linux-dev/drivers/iio/humidity, branch master

i2c: Make remove callback return void

2022-08-16T10:46:26Z

The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin Reviewed-by: Jeremy Kerr Reviewed-by: Benjamin Mugnier Reviewed-by: Javier Martinez Canillas Reviewed-by: Crt Mori Reviewed-by: Heikki Krogerus Acked-by: Greg Kroah-Hartman Acked-by: Marek Behún # for leds-turris-omnia Acked-by: Andy Shevchenko Reviewed-by: Petr Machata # for mlxsw Reviewed-by: Maximilian Luz # for surface3_power Acked-by: Srinivas Pandruvada # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil # for media/* + staging/media/* Acked-by: Miguel Ojeda # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli # for versaclock5 Reviewed-by: Ajay Gupta # for ucsi_ccg Acked-by: Jonathan Cameron # for iio Acked-by: Peter Rosin # for i2c-mux-*, max9860 Acked-by: Adrien Grassein # for lontium-lt8912b Reviewed-by: Jean Delvare # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard # for IPMI Reviewed-by: Vladimir Oltean Acked-by: Dmitry Torokhov Acked-by: Sebastian Reichel # for drivers/power Acked-by: Krzysztof Hałasa Signed-off-by: Uwe Kleine-König Signed-off-by: Wolfram Sang

