linux-dev/drivers/i2c/busses/i2c-tiny-usb.c, branch linus/master

i2c: tiny-usb: Correct I2C fault codes.

2020-01-06T14:40:43Z

This patch changes the I2C fault codes according to the specified values in Documentation/i2c/fault-codes. Signed-off-by: Christoph Müllner Signed-off-by: Wolfram Sang

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 372

2019-06-05T15:37:10Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 135 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531081036.435762997@linutronix.de Signed-off-by: Greg Kroah-Hartman

i2c: i2c-tiny-usb: fix buffer not being DMA capable

2017-05-22T08:33:42Z

Since v4.9 i2c-tiny-usb generates the below call trace and longer works, since it can't communicate with the USB device. The reason is, that since v4.9 the USB stack checks, that the buffer it should transfer is DMA capable. This was a requirement since v2.2 days, but it usually worked nevertheless. [ 17.504959] ------------[ cut here ]------------ [ 17.505488] WARNING: CPU: 0 PID: 93 at drivers/usb/core/hcd.c:1587 usb_hcd_map_urb_for_dma+0x37c/0x570 [ 17.506545] transfer buffer not dma capable [ 17.507022] Modules linked in: [ 17.507370] CPU: 0 PID: 93 Comm: i2cdetect Not tainted 4.11.0-rc8+ #10 [ 17.508103] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 17.509039] Call Trace: [ 17.509320] ? dump_stack+0x5c/0x78 [ 17.509714] ? __warn+0xbe/0xe0 [ 17.510073] ? warn_slowpath_fmt+0x5a/0x80 [ 17.510532] ? nommu_map_sg+0xb0/0xb0 [ 17.510949] ? usb_hcd_map_urb_for_dma+0x37c/0x570 [ 17.511482] ? usb_hcd_submit_urb+0x336/0xab0 [ 17.511976] ? wait_for_completion_timeout+0x12f/0x1a0 [ 17.512549] ? wait_for_completion_timeout+0x65/0x1a0 [ 17.513125] ? usb_start_wait_urb+0x65/0x160 [ 17.513604] ? usb_control_msg+0xdc/0x130 [ 17.514061] ? usb_xfer+0xa4/0x2a0 [ 17.514445] ? __i2c_transfer+0x108/0x3c0 [ 17.514899] ? i2c_transfer+0x57/0xb0 [ 17.515310] ? i2c_smbus_xfer_emulated+0x12f/0x590 [ 17.515851] ? _raw_spin_unlock_irqrestore+0x11/0x20 [ 17.516408] ? i2c_smbus_xfer+0x125/0x330 [ 17.516876] ? i2c_smbus_xfer+0x125/0x330 [ 17.517329] ? i2cdev_ioctl_smbus+0x1c1/0x2b0 [ 17.517824] ? i2cdev_ioctl+0x75/0x1c0 [ 17.518248] ? do_vfs_ioctl+0x9f/0x600 [ 17.518671] ? vfs_write+0x144/0x190 [ 17.519078] ? SyS_ioctl+0x74/0x80 [ 17.519463] ? entry_SYSCALL_64_fastpath+0x1e/0xad [ 17.519959] ---[ end trace d047c04982f5ac50 ]--- Cc: Signed-off-by: Sebastian Reichel Reviewed-by: Greg Kroah-Hartman Acked-by: Till Harbaum Signed-off-by: Wolfram Sang

i2c: i2c-tiny-usb: Remove RobotFuzz USB vendor:product ID

2014-01-13T12:56:52Z

The RobotFuzz device is not compatible with i2c-tiny-usb. Remove its entry from the USB table so that the new correct driver can be used. Signed-off-by: Andrew Lunn Signed-off-by: Wolfram Sang

i2c: tiny-usb: do not use stack as URB transfer_buffer

2013-08-19T17:46:38Z

Patch fixes i2c-tiny-usb not to use stack as URB transfer_buffer. URB buffers need to be DMA-able, which stack is not. Patch is only compile tested. Signed-off-by: Jussi Kivilinna Signed-off-by: Wolfram Sang

i2c-tiny-usb: Add support for the Robofuzz OSIF USB/I2C converter

2012-07-24T12:13:59Z

Robofuzz OSIF is a generic USB/iIC interface that embeds an ATMega8A AVR-RISC microcontroler. The device is based upon Till Harbaum's i2c-tiny-usb and although it enhances the original design with further functionnalities it still maintain compatibility with it with respect to the USB/I2C interface. Signed-off-by: Emmanuel Deloget Signed-off-by: Jean Delvare

USB: convert some miscellanies drivers to use module_usb_driver()

2011-11-18T17:52:10Z

This converts the remaining USB drivers in the kernel to use the module_usb_driver() macro which makes the code smaller and a bit simpler. Added bonus is that it removes some unneeded kernel log messages about drivers loading and/or unloading. Cc: Guenter Roeck Cc: Jean Delvare Cc: Ben Dooks Cc: Till Harbaum Cc: Karsten Keil Cc: Chris Ball Cc: David Woodhouse Cc: Lauro Ramos Venancio Cc: Aloisio Almeida Jr Cc: Samuel Ortiz Cc: Steve Glendinning Cc: Florian Tobias Schandinat Cc: Evgeniy Polyakov Cc: Wim Van Sebroeck Cc: "David S. Miller" Cc: Jesper Juhl Cc: Artem Bityutskiy Cc: Jamie Iles Cc: Andrew Morton Signed-off-by: Greg Kroah-Hartman

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

i2c-tiny-usb: Fix a comment on bus frequency

2010-03-02T11:23:40Z

The description of the delay parameter is incomplete, it suggests that there is a direct relation between the delay value and the bus frequency. In fact, due to additional delays in the i2c bitbanging code, the i2c clock is always much slower. Signed-off-by: Jean Delvare Cc: Till Harbaum

i2c: Make PCI device ids constant

2010-03-02T11:23:37Z

The id_table field of the struct pci_driver is constant in so it is worth to make initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // Signed-off-by: Márton Németh Cc: Julia Lawall Signed-off-by: Jean Delvare