may predate the "PSR helpers" refactor, but the code looked very different before that, and it's probably not worth rewriting the fix. Cc: Fixes: 6c836d965bad ("drm/rockchip: Use the helpers for PSR") Signed-off-by: Brian Norris Reviewed-by: Sean Paul Signed-off-by: Douglas Anderson Link: https://patchwork.freedesktop.org/patch/msgid/20220228122522.v2.1.I161904be17ba14526f78536ccd78b85818449b51@changeid

Merge tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm

2022-05-25T23:18:27Z

Pull drm updates from Dave Airlie: "Intel have enabled DG2 on certain SKUs for laptops, AMD has started some new GPU support, msm has user allocated VA controls dma-buf: - add dma_resv_replace_fences - add dma_resv_get_singleton - make dma_excl_fence private core: - EDID parser refactorings - switch drivers to drm_mode_copy/duplicate - DRM managed mutex initialization display-helper: - put HDMI, SCDC, HDCP, DSC and DP into new module gem: - rework fence handling ttm: - rework bulk move handling - add common debugfs for resource managers - convert to kvcalloc format helpers: - support monochrome formats - RGB888, RGB565 to XRGB8888 conversions fbdev: - cfb/sys_imageblit fixes - pagelist corruption fix - create offb platform device - deferred io improvements sysfb: - Kconfig rework - support for VESA mode selection bridge: - conversions to devm_drm_of_get_bridge - conversions to panel_bridge - analogix_dp - autosuspend support - it66121 - audio support - tc358767 - DSI to DPI support - icn6211 - PLL/I2C fixes, DT property - adv7611 - enable DRM_BRIDGE_OP_HPD - anx7625 - fill ELD if no monitor - dw_hdmi - add audio support - lontium LT9211 support, i.MXMP LDB - it6505: Kconfig fix, DPCD set power fix - adv7511 - CEC support for ADV7535 panel: - ltk035c5444t, B133UAN01, NV3052C panel support - DataImage FG040346DSSWBG04 support - st7735r - DT bindings fix - ssd130x - fixes i915: - DG2 laptop PCI-IDs ("motherboard down") - Initial RPL-P PCI IDs - compute engine ABI - DG2 Tile4 support - DG2 CCS clear color compression support - DG2 render/media compression formats support - ATS-M platform info - RPL-S PCI IDs added - Bump ADL-P DMC version to v2.16 - Support static DRRS - Support multiple eDP/LVDS native mode refresh rates - DP HDR support for HSW+ - Lots of display refactoring + fixes - GuC hwconfig support and query - sysfs support for multi-tile - fdinfo per-client gpu utilisation - add geometry subslices query - fix prime mmap with LMEM - fix vm open count and remove vma refcounts - contiguous allocation fixes - steered register write support - small PCI BAR enablement - GuC error capture support - sunset igpu legacy mmap support for newer devices - GuC version 70.1.1 support amdgpu: - Initial SoC21 support - SMU 13.x enablement - SMU 13.0.4 support - ttm_eu cleanups - USB-C, GPUVM updates - TMZ fixes for RV - RAS support for VCN - PM sysfs code cleanup - DC FP rework - extend CG/PG flags to 64-bit - SI dpm lockdep fix - runtime PM fixes amdkfd: - RAS/SVM fixes - TLB flush fixes - CRIU GWS support - ignore bogus MEC signals more efficiently msm: - Fourcc modifier for tiled but not compressed layouts - Support for userspace allocated IOVA (GPU virtual address) - DPU: DSC (Display Stream Compression) support - DP: eDP support - DP: conversion to use drm_bridge and drm_bridge_connector - Merge DPU1 and MDP5 MDSS driver - DPU: writeback support nouveau: - make some structures static - make some variables static - switch to drm_gem_plane_helper_prepare_fb radeon: - misc fixes/cleanups mxsfb: - rework crtc mode setting - LCDIF CRC support etnaviv: - fencing improvements - fix address space collisions - cleanup MMU reference handling gma500: - GEM/GTT improvements - connector handling fixes komeda: - switch to plane reset helper mediatek: - MIPI DSI improvements omapdrm: - GEM improvements qxl: - aarch64 support vc4: - add a CL submission tracepoint - HDMI YUV support - HDMI/clock improvements - drop is_hdmi caching virtio: - remove restriction of non-zero blob types vmwgfx: - support for cursormob and cursorbypass 4 - fence improvements tidss: - reset DISPC on startup solomon: - SPI support - DT improvements sun4i: - allwinner D1 support - drop is_hdmi caching imx: - use swap() instead of open-coding - use devm_platform_ioremap_resource - remove redunant initializations ast: - Displayport support rockchip: - Refactor IOMMU initialisation - make some structures static - replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi - support swapped YUV formats, - clock improvements - rk3568 support - VOP2 support mediatek: - MT8186 support tegra: - debugabillity improvements" * tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm: (1740 commits) drm/i915/dsi: fix VBT send packet port selection for ICL+ drm/i915/uc: Fix undefined behavior due to shift overflowing the constant drm/i915/reg: fix undefined behavior due to shift overflowing the constant drm/i915/gt: Fix use of static in macro mismatch drm/i915/audio: fix audio code enable/disable pipe logging drm/i915: Fix CFI violation with show_dynamic_id() drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c drm/i915/gt: Fix build error without CONFIG_PM drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotations drm/msm: don't free the IRQ if it was not requested drm/msm/dpu: limit writeback modes according to max_linewidth drm/amd: Don't reset dGPUs if the system is going to s2idle drm/amdgpu: Unmap legacy queue when MES is enabled drm: msm: fix possible memory leak in mdp5_crtc_cursor_set() drm/msm: Fix fb plane offset calculation drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init drm/msm/dsi: don't powerup at modeset time for parade-ps8640 drm/rockchip: Change register space names in vop2 dt-bindings: display: rockchip: make reg-names mandatory for VOP2 ...

