linux-dev/drivers/hwmon, branch master

Revert "hwmon: (pmbus) Add regulator supply into macro"

2022-11-04T23:47:01Z

This reverts commit 54cc3dbfc10dc3db7cb1cf49aee4477a8398fbde. Zev Weiss reports that the reverted patch may cause a regulator undercount. Here is his report: ... having regulator-dummy set as a supply on my PMBus regulators (instead of having them as their own top-level regulators without an upstream supply) leads to enable-count underflow errors when disabling them: # echo 0 > /sys/bus/platform/devices/efuse01/state [ 906.094477] regulator-dummy: Underflow of regulator enable count [ 906.100563] Failed to disable vout: -EINVAL [ 136.992676] reg-userspace-consumer efuse01: Failed to configure state: -22 Zev reports that reverting the patch fixes the problem. So let's do that for now. Fixes: 54cc3dbfc10d ("hwmon: (pmbus) Add regulator supply into macro") Cc: Marcello Sylvester Bauer Reported-by: Zev Weiss Signed-off-by: Guenter Roeck

hwmon: (scmi) Register explicitly with Thermal Framework

2022-11-04T23:47:01Z

Available sensors are enumerated and reported by the SCMI platform server using a 16bit identification number; not all such sensors are of a type supported by hwmon subsystem and, among the supported ones, only a subset could be temperature sensors that have to be registered with the Thermal Framework. Potential clashes between hwmon channels indexes and the underlying real sensors IDs do not play well with the hwmon<-->thermal bridge automatic registration routines and could need a sensible number of fake dummy sensors to be made up in order to keep indexes and IDs in sync. Avoid to use the hwmon<-->thermal bridge dropping the HWMON_C_REGISTER_TZ attribute and instead explicit register temperature sensors directly with the Thermal Framework. Cc: Daniel Lezcano Cc: Guenter Roeck Cc: linux-hwmon@vger.kernel.org Signed-off-by: Cristian Marussi Acked-by: Sudeep Holla Link: https://lore.kernel.org/r/20221031114018.59048-1-cristian.marussi@arm.com Signed-off-by: Guenter Roeck

Merge tag 'x86_urgent_for_v6.0_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2022-10-23T17:01:34Z

Pull x86 fixes from Borislav Petkov: "As usually the case, right after a major release, the tip urgent branches accumulate a couple more fixes than normal. And here is the x86, a bit bigger, urgent pile. - Use the correct CPU capability clearing function on the error path in Intel perf LBR - A CFI fix to ftrace along with a simplification - Adjust handling of zero capacity bit mask for resctrl cache allocation on AMD - A fix to the AMD microcode loader to attempt patch application on every logical thread - A couple of topology fixes to handle CPUID leaf 0x1f enumeration info properly - Drop a -mabi=ms compiler option check as both compilers support it now anyway - A couple of fixes to how the initial, statically allocated FPU buffer state is setup and its interaction with dynamic states at runtime" * tag 'x86_urgent_for_v6.0_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly perf/x86/intel/lbr: Use setup_clear_cpu_cap() instead of clear_cpu_cap() ftrace,kcfi: Separate ftrace_stub() and ftrace_stub_graph() x86/ftrace: Remove ftrace_epilogue() x86/resctrl: Fix min_cbm_bits for AMD x86/microcode/AMD: Apply the patch early on every logical thread x86/topology: Fix duplicated core ID within a package x86/topology: Fix multiple packages shown on a single-package system hwmon/coretemp: Handle large core ID value x86/Kconfig: Drop check for -mabi=ms for CONFIG_EFI_STUB x86/fpu: Exclude dynamic states from init_fpstate x86/fpu: Fix the init_fpstate size check with the actual size x86/fpu: Configure init_fpstate attributes orderly

hwmon: (corsair-psu) Add USB id of the new HX1500i psu

2022-10-22T13:59:12Z

Also update the documentation accordingly. Signed-off-by: Wilken Gottwalt Link: https://lore.kernel.org/r/Y0FghqQCHG/cX5Jz@monster.localdomain Signed-off-by: Guenter Roeck

