linux-dev/drivers/gpu/drm/msm, branch linus/master

Merge tag 'drm-next-2022-06-03-1' of git://anongit.freedesktop.org/drm/drm

2022-06-03T16:49:29Z

Pull more drm updates from Dave Airlie: "This is mostly regular fixes, msm and amdgpu. There is a tegra patch that is bit of prep work for a 5.20 feature to avoid some inter-tree syncs, and a couple of late addition amdgpu uAPI changes but best to get those in early, and the userspace pieces are ready. msm: - Limiting WB modes to max sspp linewidth - Fixing the supported rotations to add 180 back for IGT - Fix to handle pm_runtime_get_sync() errors to avoid unclocked access in the bind() path for dpu driver - Fix the irq_free() without request issue which was a big-time hitter in the CI-runs. amdgpu: - Update fdinfo to the common drm format - uapi: - Add VM_NOALLOC GPUVM attribute to prevent buffers for going into the MALL - Add AMDGPU_GEM_CREATE_DISCARDABLE flag to create buffers that can be discarded on eviction - Mesa code which uses these: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16466 - Link training fixes - DPIA fixes - Misc code cleanups - Aux fixes - Hotplug fixes - More FP clean up - Misc GFX9/10 fixes - Fix a possible memory leak in SMU shutdown - SMU 13 updates - RAS fixes - TMZ fixes - GC 11 updates - SMU 11 metrics fixes - Fix coverage blend mode for overlay plane - Note DDR vs LPDDR memory - Fuzz fix for CS IOCTL - Add new PCI DID amdkfd: - Clean up hive setup - Misc fixes tegra: - add some prelim 5.20 work to avoid inter-tree mess" * tag 'drm-next-2022-06-03-1' of git://anongit.freedesktop.org/drm/drm: (57 commits) drm/msm/dpu: Move min BW request and full BW disable back to mdss drm/msm/dpu: Fix pointer dereferenced before checking drm/msm/dpu: Remove unused code drm/msm/disp/dpu1: remove superfluous init drm/msm/dp: Always clear mask bits to disable interrupts at dp_ctrl_reset_irq_ctrl() gpu: host1x: Add context bus drm/amdgpu: add drm-client-id to fdinfo v2 drm/amdgpu: Convert to common fdinfo format v5 drm/amdgpu: bump minor version number drm/amdgpu: add AMDGPU_VM_NOALLOC v2 drm/amdgpu: add AMDGPU_GEM_CREATE_DISCARDABLE drm/amdgpu: add beige goby PCI ID drm/amd/pm: Return auto perf level, if unsupported drm/amdkfd: fix typo in comment drm/amdgpu/gfx: fix typos in comments drm/amdgpu/cs: make commands with 0 chunks illegal behaviour. drm/amdgpu: differentiate between LP and non-LP DDR memory drm/amdgpu: Resolve pcie_bif RAS recovery bug drm/amdgpu: clean up asd on the ta_firmware_header_v2_0 drm/amdgpu/discovery: validate VCN and SDMA instances ...

Merge tag 'msm-next-5.19-fixes-06-01' of https://gitlab.freedesktop.org/abhinavk/msm into drm-next

2022-06-03T01:35:23Z

5.19 fixes for msm-next - Fix to add minimum ICC vote in the msm_mdss pm_resume path to address bootup splats - Fix to avoid dereferencing without checking in WB encoder - Fix to avoid crash during suspend in DP driver by ensuring interrupt mask bits are updated - Remove unused code from dpu_encoder_virt_atomic_check() - Fix to remove redundant init of dsc variable Signed-off-by: Dave Airlie From: Abhinav Kumar Link: https://patchwork.freedesktop.org/patch/msgid/927b201e-a734-a29d-b9fb-b9889e1f7795@quicinc.com