drm/bridge: ti-sn65dsi83: Handle dsi_lanes == 0 as invalid

2022-05-21T15:28:41Z

Handle empty data-lanes = < >; property, which translates to dsi_lanes = 0 as invalid. Fixes: ceb515ba29ba6 ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver") Signed-off-by: Marek Vasut Cc: Jonas Karlman Cc: Laurent Pinchart Cc: Lucas Stach Cc: Marek Vasut Cc: Maxime Ripard Cc: Neil Armstrong Cc: Robert Foss Cc: Sam Ravnborg Reviewed-by: Andrzej Hajda Reviewed-by: Lucas Stach Link: https://patchwork.freedesktop.org/patch/msgid/20220518233844.248504-1-marex@denx.de

drm/bridge: tc358767: Fix DP bridge mode detection from DT endpoints

2022-05-04T23:03:50Z

Per toshiba,tc358767.yaml DT binding document, port@2 the output (e)DP port is optional. In case this port is not described in DT, the bridge driver operates in DPI-to-DP mode. Make sure the driver treats this as a valid mode of operation instead of reporting invalid mode. Fixes: 71f7d9c03118 ("drm/bridge: tc358767: Detect bridge mode from connected endpoints in DT") Signed-off-by: Marek Vasut Cc: Jonas Karlman Cc: Laurent Pinchart Cc: Lucas Stach Cc: Marek Vasut Cc: Maxime Ripard Cc: Neil Armstrong Cc: Robert Foss Cc: Sam Ravnborg Reviewed-by: Lucas Stach Link: https://patchwork.freedesktop.org/patch/msgid/20220429204625.241591-1-marex@denx.de

drm/bridge: ite-it6505: add missing Kconfig option select

2022-05-04T08:14:16Z

The IT6505 is using functions provided by the DRM_DP_HELPER driver. In order to avoid having the bridge enabled but the helper disabled, let's add a select in order to be sure that the DP helper functions are always available. Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver") Signed-off-by: Fabien Parent Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20220426141536.274727-1-fparent@baylibre.com

