linux-dev/drivers/hwmon/Kconfig, branch master

Merge tag 'mfd-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2022-10-07T18:24:20Z

Pull MFD updates from Lee Jones: "Core Frameworks: - Fix 'mfd_of_node_list' OF node entry resource leak New Drivers: - Add support for Ocelot VSC7512 Networking Chip - Add support for MediaTek MT6370 subPMIC - Add support for Richtek RT5120 (I2C) PMIC New Device Support: - Add support for Rockchip RV1126 and RK3588 to Syscon - Add support for Rockchip RK817 Battery Charger to RK808 - Add support for Silergy SY7636a Voltage Regulator to Simple MFD - Add support for Qualcomm PMP8074 PMIC to QCOM SPMI - Add support for Secure Update to Intel M10 BMC New Functionality: - Provide SSP type to Intel's LPSS (PCI) SPI driver Fix-ups: - Remove legacy / unused code; stmpe, intel_soc_pmic_crc, syscon - Unify / simplify; intel_soc_pmic_crc - Trivial reordering / spelling, etc; Makefile, twl-core - Convert to managed resources; intel_soc_pmic_crc - Use appropriate APIs; intel_soc_pmic_crc - strscpy() conversion; htc-i2cpld, lpc_ich, mfd-core - GPIOD conversion; htc-i2cpld, stmpe - Add missing header file includes; twl4030-irq - DT goodies; stmpe, mediatek,mt6370, x-powers,axp152, aspeed,ast2x00-scu, mediatek,mt8195-scpsys, qcom,spmi-pmic, syscon, qcom,tcsr, rockchip,rk817, sprd,ums512-glbreg, dlg,da9063 Bug Fixes: - Properly check return values; sm501, htc-i2cpld - Repair Two-Wire Bus Mode; da9062-core - Fix error handling; intel_soc_pmic_core, fsl-imx25-tsadc, lp8788, lp8788-irq" * tag 'mfd-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits) mfd: syscon: Remove repetition of the regmap_get_val_endian() mfd: ocelot-spi: Add missing MODULE_DEVICE_TABLE power: supply: Add charger driver for Rockchip RK817 dt-bindings: mfd: mt6370: Fix the indentation in the example mfd: da9061: Fix Failed to set Two-Wire Bus Mode. mfd: htc-i2cpld: Fix an IS_ERR() vs NULL bug in htcpld_core_probe() dt-bindings: mfd: qcom,tcsr: Drop simple-mfd from IPQ6018 mfd: sm501: Add check for platform_driver_register() dt-bindings: mfd: mediatek: Add scpsys compatible for mt8186 mfd: twl4030: Add missed linux/device.h header dt-bindings: mfd: dlg,da9063: Add missing regulator patterns dt-bindings: mfd: sprd: Add bindings for ums512 global registers mfd: intel_soc_pmic_chtdc_ti: Switch from __maybe_unused to pm_sleep_ptr() etc dt-bindings: mfd: syscon: Add rk3588 QoS register compatible mfd: stmpe: Switch to using gpiod API mfd: qcom-spmi-pmic: Add pm7250b compatible dt-bindings: mfd: Add missing (unevaluated|additional)Properties on child nodes mfd/omap1: htc-i2cpld: Convert to a pure GPIO driver mfd: intel-m10-bmc: Add d5005 bmc secure update driver dt-bindings: mfd: syscon: Drop ref from reg-io-width ...

mfd: silergy,sy7636a: Add config option MFD_SY7636A

2022-09-28T15:09:50Z

Add a specific MFD_SY7636A config option. As part of this change we can use MFD_SY7636A as a dependency for all SY7636a components and also remove the name from MFD_SIMPLE_MFD_I2C as it no longer needs to be selectable. Signed-off-by: Alistair Francis Reviewed-by: Guenter Roeck Acked-by: Mark Brown Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20220525115554.430971-2-alistair@alistair23.me

drivers: hwmon: Add max31760 fan speed controller driver

2022-09-20T14:10:58Z

MAX31760 is a precision fan speed controller with nonvolatile lookup table. Device has one internal and one external temperature sensor support. Controls two fans and measures their speeds. Generates hardware alerts when programmable max and critical temperatures are exceeded. Signed-off-by: Ibrahim Tilki Reviewed-by: Nurettin Bolucu Link: https://lore.kernel.org/r/20220910171945.48088-2-Ibrahim.Tilki@analog.com Signed-off-by: Guenter Roeck