Merge tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

2022-07-14T13:04:49Z

Jonathan writes: IIO new device support, features and minor fixes for 5.20 Several on-running cleanup efforts dominate this time, plus the DMA safety alignment issue identified due to improved understanding of the restrictions as a result of Catalin Marinas' efforts in that area. One immutable branch in here due to MFD and SPMI elements needed for the qcom-rradc driver. Device support * bmi088 - Add support for bmi085 (accelerometer part of IMU) - Add support for bmi090l (accelerometer part of IMU) * mcp4922 - Add support for single channel device MCP4921 * rzg2l-adc - Add compatible and minor tweaks to support RZ/G2UL ADC * sca3300 - Add support for scl3300 including refactoring driver to support multiple device types and cleanup noticed whilst working on driver. * spmi-rradc - New driver for Qualcomm SPMI Round Robin ADC including necessary additional utility functions in SPMI core and related MFD driver. * ti-dac55781 - Add compatible for DAC121C081 which is very similar to existing parts. Features * core - Warn on iio_trigger_get() on an unregistered IIO trigger. * bma400 - Triggered buffer support - Activity and step counting - Misc driver improvements such as devm and header ordering * cm32181 - Add PM support. * cros_ec - Sensor location support * sx9324 - Add precharge resistor setting - Add internal compensation resistor setting - Add CS idle/sleep mode. * sx9360 - Add precharge resistor setting * vl53l0x - Handle reset GPIO, regulator and relax handling of irq type. Cleanup and minor fixes: Treewide changes - Cleanup of error handling in remove functions in many drivers. - Update dt-binding maintainers for a number of ADI bindings. - Several sets of conversion of drivers from device tree specific to generic device properties. Includes fixing up various related header and Kconfig issues. - Drop include of of.h from iio.h and fix up drivers that need to include it directly. - More moves of clusters of drivers into appropriate IIO_XXX namespaces. - Tree wide fix of a long running bug around DMA safety requirements. IIO was using __cacheline_aligned to pad iio_priv() structures. This worked for a long time by coincidence, but correct alignment is ARCH_KMALLOC_MINALIGN. As there is activity around this area, introduce an IIO local IIO_DMA_MINALIGN to allow for changing it in one place rather than every driver in future. Note, there have been no reports of this bug in the wild, and it may not happen on any platforms supported by upstream, so no rush to backport these fixes. Other cleanup * core - Switch to ida_alloc()/free() - Drop unused iio_get_time_res() - Octal permissions and DEVICE_ATTR_* macros. - Cleanup bared unsigned usage. * MAINTAINERS - Add include/dt-bindings/iio/ to the main IIO entry. * ad5380 - Comment syntax fix. * ad74413r - Call to for_each_set_bit_from(), with from value as 0 replaced. * ad7768-1 - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core. * adxl345 - Fix wrong address in dt-binding example. * adxl367 - Drop extra update of FIFO watermark. * at91-sama5d2 - Limit requested watermark to the hwfifo size. * bmg160, bme680 - Typos * cio-dac - Switch to iomap rather than direct use of ioports * kxsd9 - Replace CONFIG_PM guards with new PM macros that let the compiler cleanly remove the unused code and structures when !CONFIG_PM * lsm6dsx - Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS(). Then move to Namespace. * meson_saradc - general cleanup. - Avoid attaching resources to iio_dev->dev - Use same struct device for all error messages - Convert to dev_err_probe() and use local struct device *dev to reduce code complexity. - Use devm_clk_get_optional() instead of hand rolling. - Use regmap_read_poll_timeout() instead of hand rolling. * mma7660 - Drop ACPI_PTR() use that is unhelpful. * mpu3050 - Stop exporting symbols not used outside of module - Switch to new DEFINE_RUNTIME_DEV_PM_OPS() macro and move to Namespace. * ping - Typo fix * qcom-spmi-rradc - Typo fix * sc27xx - Convert to generic struct u32_fract * srf08 - Drop a redundant check on !val * st_lsm6dsx - Limit the requested watermark to the hwfifo size. * stm32-adc - Use generic_handle_domain_irq() instead of opencoding. - Fix handling of ADC disable. * stm32-dac - Use str_enabled_disable() instead of open coding. * stx104 - Switch to iomap rather than direct use of ioports * tsc2046 - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core. * tsl2563 - Replace flush_scheduled_work() with cancel_delayed_work_sync() - Replace cancel_delayed_work() with cancel_delayed_work_sync() * vl53l0x - Make the VDD regulator optional by allowing a dummy regulator. * tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (244 commits) iio: adc: xilinx-xadc: Drop duplicate NULL check in xadc_parse_dt() iio: adc: xilinx-xadc: Make use of device properties iio: light: cm32181: Add PM support iio: adc: ad778-1: do not explicity set INDIO_BUFFER_TRIGGERED mode iio: adc: ti-tsc2046: do not explicity set INDIO_BUFFER_TRIGGERED mode iio: adc: stm32-adc: disable adc before calibration iio: adc: stm32-adc: make safe adc disable iio: dac: ad5380: align '*' each line and drop unneeded blank line iio: adc: qcom-spmi-rradc: Fix spelling mistake "coherrency" -> "coherency" iio: Don't use bare "unsigned" dt-bindings: iio: dac: mcp4922: expand for mcp4921 support iio: dac: mcp4922: add support to mcp4921 iio: chemical: sps30: Move symbol exports into IIO_SPS30 namespace iio: pressure: bmp280: Move symbol exports to IIO_BMP280 namespace iio: imu: bmi160: Move exported symbols to IIO_BMI160 namespace iio: adc: stm32-adc: Use generic_handle_domain_irq() proximity: vl53l0x: Make VDD regulator actually optional MAINTAINERS: add include/dt-bindings/iio to IIO SUBSYSTEM AND DRIVERS dt-bindings: iio/accel: Fix adi,adxl345/6 example I2C address iio: gyro: bmg160: Fix typo in comment ...