hwmon/coretemp: Handle large core ID value

2022-10-17T18:58:52Z

The coretemp driver supports up to a hard-coded limit of 128 cores. Today, the driver can not support a core with an ID above that limit. Yet, the encoding of core ID's is arbitrary (BIOS APIC-ID) and so they may be sparse and they may be large. Update the driver to map arbitrary core ID numbers into appropriate array indexes so that 128 cores can be supported, no matter the encoding of core ID's. Signed-off-by: Zhang Rui Signed-off-by: Dave Hansen Acked-by: Len Brown Acked-by: Guenter Roeck Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20221014090147.1836-3-rui.zhang@intel.com

hwmon: (pwm-fan) Explicitly switch off fan power when setting pwm1_enable to 0

2022-10-16T22:52:59Z

When pwm1_enable is changed from 1 to 0 while pwm1 == 0, the regulator is not switched off as expected. The reason is that when the fan is already off, ctx->enabled is false, so pwm_fan_power_off() will be a no-op. Handle this case explicitly in pwm_fan_update_enable() by calling pwm_fan_switch_power() directly. Fixes: b99152d4f04b ("hwmon: (pwm-fan) Switch regulator dynamically") Signed-off-by: Matthias Schiffer Link: https://lore.kernel.org/r/20221013135951.4902-1-matthias.schiffer@ew.tq-group.com Signed-off-by: Guenter Roeck

hwmon: (corsair-psu) fix typo in USB id description

2022-10-16T22:52:59Z

Fix spelling mistake (Corsaur -> Corsair). Fixes: 0cf46a653bda ("hwmon: (corsair-psu) add USB id of new revision of the HX1000i psu") Signed-off-by: Wilken Gottwalt Link: https://lore.kernel.org/r/Yzql13NOvQLlrye1@monster.localdomain Signed-off-by: Guenter Roeck

Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2022-10-08T15:56:37Z

Pull char/misc and other driver updates from Greg KH: "Here is the large set of char/misc and other small driver subsystem changes for 6.1-rc1. Loads of different things in here: - IIO driver updates, additions, and changes. Probably the largest part of the diffstat - habanalabs driver update with support for new hardware and features, the second largest part of the diff. - fpga subsystem driver updates and additions - mhi subsystem updates - Coresight driver updates - gnss subsystem updates - extcon driver updates - icc subsystem updates - fsi subsystem updates - nvmem subsystem and driver updates - misc driver updates - speakup driver additions for new features - lots of tiny driver updates and cleanups All of these have been in the linux-next tree for a while with no reported issues" * tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits) w1: Split memcpy() of struct cn_msg flexible array spmi: pmic-arb: increase SPMI transaction timeout delay spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes spmi: pmic-arb: correct duplicate APID to PPID mapping logic spmi: pmic-arb: add support to dispatch interrupt based on IRQ status spmi: pmic-arb: check apid against limits before calling irq handler spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq spmi: pmic-arb: handle spurious interrupt spmi: pmic-arb: add a print in cleanup_irq drivers: spmi: Directly use ida_alloc()/free() MAINTAINERS: add TI ECAP driver info counter: ti-ecap-capture: capture driver support for ECAP Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items dt-bindings: counter: add ti,am62-ecap-capture.yaml counter: Introduce the COUNTER_COMP_ARRAY component type counter: Consolidate Counter extension sysfs attribute creation counter: Introduce the Count capture component counter: 104-quad-8: Add Signal polarity component counter: Introduce the Signal polarity component counter: interrupt-cnt: Implement watch_validate callback ...

Merge tag 'mfd-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2022-10-07T18:24:20Z

