linux-dev/drivers/iio/common/hid-sensors, branch master

iio: triggered-buffer: extend support to configure output buffers

2021-10-19T07:30:45Z

Now that output (kfifo) buffers are supported, we need to extend the {devm_}iio_triggered_buffer_setup_ext() parameter list to take a direction parameter. This allows us to attach an output triggered buffer to a DAC device. Unfortunately it's a bit difficult to add another macro to avoid changing 5 drivers where {devm_}iio_triggered_buffer_setup_ext() is used. Well, it's doable, but may not be worth the trouble vs just updating all these 5 drivers. Signed-off-by: Alexandru Ardelean Signed-off-by: Mihail Chindris Link: https://lore.kernel.org/r/20211007080035.2531-4-mihail.chindris@analog.com Signed-off-by: Jonathan Cameron

iio/drivers/hid-sensor: use HZ macros

2021-09-08T18:50:26Z

HZ unit conversion macros are available in units.h, use them and remove the duplicate definition. Link: https://lkml.kernel.org/r/20210816114732.1834145-8-daniel.lezcano@linaro.org Signed-off-by: Daniel Lezcano Reviewed-by: Andy Shevchenko Acked-by: Jonathan Cameron Cc: Chanwoo Choi Cc: Christian Eggers Cc: Guenter Roeck Cc: Jonathan Cameron Cc: Kyungmin Park Cc: Lars-Peter Clausen Cc: Lukasz Luba Cc: Maxime Coquelin Cc: Miquel Raynal Cc: MyungJoo Ham Cc: Peter Meerwald Cc: "Rafael J. Wysocki" Cc: Zhang Rui Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

iio: hid-sensors: Update header includes

2021-06-16T13:53:13Z

General driver churn doesn't always include updates of header includes. Manual review of the output of the include-what-you-use checker lead to the following cleanup. Hopefuly this brings things back to a good state for the hid-sensor drivers. Signed-off-by: Jonathan Cameron Cc: Jiri Kosina Cc: Srinivas Pandruvada Acked-by: Srinivas Pandruvada Link: https://lore.kernel.org/r/20210608205510.4033887-1-jic23@kernel.org

iio: hid-sensors: lighten exported symbols by moving to IIO_HID namespace

2021-06-16T13:53:13Z

A namespace for exported symbols makes clear who is a provider and who is a consumer of the certain resources. Besides that, it doesn't pollute the common namespace. Signed-off-by: Andy Shevchenko Acked-by: Alexandre Belloni Acked-by: Srinivas Pandruvada Link: https://lore.kernel.org/r/20210614162447.5392-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron

iio: hid: trigger: Balance runtime pm + use pm_runtime_resume_and_get()

2021-06-03T17:24:12Z

The call to pm_runtime_put_noidle() in remove() callback is not balanced by any gets Note this doesn't cause any problems beyond reader confusion as the runtime pm core protects against the reference counter going negative. Whilst here, use pm_runtiem_resume_and_get() to simplify code a little. Signed-off-by: Jonathan Cameron Cc: Srinivas Pandruvada Reviewed-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/20210509113354.660190-9-jic23@kernel.org

iio: core: move @id from struct iio_dev to struct iio_dev_opaque

2021-05-17T12:49:13Z

Continuing from Alexandru Ardelean's introduction of the split between driver modifiable fields and those that should only be set by the core. This could have been done in two steps to make the actual move after introducing iio_device_id() but there seemed limited point to that given how mechanical the majority of the patch is. Includes fixup from Alex for missing mxs-lradc-adc conversion. Signed-off-by: Jonathan Cameron Reviewed-by: Alexandru Ardelean Link: https://lore.kernel.org/r/20210426174911.397061-2-jic23@kernel.org

iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER

2021-05-10T13:01:48Z

During commit 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger"), the iio_triggered_buffer_{setup,cleanup}() functions got moved under the hid-sensor-trigger module. The above change works fine, if any of the sensors get built. However, when only the common hid-sensor-trigger module gets built (and none of the drivers), then the IIO_TRIGGERED_BUFFER symbol isn't selected/enforced. Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER gets selected. All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So, this change removes the IIO_TRIGGERED_BUFFER enforcement from each driver. Fixes: 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger") Reported-by: Thomas Deutschmann Cc: Srinivas Pandruvada Signed-off-by: Alexandru Ardelean Acked-by: Srinivas Pandruvada Link: https://lore.kernel.org/r/20210414084955.260117-1-aardelean@deviqon.com Signed-off-by: Jonathan Cameron

iio: set default trig->dev.parent

2021-03-25T19:13:50Z

When allocated with [devm_]iio_trigger_alloc(), set trig device parent to the device the trigger is allocated for by default. It can always be reassigned in the probe routine. Change iio_trigger_alloc() API to add the device pointer to be coherent with devm_iio_trigger_alloc, using similar interface to iio_device_alloc(). Signed-off-by: Gwendal Grignou Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20210309193620.2176163-2-gwendal@chromium.org Signed-off-by: Jonathan Cameron

iio: Add relative sensitivity support

2021-03-11T20:47:09Z

Some hid sensors may use relative sensitivity such as als sensor. This patch adds relative sensitivity checking for all hid sensors. Signed-off-by: Ye Xiang Acked-by: Jiri Kosina Link: https://lore.kernel.org/r/20210207070048.23935-2-xiang.ye@intel.com Signed-off-by: Jonathan Cameron

iio: hid-sensors: Move get sensitivity attribute to hid-sensor-common

2021-03-11T20:47:09Z

No functional change has been made with this patch. The main intent here is to reduce code repetition of getting sensitivity attribute. In the current implementation, sensor_hub_input_get_attribute_info() is called from multiple drivers to get attribute info for sensitivity field. Moving this to common place will avoid code repetition. Signed-off-by: Ye Xiang Acked-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210201054921.18214-2-xiang.ye@intel.com Signed-off-by: Jonathan Cameron