drm/bridge: tfp410: Make tfp410_fini() return void

2022-05-02T14:51:13Z

tfp410_fini() always returns zero. Make it return no value which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c and platform driver remove callbacks is ignored anyway. This prepares making i2c and platform remove callbacks return void, too. Signed-off-by: Uwe Kleine-König Reviewed-by: Laurent Pinchart Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20220428162803.185275-1-u.kleine-koenig@pengutronix.de

drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge

2022-05-02T14:44:55Z

The i.MX8MP contains two syscon registers which are responsible for configuring the on-SoC DPI-to-LVDS serializer. Implement a simple bridge driver for this serializer. -- - Add sentinel of_device_table - Add RB from Sam - Rename to fsl-ldb altogether Reviewed-by: Sam Ravnborg Signed-off-by: Marek Vasut Cc: Laurent Pinchart Cc: Lucas Stach Cc: Maxime Ripard Cc: Peng Fan Cc: Robby Cai Cc: Robert Foss Cc: Sam Ravnborg Cc: Thomas Zimmermann To: dri-devel@lists.freedesktop.org V2: - Rename syscon to fsl,syscon V3: - Consistently use MX8MP V4: - Fix MODULE_DESCRIPTION to also use MX8MP Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20220426193645.244792-2-marex@denx.de

drm: bridge: adv7511: use non-legacy mode for CEC RX

2022-05-02T14:38:47Z

The ADV7511 family of bridges supports two modes for CEC RX: legacy and non-legacy mode. The only difference is whether the chip uses a single CEC RX buffer, or uses all three available RX buffers. Currently the adv7511 driver uses legacy mode. While debugging a stall in CEC RX on an ADV7535, we reached out to Analog Devices, who suggested to use non-legacy mode instead. According to the programming guide for the ADV7511 [1], and the register control manual of the ADV7535 [2], this is the default behaviour on reset. As previously stated, the adv7511 driver currently overrides this to legacy mode. This patch updates the adv7511 driver to instead use non-legacy mode with all three CEC RX buffers. As a result of this change, we no longer experience any stalling of CEC RX with the ADV7535. It is not known why non-legacy mode solves this particular issue, but besides this, no functional change is to be expected by this patch. Please note that this has only been tested on an ADV7535. What follows is a brief description of the non-legacy mode interrupt handling behaviour. The programming guide in [1] gives a more detailed explanation. With three RX buffers, the interrupt handler checks the CEC_RX_STATUS register (renamed from CEC_RX_ENABLE in this patch), which contains 2-bit psuedo-timestamps for each of the RX buffers. The RX timestamps for each buffer represent the time of arrival for the CEC frame held in a given buffer, with lower timestamp values indicating chronologically older frames. A special value of 0 indicates that the given RX buffer is inactive and should be skipped. The interrupt handler parses these timestamps and then reads the active RX buffers in the prescribed order using the same logic as before. Changes have been made to ensure that the correct RX buffer is cleared after processing. This clearing procesure also sets the timestamp of the given RX buffer to 0 to mark it as inactive. [1] https://www.analog.com/media/en/technical-documentation/user-guides/ADV7511_Programming_Guide.pdf cf. CEC Map, register 0x4A, bit 3, default value 1: 0 = Use only buffer 0 to store CEC frames (Legacy mode) 1 = Use all 3 buffers to stores the CEC frames (Non-legacy mode) [2] The ADV7535 register control manual is under NDA, but trust me when I say that non-legacy CEC RX mode is the default here too. Here the register is offset by 0x70 and has an address of 0xBA in the DSI_CEC regiser map. Signed-off-by: Alvin Šipraga Reviewed-by: Robert Foss Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20220423120854.1503163-3-alvin@pqrs.dk

drm: bridge: adv7511: enable CEC support for ADV7535

2022-05-02T14:38:45Z

Like the ADV7533, the ADV7535 has an offset for the CEC register map, and it is the same value (ADV7533_REG_CEC_OFFSET = 0x70). Rather than testing for numerous chip types in the offset calculations throughout the driver, just compute it during driver probe and put it in the private adv7511 data structure. Signed-off-by: Alvin Šipraga Reviewed-by: Robert Foss Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20220423120854.1503163-2-alvin@pqrs.dk