linux-dev/drivers/gpu/drm/msm/dsi/dsi_manager.c, branch linus/master

Merge tag 'msm-next-5.19-fixes' of https://gitlab.freedesktop.org/abhinavk/msm into drm-next

2022-05-20T06:35:52Z

5.19 fixes for msm-next - Limiting WB modes to max sspp linewidth - Fixing the supported rotations to add 180 back for IGT - Fix to handle pm_runtime_get_sync() errors to avoid unclocked access in the bind() path for dpu driver - Fix the irq_free() without request issue which was a big-time hitter in the CI-runs. Signed-off-by: Abhinav Kumar Signed-off-by: Dave Airlie From: Abhinav Kumar Link: https://patchwork.freedesktop.org/patch/msgid/b011d51d-d634-123e-bf5f-27219ee33151@quicinc.com

drm/msm/dsi: don't powerup at modeset time for parade-ps8640

2022-05-18T17:51:42Z

Commit 7d8e9a90509f ("drm/msm/dsi: move DSI host powerup to modeset time") caused sc7180 Chromebooks that use the parade-ps8640 bridge chip to fail to turn the display back on after it turns off. Unfortunately, it doesn't look easy to fix the parade-ps8640 driver to handle the new power sequence. The Linux driver has almost nothing in it and most of the logic for this bridge chip is in black-box firmware that the bridge chip uses. Also unfortunately, reverting the patch will break "tc358762". The long term solution here is probably Dave Stevenson's series [1] that would give more flexibility. However, that is likely not a quick fix. For the short term, we'll look at the compatible of the next bridge in the chain and go back to the old way for the Parade PS8640 bridge chip. If it's found that other bridge chips also need this workaround then we can add them to the list or consider inverting the condition. However, the hope is that the framework will not take too much longer to land and we won't have to add anything other than ps8640 here. [1] https://lore.kernel.org/r/cover.1646406653.git.dave.stevenson@raspberrypi.com Fixes: 7d8e9a90509f ("drm/msm/dsi: move DSI host powerup to modeset time") Suggested-by: Rob Clark Signed-off-by: Douglas Anderson Reviewed-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Link: https://lore.kernel.org/r/20220513131504.v5.1.Ia196e35ad985059e77b038a41662faae9e26f411@changeid Signed-off-by: Rob Clark

Merge tag 'drm-msm-next-2022-05-09' of https://gitlab.freedesktop.org/drm/msm into drm-next

2022-05-11T02:40:47Z

- Fourcc modifier for tiled but not compressed layouts - Support for userspace allocated IOVA (GPU virtual address) - Devfreq clamp_to_idle fix - DPU: DSC (Display Stream Compression) support - DPU: inline rotation support on SC7280 - DPU: update DP timings to follow vendor recommendations - DP, DPU: add support for wide bus (on newer chipsets) - DP: eDP support - Merge DPU1 and MDP5 MDSS driver, make dpu/mdp device the master component - MDSS: optionally reset the IP block at the bootup to drop bootloader state - Properly register and unregister internal bridges in the DRM framework - Complete DPU IRQ cleanup - DP: conversion to use drm_bridge and drm_bridge_connector - eDP: drop old eDP parts again - DPU: writeback support - Misc small fixes Signed-off-by: Dave Airlie From: Rob Clark Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvJCr_1D8d0dgmyQC5HD4gmXeZw=bFV_CNCfceZbpMxRw@mail.gmail.com

drm/msm/dsi: add mode valid callback for dsi_mgr

2022-04-25T21:56:22Z

Add a mode valid callback for dsi_mgr for checking mode being valid in case of DSC. For DSC the height and width needs to be multiple of slice, so we check that here Reviewed-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Signed-off-by: Vinod Koul Patchwork: https://patchwork.freedesktop.org/patch/480930/ Link: https://lore.kernel.org/r/20220406094031.1027376-13-vkoul@kernel.org Signed-off-by: Dmitry Baryshkov