drm/msm/dpu: Move min BW request and full BW disable back to mdss

2022-06-01T23:16:19Z

In commit a670ff578f1f ("drm/msm/dpu: always use mdp device to scale bandwidth") we fully moved interconnect stuff to the DPU driver. This had no change for sc7180 but _did_ have an impact for other SoCs. It made them match the sc7180 scheme. Unfortunately, the sc7180 scheme seems like it was a bit broken. Specifically the interconnect needs to be on for more than just the DPU driver's AXI bus. In the very least it also needs to be on for the DSI driver's AXI bus. This can be seen fairly easily by doing this on a ChromeOS sc7180-trogdor class device: set_power_policy --ac_screen_dim_delay=5 --ac_screen_off_delay=10 sleep 10 cd /sys/bus/platform/devices/ae94000.dsi/power echo on > control When you do that, you'll get a warning splat in the logs about "gcc_disp_hf_axi_clk status stuck at 'off'". One could argue that perhaps what I have done above is "illegal" and that it can't happen naturally in the system because in normal system usage the DPU is pretty much always on when DSI is on. That being said: * In official ChromeOS builds (admittedly a 5.4 kernel with backports) we have seen that splat at bootup. * Even though we don't use "autosuspend" for these components, we don't use the "put_sync" variants. Thus plausibly the DSI could stay "runtime enabled" past when the DPU is enabled. Techncially we shouldn't do that if the DPU's suspend ends up yanking our clock. Let's change things such that the "bare minimum" request for the interconnect happens in the mdss driver again. That means that all of the children can assume that the interconnect is on at the minimum bandwidth. We'll then let the DPU request the higher amount that it wants. It should be noted that this isn't as hacky of a solution as it might initially appear. Specifically: * Since MDSS and DPU individually get their own references to the interconnect then the framework will actually handle aggregating them. The two drivers are _not_ clobbering each other. * When the Qualcomm interconnect driver aggregates it takes the max of all the peaks. Thus having MDSS request a peak, as we're doing here, won't actually change the total interconnect bandwidth (it won't be added to the request for the DPU). This perhaps explains why the "average" requested in MDSS was historically 0 since that one _would_ be added in. NOTE also that in the downstream ChromeOS 5.4 and 5.15 kernels, we're also seeing some RPMH hangs that are addressed by this fix. These hangs are showing up in the field and on _some_ devices with enough stress testing of suspend/resume. Specifically right at suspend time with a stack crawl that looks like this (from chromeos-5.15 tree): rpmh_write_batch+0x19c/0x240 qcom_icc_bcm_voter_commit+0x210/0x420 qcom_icc_set+0x28/0x38 apply_constraints+0x70/0xa4 icc_set_bw+0x150/0x24c dpu_runtime_resume+0x50/0x1c4 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x12c/0x20c __rpm_callback+0x98/0x138 rpm_callback+0x30/0x88 rpm_resume+0x370/0x4a0 __pm_runtime_resume+0x80/0xb0 dpu_kms_enable_commit+0x24/0x30 msm_atomic_commit_tail+0x12c/0x630 commit_tail+0xac/0x150 drm_atomic_helper_commit+0x114/0x11c drm_atomic_commit+0x68/0x78 drm_atomic_helper_disable_all+0x158/0x1c8 drm_atomic_helper_suspend+0xc0/0x1c0 drm_mode_config_helper_suspend+0x2c/0x60 msm_pm_prepare+0x2c/0x40 pm_generic_prepare+0x30/0x44 genpd_prepare+0x80/0xd0 device_prepare+0x78/0x17c dpm_prepare+0xb0/0x384 dpm_suspend_start+0x34/0xc0 We don't completely understand all the mechanisms in play, but the hang seemed to come and go with random factors. It's not terribly surprising that the hang is gone after this patch since the line of code that was failing is no longer present in the kernel. Fixes: a670ff578f1f ("drm/msm/dpu: always use mdp device to scale bandwidth") Fixes: c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display") Signed-off-by: Douglas Anderson Reviewed-by: Abhinav Kumar Tested-by: Jessica Zhang # RB3 (sdm845) and Reviewed-by: Stephen Boyd Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/487884/ Link: https://lore.kernel.org/r/20220531160059.v2.1.Ie7f6d4bf8cce28131da31a43354727e417cae98d@changeid Signed-off-by: Abhinav Kumar

drm/msm/dpu: Fix pointer dereferenced before checking

2022-06-01T23:16:05Z

The phys_enc->wb_idx is dereferencing before null checking, so move it after checking. Signed-off-by: Haowen Bai Reviewed-by: Dmitry Baryshkov Fixes: d7d0e73f7de33 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/487606/ Link: https://lore.kernel.org/r/1653877196-23114-1-git-send-email-baihaowen@meizu.com Signed-off-by: Abhinav Kumar

drm/msm/dpu: Remove unused code

2022-06-01T23:15:52Z

Eliminate the follow clang warning: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:544:33: warning: variable ‘mode’ set but not used [-Wunused-but-set-variable]. Reported-by: Abaci Robot Signed-off-by: Jiapeng Chong Fixes: 3177589c6e93("drm/msm/dpu: encoder: drop unused mode_fixup callback") Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/487136/ Link: https://lore.kernel.org/r/20220524081413.37895-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Abhinav Kumar

drm/msm/disp/dpu1: remove superfluous init

2022-06-01T23:15:21Z

Commit 58dca9810749 ("drm/msm/disp/dpu1: Add support for DSC in encoder") added dsc_common_mode variable which was set to zero but then again programmed, so drop the superfluous init. Fixes: 58dca9810749 ("drm/msm/disp/dpu1: Add support for DSC in encoder") Reported-by: kernel test robot Reviewed-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Signed-off-by: Vinod Koul Patchwork: https://patchwork.freedesktop.org/patch/487208/ Link: https://lore.kernel.org/r/20220525073912.2706505-1-vkoul@kernel.org Signed-off-by: Abhinav Kumar

drm/msm/dp: Always clear mask bits to disable interrupts at dp_ctrl_reset_irq_ctrl()

2022-06-01T23:15:05Z

dp_catalog_ctrl_reset() will software reset DP controller. But it will not reset programmable registers to default value. DP driver still have to clear mask bits to interrupt status registers to disable interrupts after software reset of controller. At current implementation, dp_ctrl_reset_irq_ctrl() will software reset dp controller but did not call dp_catalog_ctrl_enable_irq(false) to clear hpd related interrupt mask bits to disable hpd related interrupts due to it mistakenly think hpd related interrupt mask bits will be cleared by software reset of dp controller automatically. This mistake may cause system to crash during suspending procedure due to unexpected irq fired and trigger event thread to access dp controller registers with controller clocks are disabled. This patch fixes system crash during suspending problem by removing "enable" flag condition checking at dp_ctrl_reset_irq_ctrl() so that hpd related interrupt mask bits are cleared to prevent unexpected from happening. Changes in v2: -- add more details commit text Changes in v3: -- add synchrons_irq() -- add atomic_t suspended Changes in v4: -- correct Fixes's commit ID -- remove synchrons_irq() Changes in v5: -- revise commit text Changes in v6: -- add event_lock to protect "suspended" Changes in v7: -- delete "suspended" flag Fixes: 989ebe7bc446 ("drm/msm/dp: do not initialize phy until plugin interrupt received") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Patchwork: https://patchwork.freedesktop.org/patch/486591/ Link: https://lore.kernel.org/r/1652804494-19650-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Abhinav Kumar

