linux-dev/drivers/gpu/drm/tegra/output.c, branch linus/master

drm/tegra: output: Do not put OF node twice

2020-11-13T20:38:35Z

The original patch for commit 3d2e7aec7013 ("drm/tegra: output: Don't leak OF node on error") contained this hunk, but it was accidentally dropped during conflict resolution. This causes use-after-free errors on devices that use an I2C controller for HDMI DDC/CI on Tegra210 and later. Fixes: 3d2e7aec7013 ("drm/tegra: output: Don't leak OF node on error") Signed-off-by: Thierry Reding

Merge tag 'drm/tegra/for-5.10-rc1' of ssh://git.freedesktop.org/git/tegra/linux into drm-next

2020-09-22T22:37:12Z

drm/tegra: Changes for v5.10-rc1 This is a handful of patches that add bridge support for Tegra devices and fix a couple of minor issues. Signed-off-by: Dave Airlie From: Thierry Reding Link: https://patchwork.freedesktop.org/patch/msgid/20200921121245.3953659-1-thierry.reding@gmail.com

drm/tegra: output: Support DRM bridges

2020-09-17T10:30:11Z

Newer Tegra device-trees will specify a video output graph which involves a bridge. This patch adds initial support for the DRM bridges to the Tegra DRM output. Acked-by: Sam Ravnborg Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding

drm/tegra: output: Don't leak OF node on error

2020-09-17T10:29:39Z

The OF node should be put before returning error in tegra_output_probe(), otherwise node's refcount will be leaked. Reviewed-by: Laurent Pinchart Reviewed-by: Sam Ravnborg Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding

drm/tegra: Properly reference count the DDC I2C adapter

2020-09-17T10:27:11Z

Use the of_get_i2c_adapter_by_node(), which is similar to the existing call to of_find_i2c_adapter_by_node() except that it also takes a reference to the owner module of the I2C adapter. In order to properly balance this out, call i2c_put_adapter() to release the reference to the I2C adapter and its owner module. For the special case where the DDC comes from the DPAUX, care must be taken to perform the same steps (i.e. get_device() and module_get()) so that the reference counts are all balanced. Signed-off-by: Thierry Reding

drm: Remove unnecessary drm_panel_attach and drm_panel_detach

2020-08-08T07:06:33Z

These functions are now empty and no longer useful so remove the functions and their uses. Signed-off-by: Joe Perches Cc: Bernard Zhao Cc: Maarten Lankhorst Cc: Maxime Ripard , Cc: Thomas Zimmermann Cc: Thierry Reding Cc: David Airlie Cc: Daniel Vetter Cc: Linus Walleij Cc: Icenowy Zheng , Cc: Jagan Teki Cc: Laurent Pinchart Cc: Robert Chiras Cc: dri-devel@lists.freedesktop.org, Cc: linux-kernel@vger.kernel.org Cc: opensource.kernel@vivo.com Signed-off-by: Sam Ravnborg # Fixed build and a few warnings Link: https://patchwork.freedesktop.org/patch/msgid/9e13761020750b1ce2f1fabee23ef6e2a2942882.camel@perches.com

drm/tegra: Use simple encoder

2020-04-02T12:16:45Z

The tegra driver uses empty implementations for its encoders. Replace the code with the generic simple encoder. Signed-off-by: Thomas Zimmermann Reviewed-by: Laurent Pinchart Acked-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-16-tzimmermann@suse.de

Merge tag 'drm/tegra/for-5.6-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

2020-01-15T06:21:28Z

drm/tegra: Changes for v5.6-rc1 This contains a small set of mostly fixes and some minor improvements. Signed-off-by: Dave Airlie From: Thierry Reding Link: https://patchwork.freedesktop.org/patch/msgid/20200111004835.2412858-1-thierry.reding@gmail.com

drm/tegra: output: Implement system suspend/resume

2020-01-10T15:46:29Z

Implement generic system suspend/resume functions that can be used with any output type. Currently this only implements disabling and enabling of the IRQ functionality across system suspend/resume. This prevents an interrupt from happening before the display driver has fully resumed. Signed-off-by: Thierry Reding

Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2019-12-17T12:57:54Z

drm-misc-next for v5.6: UAPI Changes: - Add support for DMA-BUF HEAPS. Cross-subsystem Changes: - mipi dsi definition updates, pulled into drm-intel as well. - Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim. - Remove support for dma-buf kmap/kunmap. - Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well. Core Changes: - Small cleanups to ttm. - Fix SCDC definition. - Assorted cleanups to core. - Add todo to remove load/unload hooks, and use generic fbdev emulation. - Assorted documentation updates. - Use blocking ww lock in ttm fault handler. - Remove drm_fb_helper_fbdev_setup/teardown. - Warning fixes with W=1 for atomic. - Use drm_debug_enabled() instead of drm_debug flag testing in various drivers. - Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted) - Various kconfig indentation fixes in core and drivers. - Fix freeing transactions in dp-mst correctly. - Sean Paul is steping down as core maintainer. :-( - Add lockdep annotations for atomic locks vs dma-resv. - Prevent use-after-free for a bad job in drm_scheduler. - Fill out all block sizes in the P01x and P210 definitions. - Avoid division by zero in drm/rect, and fix bounds. - Add drm/rect selftests. - Add aspect ratio and alternate clocks for HDMI 4k modes. - Add todo for drm_framebuffer_funcs and fb_create cleanup. - Drop DRM_AUTH for prime import/export ioctls. - Clear DP-MST payload id tables downstream when initializating. - Fix for DSC throughput definition. - Add extra FEC definitions. - Fix fake offset in drm_gem_object_funs.mmap. - Stop using encoder->bridge in core directly - Handle bridge chaining slightly better. - Add backlight support to drm/panel, and use it in many panel drivers. - Increase max number of y420 modes from 128 to 256, as preparation to add the new modes. Driver Changes: - Small fixes all over. - Fix documentation in vkms. - Fix mmap_sem vs dma_resv in nouveau. - Small cleanup in komeda. - Add page flip support in gma500 for psb/cdv. - Add ddc symlink in the connector sysfs directory for many drivers. - Add support for analogic an6345, and fix small bugs in it. - Add atomic modesetting support to ast. - Fix radeon fault handler VMA race. - Switch udl to use generic shmem helpers. - Unconditional vblank handling for mcde. - Miscellaneous fixes to mcde. - Tweak debug output from komeda using debugfs. - Add gamma and color transform support to komeda for DOU-IPS. - Add support for sony acx424AKP panel. - Various small cleanups to gma500. - Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation. - Add support for Logic PD Type 28 panel. - Use drm_panel_* wrapper functions in exynos/tegra/msm. - Add devicetree bindings for generic DSI panels. - Don't include drm_pci.h directly in many drivers. - Add support for begin/end_cpu_access in udmabuf. - Stop using drm_get_pci_dev in gma500 and mga200. - Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access. - Add devfreq thermal support to panfrost. - Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager. - meson: Add support for OSD1 plane AFBC commit. - Stop displaying garbage when toggling ast primary plane on/off. - More cleanups and fixes to UDL. - Add D32 suport to komeda. - Remove globle copy of drm_dev in gma500. - Add support for Boe Himax8279d MIPI-DSI LCD panel. - Add support for ingenic JZ4770 panel. - Small null pointer deference fix in ingenic. - Remove support for the special tfp420 driver, as there is a generic way to do it. Signed-off-by: Daniel Vetter From: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com