drm/msm: properly add and remove internal bridges

2022-04-25T21:50:46Z

Add calls to drm_bridge_add()/drm_bridge_remove() DRM bridges created by the driver. This fixes the following warning. WARNING: CPU: 0 PID: 1 at kernel/locking/mutex.c:579 __mutex_lock+0x840/0x9f4 DEBUG_LOCKS_WARN_ON(lock->magic != lock) Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.18.0-rc1-00002-g3054695a0d27-dirty #55 Hardware name: Generic DT based system unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0xc8/0x1e8 __warn from warn_slowpath_fmt+0x78/0xa8 warn_slowpath_fmt from __mutex_lock+0x840/0x9f4 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from drm_bridge_hpd_enable+0x2c/0x84 drm_bridge_hpd_enable from msm_hdmi_modeset_init+0xc0/0x21c msm_hdmi_modeset_init from mdp4_kms_init+0x53c/0x90c mdp4_kms_init from msm_drm_bind+0x514/0x698 msm_drm_bind from try_to_bring_up_aggregate_device+0x160/0x1bc try_to_bring_up_aggregate_device from component_master_add_with_match+0xc4/0xf8 component_master_add_with_match from msm_pdev_probe+0x274/0x350 msm_pdev_probe from platform_probe+0x5c/0xbc platform_probe from really_probe.part.0+0x9c/0x290 really_probe.part.0 from __driver_probe_device+0xa8/0x13c __driver_probe_device from driver_probe_device+0x34/0x10c driver_probe_device from __driver_attach+0xbc/0x178 __driver_attach from bus_for_each_dev+0x74/0xc0 bus_for_each_dev from bus_add_driver+0x160/0x1e4 bus_add_driver from driver_register+0x88/0x118 driver_register from do_one_initcall+0x6c/0x334 do_one_initcall from kernel_init_freeable+0x1bc/0x220 kernel_init_freeable from kernel_init+0x18/0x12c kernel_init from ret_from_fork+0x14/0x2c Fixes: 3d3f8b1f8b62 ("drm/bridge: make bridge registration independent of drm flow") Reported-by: kernel test robot Signed-off-by: Dmitry Baryshkov Reviewed-by: Stephen Boyd Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/481778/ Link: https://lore.kernel.org/r/20220411234953.2425280-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov

drm/msm/dsi: Use connector directly in msm_dsi_manager_connector_init()

2022-04-11T16:36:13Z

The member 'msm_dsi->connector' isn't assigned until msm_dsi_manager_connector_init() returns (see msm_dsi_modeset_init() and how it assigns the return value). Therefore this pointer is going to be NULL here. Let's use 'connector' which is what was intended. Cc: Dmitry Baryshkov Cc: Sean Paul Fixes: 6d5e78406991 ("drm/msm/dsi: Move dsi panel init into modeset init path") Signed-off-by: Stephen Boyd Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/478693/ Link: https://lore.kernel.org/r/20220318000731.2823718-1-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Rob Clark

Merge branches 'msm-next-lumag-core', 'msm-next-lumag-dpu', 'msm-next-lumag-dp', 'msm-next-lumag-dsi', 'msm-next-lumag-hdmi' and 'msm-next-lumag-mdp5' into msm-next-lumag

2022-02-19T02:31:42Z

drm/msm/dsi: move DSI host powerup to modeset time

2022-02-18T15:33:00Z

The DSI subsystem does not fully fall into the pre-enable/enable system of callbacks, since typically DSI device bridge drivers expect to be able to communicate with DSI devices at the pre-enable() callback. The reason is that for some DSI hosts enabling the video stream would prevent other drivers from sending DSI commands. For example see the panel-bridge driver, which does drm_panel_prepare() from the pre_enable() callback (which would be called before our pre_enable() callback, resulting in panel preparation failures as the link is not yet ready). Therewere several attempts to solve this issue, but currently the best approach is to power up the DSI link from the mode_set() callback, allowing next bridge/panel to use DSI transfers in the pre_enable() time. Follow this approach. Signed-off-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Link: https://lore.kernel.org/r/20211207222901.988484-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov

drm/msm: reduce usage of round_pixclk callback

2022-02-18T15:32:52Z

The round_pixclk() callback returns different rate only on MDP4 in HDMI (DTV) case. Stop using this callback in other cases to simplify mode_valid callbacks. Signed-off-by: Dmitry Baryshkov Reviewed-by: Stephen Boyd Reviewed-by: Abhinav Kumar Link: https://lore.kernel.org/r/20220106070656.482882-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov

drm/msm/dsi: fix initialization in the bonded DSI case

2021-12-08T17:12:58Z

Commit 739b4e7756d3 ("drm/msm/dsi: Fix an error code in msm_dsi_modeset_init()") changed msm_dsi_modeset_init() to return an error code in case msm_dsi_manager_validate_current_config() returns false. However this is not an error case, but a slave DSI of the bonded DSI link. In this case msm_dsi_modeset_init() should return 0, but just skip connector and bridge initialization. To reduce possible confusion, drop the msm_dsi_manager_validate_current_config() function, and specif 'bonded && !master' condition directly in the msm_dsi_modeset_init(). Fixes: 739b4e7756d3 ("drm/msm/dsi: Fix an error code in msm_dsi_modeset_init()") Signed-off-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Link: https://lore.kernel.org/r/20211125180114.561278-1-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark