linux-dev/drivers/hwmon/pmbus/Makefile, branch master

hwmon: (pmbus) Add driver for the TEXAS TPS546D24 Buck Converter.

2022-09-25T21:21:52Z

Add the pmbus driver for TEXAS tps546d24 Buck Converter. The vout mode of tps546d24 supported relative data format, which is not supported by the PMBus core. Signed-off-by: Duke Du Link: https://lore.kernel.org/r/1662951668-9849-1-git-send-email-Duke.Du@quantatw.com [groeck: Add __maybe_unused to tps546d24_of_match declaration] Signed-off-by: Guenter Roeck

hwmon: (pmbus) Add support for Analog Devices LT7182S

2022-07-13T15:38:19Z

Add support for Analog Devices LT7182S Dual Channel 6A, 20V PolyPhase Step-Down Silent Switcher with Digital Power System Management. Signed-off-by: Guenter Roeck

hwmon: (pmbus) Add support for Infineon Digital Multi-phase xdp152 family controllers

2022-05-22T18:32:20Z

Add support for devices XDPE152C4, XDPE12584. Signed-off-by: Greg Schwendimann Link: https://lore.kernel.org/r/5e6d50e9b28140158f339b0de343eea4@infineon.com Signed-off-by: Guenter Roeck

hwmon: (pmbus) Add support for pli1209bc

2022-02-28T01:03:19Z

PLI1209BC is a Digital Supervisor from Vicor Corporation. Signed-off-by: Marcello Sylvester Bauer Link: https://lore.kernel.org/r/4e016e66275bc46c90974aec18b150c874e64787.1645435888.git.sylv@sylv.io Signed-off-by: Guenter Roeck

hwmon: (pmbus) Add support for MPS Multi-phase mp5023

2021-12-26T23:02:06Z

Add support for mp5023 device from Monolithic Power Systems, Inc. (MPS) vendor. This is a Hot-Swap Controller. Signed-off-by: Howard Chiu Link: https://lore.kernel.org/r/HKAPR04MB400349AA406694FB976D78D096709@HKAPR04MB4003.apcprd04.prod.outlook.com [groeck: Added MODULE_IMPORT_NS, entry in index.rst] Signed-off-by: Guenter Roeck

hwmon: (pmbus) Add Delta AHE-50DC fan control module driver

2021-12-26T23:02:06Z

This device is an integrated module of the Delta AHE-50DC Open19 power shelf. I haven't been able to procure any proper documentation for it, but it seems to be a (somewhat minimally) PMBus-compliant device. It provides four fan speeds, four temperatures (three standard and one manufacturer-specific via a virtual second page), and a vin reading. Signed-off-by: Zev Weiss Link: https://lore.kernel.org/r/20211208213703.2577-2-zev@bewilderbeest.net Signed-off-by: Guenter Roeck

hwmon: (pmbus) Add driver for Delta DPS-920AB PSU

2021-06-17T11:21:46Z

This adds support for the Delta DPS-920AB PSU. Only missing feature is fan control which the PSU supports. Signed-off-by: Robert Marko Link: https://lore.kernel.org/r/20210607103431.2039073-1-robert.marko@sartura.hr [groeck: Add MODULE_IMPORT_NS(PMBUS);] Signed-off-by: Guenter Roeck

hwmon: (pmbus/pim4328) Add PMBus driver for PIM4006, PIM4328 and PIM4820

2021-06-17T11:21:46Z

Add hardware monitoring support for Flex power interface modules PIM4006, PIM4328 and PIM4820. Signed-off-by: Erik Rosen Signed-off-by: Guenter Roeck

hwmon: (pmbus) Add support for MPS Multi-phase mp2888 controller

2021-06-17T11:21:45Z

Add support for mp2888 device from Monolithic Power Systems, Inc. (MPS) vendor. This is a digital, multi-phase, pulse-width modulation controller. This device supports: - One power rail. - Programmable Multi-Phase up to 10 Phases. - PWM-VID Interface - One pages 0 for telemetry. - Programmable pins for PMBus Address. - Built-In EEPROM to Store Custom Configurations. - Can configured VOUT readout in direct or VID format and allows setting of different formats on rails 1 and 2. For VID the following protocols are available: VR13 mode with 5-mV DAC; VR13 mode with 10-mV DAC, IMVP9 mode with 5-mV DAC. Signed-off-by: Vadim Pasternak Reported-by: kernel test robot Link: https://lore.kernel.org/r/20210511055619.118104-3-vadimp@nvidia.com [groeck: Add MODULE_IMPORT_NS] Signed-off-by: Guenter Roeck

hwmon: (pmbus) Add pmbus driver for MAX15301

2021-04-20T13:50:14Z

Add pmbus driver support for Maxim MAX15301 InTune Automatically Compensated Digital PoL Controller with Driver and PMBus Telemetry Even though the specification does not specifically mention it, extensive empirical testing has revealed that auto-detection of limit-registers will fail in a random fashion unless the delay parameter is set to above about 80us. The default delay is set to 100us to include some safety margin. This patch is tested on a Flex BMR461 converter module. Signed-off-by: Erik Rosen Link: https://lore.kernel.org/r/20210419101251.24840-1-erik.rosen@metormote.com [groeck: Added rationale for delay to driver header] Signed-off-by: Guenter Roeck