hwmon: (aspeed-pwm-tacho) Add dependency on ARCH_ASPEED

2022-09-19T13:17:07Z

The SENSORS_ASPEED is part of the Aspeed silicon so it makes sense to depend on ARCH_ASPEED and for compile testing. Signed-off-by: Peter Robinson Link: https://lore.kernel.org/r/20220916120936.372591-1-pbrobinson@gmail.com Signed-off-by: Guenter Roeck

hwmon: (aquacomputer_d5next) Add support for Aquacomputer High Flow Next

2022-09-19T13:17:06Z

Extend aquacomputer_d5next driver to expose various hardware sensors of the Aquacomputer High Flow Next flow sensor, which communicates through a proprietary USB HID protocol. The High Flow Next exposes +5V voltages, water quality, conductivity and flow readings. A temperature sensor can be connected to it, in which case it provides its reading and an estimation of the dissipated/absorbed power in the liquid cooling loop. Additionally, serial number and firmware version are exposed through debugfs. Registry offsets were discovered and tested by users on Github [1] [2]. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/issues/8 [2] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/34 Signed-off-by: Aleksa Savic Link: https://lore.kernel.org/r/20220907100739.806571-1-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck

hwmon: (emc2305) add support for EMC2301/2/3/5 RPM-based PWM Fan Speed Controller.

2022-09-19T13:17:06Z

Add driver for Microchip EMC2301/2/3/5 RPM-based PWM Fan Speed Controller. Modify Makefile and Kconfig to support Microchip EMC2305 RPM-based PWM Fan Speed Controller. Signed-off-by: Michael Shych Reviewed-by: Vadim Pasternak Link: https://lore.kernel.org/r/20220810171552.56417-3-michaelsh@nvidia.com [groeck: Drop unnecessary () around DIV_ROUND_CLOSEST()] Signed-off-by: Guenter Roeck

hwmon: (asus_wmi_ec_sensors) remove driver

2022-09-19T13:17:05Z

This driver utilises a WMI interface found in AMD 500 series ASUS boards, to read EC registers. But it turned out that ASUS abandoned the interface, as it disappeared from Intel 600 series boards. Additionally, the WMI interface was incredibly slow. Therefore this driver was deprecated in favor of the asus_ec_sensors driver, which supports more boards, more sensors, and is faster. Signed-off-by: Eugene Shalygin Link: https://lore.kernel.org/r/20220720072016.102086-2-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck

hwmon: (aquacomputer_d5next) Add support for Aquacomputer Quadro fan controller

2022-07-27T13:00:24Z

Extend aquacomputer_d5next driver to expose hardware temperature sensors and fans of the Aquacomputer Quadro fan controller, which communicates through a proprietary USB HID protocol. Implemented by Jack Doan [1]. Four temperature sensors and PWM controllable fans are available. The liquid flow sensor is also exposed, implemented by Leonard Anderweit [2]. Additionally, serial number, firmware version and power-on count are exposed through debugfs. This driver has been tested on x86_64. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/5 [2] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/9 Originally-from: Jack Doan Originally-from: Leonard Anderweit Signed-off-by: Aleksa Savic Link: https://lore.kernel.org/r/20220727100606.9328-1-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck

hwmon: Allow to compile ASB100 and FSCHMD on !X86

2022-07-13T15:38:19Z

The two drivers compile just fine on ARCH=arm. Allow to select these drivers if COMPILE_TEST is enabled. Signed-off-by: Uwe Kleine-König Reviewed-by: Jean Delvare Link: https://lore.kernel.org/r/20220527153445.1871086-1-u.kleine-koenig@pengutronix.de Signed-off-by: Guenter Roeck

hwmon: (lm90) Add support and detection of Philips/NXP NE1618

2022-07-13T15:38:19Z

NE1618 is similar to NE1617 but supports manufacturer and chip ID registers as well as 11 bit external temperature resolution. Signed-off-by: Guenter Roeck