linux-dev/drivers/gpu/drm/msm/hdmi, branch master

drm/msm/hdmi: fix IRQ lifetime

2022-09-30T16:57:53Z

Device-managed resources allocated post component bind must be tied to the lifetime of the aggregate DRM device or they will not necessarily be released when binding of the aggregate device is deferred. This is specifically true for the HDMI IRQ, which will otherwise remain requested so that the next bind attempt fails when requesting the IRQ a second time. Fix this by tying the device-managed lifetime of the HDMI IRQ to the DRM device so that it is released when bind fails. Fixes: 067fef372c73 ("drm/msm/hdmi: refactor bind/init") Cc: stable@vger.kernel.org # 3.19 Reviewed-by: Dmitry Baryshkov Signed-off-by: Johan Hovold Tested-by: Kuogee Hsieh Reviewed-by: Kuogee Hsieh Patchwork: https://patchwork.freedesktop.org/patch/502666/ Link: https://lore.kernel.org/r/20220913085320.8577-9-johan+linaro@kernel.org Signed-off-by: Abhinav Kumar

drm/msm/hdmi: fix memory corruption with too many bridges

2022-09-30T16:57:53Z

Add the missing sanity check on the bridge counter to avoid corrupting data beyond the fixed-sized bridge array in case there are ever more than eight bridges. Fixes: a3376e3ec81c ("drm/msm: convert to drm_bridge") Cc: stable@vger.kernel.org # 3.12 Signed-off-by: Johan Hovold Tested-by: Kuogee Hsieh Reviewed-by: Kuogee Hsieh Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/502670/ Link: https://lore.kernel.org/r/20220913085320.8577-5-johan+linaro@kernel.org Signed-off-by: Abhinav Kumar

drm/msm/hdmi: make hdmi_phy_8996 OF clk provider

2022-09-18T16:38:07Z

On MSM8996 the HDMI PHY provides the PLL clock to the MMCC. As we are preparing to convert the MSM8996 to use DT clocks properties (rather than global clock names), register the OF clock provider. While we are at it, also change the driver to use clk_parent_data rather parent_names to setup a link to the XO clock. Signed-off-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/492318/ Link: https://lore.kernel.org/r/20220704161148.814510-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Rob Clark

Merge tag 'drm-msm-next-2022-07-10' of https://gitlab.freedesktop.org/drm/msm into drm-next

2022-07-13T00:55:53Z

Next for v5.20 GPU: - a619 support - Fix for unclocked GMU register access - Devcore dump enhancements Core: - client utilization via fdinfo support - fix fence rollover issue - gem: Lockdep false-positive warning fix - gem: Switch to pfn mappings DPU: - constification of HW catalog - support for using encoder as CRC source - WB support on sc7180 - WB resolution fixes DP: - dropped custom bulk clock implementation - made dp_bridge_mode_valid() return MODE_CLOCK_HIGH where applicable - fix link retraining on resolution change MDP5: - MSM8953 perf data HDMI: - YAML'ification of schema - dropped obsolete GPIO support - misc cleanups Signed-off-by: Dave Airlie From: Rob Clark Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtuqswBGPw-kCYzJvckK2RR1XTeUEgaXwVG_mvpbv3gPA@mail.gmail.com

drm/msm/hdmi: support attaching the "next" bridge

2022-07-04T18:05:30Z

There might be a chain of bridges attached to the HDMI node (including but not limited to the display-connector bridge). Add support for attaching them right to the HDMI bridge chain. Signed-off-by: Dmitry Baryshkov Reviewed-by: Stephen Boyd Patchwork: https://patchwork.freedesktop.org/patch/489709/ Link: https://lore.kernel.org/r/20220616085057.432353-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov

drm/msm/hdmi: drop empty bridge callbacks

2022-07-04T18:05:30Z

Drop empty callbacks msm_hdmi_bridge_enable() and msm_hdmi_bridge_disable(). Signed-off-by: Dmitry Baryshkov Reviewed-by: Stephen Boyd Patchwork: https://patchwork.freedesktop.org/patch/489707/ Link: https://lore.kernel.org/r/20220616085054.432317-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov

drm/msm/hdmi-phy: populate 8x60 HDMI PHY requirements

2022-07-04T18:05:30Z

Declare that 8x60 HDMI PHY uses the core-vdda regulator and slave_iface clock (this is the same config as is used by the 8960). Reviewed-by: Stephen Boyd Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/488863/ Link: https://lore.kernel.org/r/20220609122350.3157529-13-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov

drm/msm/hdmi: reuse MSM8960's config for MSM8660

2022-07-04T18:05:30Z

MSM8660 requires the same set of clocks and regulators as MSM8960. Reuse MSM8960's config for the MSM8660 (8x60). Reviewed-by: Stephen Boyd Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/488864/ Link: https://lore.kernel.org/r/20220609122350.3157529-12-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov

drm/msm/hdmi: merge platform config for 8974/8084/8994/8996

2022-07-04T18:05:30Z

Since there is no more difference between the HDMI platform data between MSM8974/APQ8084/MSM8994/MSM8996, merge these configs into a single entry. Reviewed-by: Stephen Boyd Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/488868/ Link: https://lore.kernel.org/r/20220609122350.3157529-11-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov

drm/msm/hdmi: drop hpd_regs usage on 8x74/8084

2022-07-04T18:05:30Z

The MSM HDMI driver has support for hpd_regs on 8x74/8084: supply regulators that are to be enabled for HPD to work. Currently these regulators contain the hpd_gdsc, which was replaced by the power-domains support and hpd-5v/hpd-5v-en, which are not used by the chip itself. They power up the ESD bridge. However it is a separate device which should be represented separately in the device tree. None of upstreamed devices support these properties. Thus drop support for them from the HDMI driver. Reviewed-by: Stephen Boyd Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/488860/ Link: https://lore.kernel.org/r/20220609122350.3157529-10-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov