linux-dev/drivers/gpu/drm/solomon/Kconfig, branch master

drm/solomon: Add SSD130x OLED displays SPI support

2022-04-20T16:48:17Z

The ssd130x driver only provides the core support for these devices but it does not have any bus transport logic. Add a driver to interface over SPI. There is a difference in the communication protocol when using 4-wire SPI instead of I2C. For the latter, a control byte that contains a D/C# field has to be sent. This field tells the controller whether the data has to be written to the command register or to the graphics display data memory. But for 4-wire SPI that control byte is not used, instead a real D/C# line must be pulled HIGH for commands data and LOW for graphics display data. For this reason the standard SPI regmap can't be used and a custom .write bus handler is needed. Signed-off-by: Javier Martinez Canillas Acked-by: Mark Brown Reviewed-by: Geert Uytterhoeven Link: https://patchwork.freedesktop.org/patch/msgid/20220419214824.335075-6-javierm@redhat.com

drm/ssd130x: Add support for SINO WEALTH SH1106

2022-04-07T13:26:04Z

The SINO WEALTH SH1106 is an OLED display driver that is somewhat compatible with the SSD1306. It supports a slightly wider display, at 132 instead of 128 pixels. The basic commands are the same, but the SH1106 doesn't support the horizontal or vertical address modes. Add support for this display driver. The default values for some of the hardware settings are taken from the datasheet. Signed-off-by: Chen-Yu Tsai Acked-by: Javier Martinez Canillas Signed-off-by: Javier Martinez Canillas Link: https://patchwork.freedesktop.org/patch/msgid/20220406172956.3953-5-wens@kernel.org

drm/solomon: Make DRM_SSD130X depends on MMU

2022-03-16T14:54:42Z

WARNING: unmet direct dependencies detected for DRM_GEM_SHMEM_HELPER Depends on [n]: HAS_IOMEM [=y] && DRM [=m] && MMU [=n] Selected by [m]: - DRM_SSD130X [=m] && HAS_IOMEM [=y] && DRM [=m] DRM_GEM_SHMEM_HELPER depends on MMU, DRM_SSD130X should also depends on MMU. Fixes: a61732e80867 ("drm: Add driver for Solomon SSD130x OLED displays") Signed-off-by: YueHaibing Acked-by: Javier Martinez Canillas Signed-off-by: Javier Martinez Canillas Link: https://patchwork.freedesktop.org/patch/msgid/20220312063437.19160-1-yuehaibing@huawei.com

drm/solomon: Add SSD130x OLED displays I2C support

2022-02-16T12:29:04Z

The ssd130x driver only provides the core support for these devices but it does not have any bus transport logic. Add a driver to interface over I2C. Signed-off-by: Javier Martinez Canillas Reviewed-by: Andy Shevchenko Reviewed-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20220214133710.3278506-5-javierm@redhat.com

drm: Add driver for Solomon SSD130x OLED displays

2022-02-16T12:29:04Z

This adds a DRM driver for SSD1305, SSD1306, SSD1307 and SSD1309 Solomon OLED display controllers. It's only the core part of the driver and a bus specific driver is needed for each transport interface supported by the display controllers. Signed-off-by: Javier Martinez Canillas Reviewed-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20220214133710.3278506-4-javierm@redhat.com