iio:humidity:hts221: rearrange iio trigger get and register

2022-06-19T16:22:49Z

IIO trigger interface function iio_trigger_get() should be called after iio_trigger_register() (or its devm analogue) strictly, because of iio_trigger_get() acquires module refcnt based on the trigger->owner pointer, which is initialized inside iio_trigger_register() to THIS_MODULE. If this call order is wrong, the next iio_trigger_put() (from sysfs callback or "delete module" path) will dereference "default" module refcnt, which is incorrect behaviour. Fixes: e4a70e3e7d84 ("iio: humidity: add support to hts221 rh/temp combo device") Signed-off-by: Dmitry Rokosov Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220524181150.9240-6-ddrokosov@sberdevices.ru Cc: Signed-off-by: Jonathan Cameron

iio: humidity: hts221: Move symbol exports into IIO_HTS221 namespace

2022-06-15T21:07:09Z

Avoid unnecessary pollution of the global symbol namespace by moving library functions in to a specific namespace and import that into the drivers that make use of the functions. For more info: https://lwn.net/Articles/760045/ Signed-off-by: Jonathan Cameron Cc: Lorenzo Bianconi Link: https://lore.kernel.org/r/20220220181522.541718-7-jic23@kernel.org Acked-by: Lorenzo Bianconi Link: https://lore.kernel.org/r/20220604161223.461847-4-jic23@kernel.org

iio: humidity: hts221: Use EXPORT_SIMPLE_DEV_PM_OPS() to allow compiler to remove dead code.

2022-06-15T21:07:09Z

If CONFIG_PM_SLEEP is not defined using EXPORT_SIMPLE_DEV_PM_OPS() in conjunction with pm_sleep_ptr() allows the compiler to remove the unused code and data. This removes the need for __maybe_unused markings etc. Signed-off-by: Jonathan Cameron Cc: Lorenzo Bianconi Link: https://lore.kernel.org/r/20220220181522.541718-6-jic23@kernel.org Acked-by: Lorenzo Bianconi Link: https://lore.kernel.org/r/20220604161223.461847-3-jic23@kernel.org

iio: humidity: hts221_buffer: explicitly add proper header files

2022-06-14T10:53:20Z

Do not trust the fact that iio.h includes of.h which in turn includes all the headers we are relying on. The ultimate goal is to actually drop of.h from iio.h. Signed-off-by: Nuno Sá Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220610084545.547700-16-nuno.sa@analog.com Signed-off-by: Jonathan Cameron

iio:common:meas-spec: Move exports into IIO_MEAS_SPEC_SENSORS

2022-02-18T11:42:26Z

The obvious choice of ms_sensors felt rather too likely to clash with other namespaces introduced in future, hence the longer abbreviation. In order to avoid unnecessary pollution of the global symbol namespace move the common/library functions into a specific namespace and import that into the various specific device drivers that use them. For more information see https://lwn.net/Articles/760045/ Signed-off-by: Jonathan Cameron Cc: Alexandre Belloni Cc: William Markezana Cc: Ludovic Tancerel Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220130205701.334592-5-jic23@kernel.org

iio: humidity: dht11: Switch from of headers to mod_devicetable.h

2022-02-06T15:21:43Z

There is nothing directly using of specific interfaces in this driver, so lets not include the headers. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220202203420.56654-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron

iio: humidity: hdc100x: Add ACPI HID table

2022-01-30T13:44:53Z

x86 boards may use ACPI HID "TXNW1010" for the hdc100x device. TI told us "The ACPI ID for TI is: https://uefi.org/node/1028 (TXNW), therefore it would most likely be appropriate to use TXNW1010." So add an ACPI match table for that accordingly. Signed-off-by: Kai-Heng Feng Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220128042054.2062060-1-kai.heng.feng@canonical.com Signed-off-by: Jonathan Cameron

iio: humidity: hdc100x: Add margin to the conversion time

2021-07-24T17:13:02Z

The datasheets have the following note for the conversion time specification: "This parameter is specified by design and/or characterization and it is not tested in production." Parts have been seen that require more time to do 14-bit conversions for the relative humidity channel. The result is ENXIO due to the address phase of a transfer not getting an ACK. Delay an additional 1 ms per conversion to allow for additional margin. Fixes: 4839367d99e3 ("iio: humidity: add HDC100x support") Signed-off-by: Chris Lesiak Acked-by: Matt Ranostay Link: https://lore.kernel.org/r/20210614141820.2034827-1-chris.lesiak@licor.com Cc: Signed-off-by: Jonathan Cameron