Pull MFD updates from Lee Jones: "Core Frameworks: - Fix 'mfd_of_node_list' OF node entry resource leak New Drivers: - Add support for Ocelot VSC7512 Networking Chip - Add support for MediaTek MT6370 subPMIC - Add support for Richtek RT5120 (I2C) PMIC New Device Support: - Add support for Rockchip RV1126 and RK3588 to Syscon - Add support for Rockchip RK817 Battery Charger to RK808 - Add support for Silergy SY7636a Voltage Regulator to Simple MFD - Add support for Qualcomm PMP8074 PMIC to QCOM SPMI - Add support for Secure Update to Intel M10 BMC New Functionality: - Provide SSP type to Intel's LPSS (PCI) SPI driver Fix-ups: - Remove legacy / unused code; stmpe, intel_soc_pmic_crc, syscon - Unify / simplify; intel_soc_pmic_crc - Trivial reordering / spelling, etc; Makefile, twl-core - Convert to managed resources; intel_soc_pmic_crc - Use appropriate APIs; intel_soc_pmic_crc - strscpy() conversion; htc-i2cpld, lpc_ich, mfd-core - GPIOD conversion; htc-i2cpld, stmpe - Add missing header file includes; twl4030-irq - DT goodies; stmpe, mediatek,mt6370, x-powers,axp152, aspeed,ast2x00-scu, mediatek,mt8195-scpsys, qcom,spmi-pmic, syscon, qcom,tcsr, rockchip,rk817, sprd,ums512-glbreg, dlg,da9063 Bug Fixes: - Properly check return values; sm501, htc-i2cpld - Repair Two-Wire Bus Mode; da9062-core - Fix error handling; intel_soc_pmic_core, fsl-imx25-tsadc, lp8788, lp8788-irq" * tag 'mfd-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits) mfd: syscon: Remove repetition of the regmap_get_val_endian() mfd: ocelot-spi: Add missing MODULE_DEVICE_TABLE power: supply: Add charger driver for Rockchip RK817 dt-bindings: mfd: mt6370: Fix the indentation in the example mfd: da9061: Fix Failed to set Two-Wire Bus Mode. mfd: htc-i2cpld: Fix an IS_ERR() vs NULL bug in htcpld_core_probe() dt-bindings: mfd: qcom,tcsr: Drop simple-mfd from IPQ6018 mfd: sm501: Add check for platform_driver_register() dt-bindings: mfd: mediatek: Add scpsys compatible for mt8186 mfd: twl4030: Add missed linux/device.h header dt-bindings: mfd: dlg,da9063: Add missing regulator patterns dt-bindings: mfd: sprd: Add bindings for ums512 global registers mfd: intel_soc_pmic_chtdc_ti: Switch from __maybe_unused to pm_sleep_ptr() etc dt-bindings: mfd: syscon: Add rk3588 QoS register compatible mfd: stmpe: Switch to using gpiod API mfd: qcom-spmi-pmic: Add pm7250b compatible dt-bindings: mfd: Add missing (unevaluated|additional)Properties on child nodes mfd/omap1: htc-i2cpld: Convert to a pure GPIO driver mfd: intel-m10-bmc: Add d5005 bmc secure update driver dt-bindings: mfd: syscon: Drop ref from reg-io-width ...

Merge tag 'hwmon-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

2022-10-05T02:02:54Z

Pull hwmon updates from Guenter Roeck: "New drivers: - Driver for MAX31760 fan speed controller - Driver for TEXAS TPS546D24 Buck Converter - Driver for EMC2301/2/3/5 RPM-based PWM Fan Speed Controller Removed drivers: - Drop obsolete asus_wmi_ec_sensors driver Cleanups, affecting various drivers: - Use DEFINE_SIMPLE_DEV_PM_OPS where appropriate - Remove forward declarations - Move from strlcpy with unused retval to strscpy - Make use of devm_clk_get_enabled() - Drop devm_of_pwm_get() Other notable cleanup and improvements: - Support for additional USB devide ID and support for reporting of rail mode via debugfs added to corsair-psu driver - Support for aditional USB ID in nzxt-smart2 driver - Support for Aquacomputer High Flow Next in aquacomputer_d5next driver - Major cleanup of pwm-fan driver - Major cleanup of mr75203 driver, and added support for new device revision And various other minor fixes and cleanups" * tag 'hwmon-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (86 commits) hwmon: (corsair-psu) add USB id of new revision of the HX1000i psu hwmon: (pmbus/mp2888) Fix sensors readouts for MPS Multi-phase mp2888 controller dt-bindings: hwmon: sensirion,shtc1: Clean up spelling mistakes and grammar hwmon: (nct6683) remove unused variable in nct6683_create_attr_group hwmon: w83627hf: Reorder symbols to get rid of a few forward declarations hwmon: (ina3221) Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() hwmon: (w83627ehf) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() hwmon: (tmp108) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() hwmon: (tmp103) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() hwmon: (tmp102) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() hwmon: (pwm-fan) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() hwmon: (nct6775) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() hwmon: (max6639) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() hwmon: (max31730) witch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() hwmon: (max31722) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() hwmon: (ltc2947) Switch to EXPORT_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() hwmon: (lm90) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() hwmon: (it87) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() hwmon: (gpio-fan) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() hwmon: (adt7x10) Switch to EXPORT_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() ...