Merge tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm

2022-05-25T23:18:27Z

Pull drm updates from Dave Airlie: "Intel have enabled DG2 on certain SKUs for laptops, AMD has started some new GPU support, msm has user allocated VA controls dma-buf: - add dma_resv_replace_fences - add dma_resv_get_singleton - make dma_excl_fence private core: - EDID parser refactorings - switch drivers to drm_mode_copy/duplicate - DRM managed mutex initialization display-helper: - put HDMI, SCDC, HDCP, DSC and DP into new module gem: - rework fence handling ttm: - rework bulk move handling - add common debugfs for resource managers - convert to kvcalloc format helpers: - support monochrome formats - RGB888, RGB565 to XRGB8888 conversions fbdev: - cfb/sys_imageblit fixes - pagelist corruption fix - create offb platform device - deferred io improvements sysfb: - Kconfig rework - support for VESA mode selection bridge: - conversions to devm_drm_of_get_bridge - conversions to panel_bridge - analogix_dp - autosuspend support - it66121 - audio support - tc358767 - DSI to DPI support - icn6211 - PLL/I2C fixes, DT property - adv7611 - enable DRM_BRIDGE_OP_HPD - anx7625 - fill ELD if no monitor - dw_hdmi - add audio support - lontium LT9211 support, i.MXMP LDB - it6505: Kconfig fix, DPCD set power fix - adv7511 - CEC support for ADV7535 panel: - ltk035c5444t, B133UAN01, NV3052C panel support - DataImage FG040346DSSWBG04 support - st7735r - DT bindings fix - ssd130x - fixes i915: - DG2 laptop PCI-IDs ("motherboard down") - Initial RPL-P PCI IDs - compute engine ABI - DG2 Tile4 support - DG2 CCS clear color compression support - DG2 render/media compression formats support - ATS-M platform info - RPL-S PCI IDs added - Bump ADL-P DMC version to v2.16 - Support static DRRS - Support multiple eDP/LVDS native mode refresh rates - DP HDR support for HSW+ - Lots of display refactoring + fixes - GuC hwconfig support and query - sysfs support for multi-tile - fdinfo per-client gpu utilisation - add geometry subslices query - fix prime mmap with LMEM - fix vm open count and remove vma refcounts - contiguous allocation fixes - steered register write support - small PCI BAR enablement - GuC error capture support - sunset igpu legacy mmap support for newer devices - GuC version 70.1.1 support amdgpu: - Initial SoC21 support - SMU 13.x enablement - SMU 13.0.4 support - ttm_eu cleanups - USB-C, GPUVM updates - TMZ fixes for RV - RAS support for VCN - PM sysfs code cleanup - DC FP rework - extend CG/PG flags to 64-bit - SI dpm lockdep fix - runtime PM fixes amdkfd: - RAS/SVM fixes - TLB flush fixes - CRIU GWS support - ignore bogus MEC signals more efficiently msm: - Fourcc modifier for tiled but not compressed layouts - Support for userspace allocated IOVA (GPU virtual address) - DPU: DSC (Display Stream Compression) support - DP: eDP support - DP: conversion to use drm_bridge and drm_bridge_connector - Merge DPU1 and MDP5 MDSS driver - DPU: writeback support nouveau: - make some structures static - make some variables static - switch to drm_gem_plane_helper_prepare_fb radeon: - misc fixes/cleanups mxsfb: - rework crtc mode setting - LCDIF CRC support etnaviv: - fencing improvements - fix address space collisions - cleanup MMU reference handling gma500: - GEM/GTT improvements - connector handling fixes komeda: - switch to plane reset helper mediatek: - MIPI DSI improvements omapdrm: - GEM improvements qxl: - aarch64 support vc4: - add a CL submission tracepoint - HDMI YUV support - HDMI/clock improvements - drop is_hdmi caching virtio: - remove restriction of non-zero blob types vmwgfx: - support for cursormob and cursorbypass 4 - fence improvements tidss: - reset DISPC on startup solomon: - SPI support - DT improvements sun4i: - allwinner D1 support - drop is_hdmi caching imx: - use swap() instead of open-coding - use devm_platform_ioremap_resource - remove redunant initializations ast: - Displayport support rockchip: - Refactor IOMMU initialisation - make some structures static - replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi - support swapped YUV formats, - clock improvements - rk3568 support - VOP2 support mediatek: - MT8186 support tegra: - debugabillity improvements" * tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm: (1740 commits) drm/i915/dsi: fix VBT send packet port selection for ICL+ drm/i915/uc: Fix undefined behavior due to shift overflowing the constant drm/i915/reg: fix undefined behavior due to shift overflowing the constant drm/i915/gt: Fix use of static in macro mismatch drm/i915/audio: fix audio code enable/disable pipe logging drm/i915: Fix CFI violation with show_dynamic_id() drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c drm/i915/gt: Fix build error without CONFIG_PM drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotations drm/msm: don't free the IRQ if it was not requested drm/msm/dpu: limit writeback modes according to max_linewidth drm/amd: Don't reset dGPUs if the system is going to s2idle drm/amdgpu: Unmap legacy queue when MES is enabled drm: msm: fix possible memory leak in mdp5_crtc_cursor_set() drm/msm: Fix fb plane offset calculation drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init drm/msm/dsi: don't powerup at modeset time for parade-ps8640 drm/rockchip: Change register space names in vop2 dt-bindings: display: rockchip: make reg-names mandatory for VOP2 ...

Merge tag 'msm-next-5.19-fixes' of https://gitlab.freedesktop.org/abhinavk/msm into drm-next

2022-05-20T06:35:52Z

5.19 fixes for msm-next - Limiting WB modes to max sspp linewidth - Fixing the supported rotations to add 180 back for IGT - Fix to handle pm_runtime_get_sync() errors to avoid unclocked access in the bind() path for dpu driver - Fix the irq_free() without request issue which was a big-time hitter in the CI-runs. Signed-off-by: Abhinav Kumar Signed-off-by: Dave Airlie From: Abhinav Kumar Link: https://patchwork.freedesktop.org/patch/msgid/b011d51d-d634-123e-bf5f-27219ee33151@quicinc.com

drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path

2022-05-19T01:32:03Z

If there are errors while trying to enable the pm in the bind path, it will lead to unclocked access of hw revision register thereby crashing the device. This will not address why the pm_runtime_get_sync() fails but at the very least we should be able to prevent the crash by handling the error and bailing out earlier. changes in v2: - use pm_runtime_resume_and_get() instead of pm_runtime_get_sync() Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Abhinav Kumar Reviewed-by: Rob Clark Reviewed-by: Stephen Boyd Patchwork: https://patchwork.freedesktop.org/patch/486721/ Link: https://lore.kernel.org/r/20220518223407.26147-1-quic_abhinavk@quicinc.com Signed-off-by: Abhinav Kumar