linux-dev/drivers/iio/light, branch master

iio: light: tsl2583: Fix module unloading

2022-10-17T07:51:26Z

tsl2583 probe() uses devm_iio_device_register() and calling iio_device_unregister() causes the unregister to occur twice. s Switch to iio_device_register() instead of devm_iio_device_register() in probe to avoid the device managed cleanup. Fixes: 371894f5d1a0 ("iio: tsl2583: add runtime power management support") Signed-off-by: Shreeya Patel Link: https://lore.kernel.org/r/20220826122352.288438-1-shreeya.patel@collabora.com Cc: Signed-off-by: Jonathan Cameron

Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2022-10-08T15:56:37Z

Pull char/misc and other driver updates from Greg KH: "Here is the large set of char/misc and other small driver subsystem changes for 6.1-rc1. Loads of different things in here: - IIO driver updates, additions, and changes. Probably the largest part of the diffstat - habanalabs driver update with support for new hardware and features, the second largest part of the diff. - fpga subsystem driver updates and additions - mhi subsystem updates - Coresight driver updates - gnss subsystem updates - extcon driver updates - icc subsystem updates - fsi subsystem updates - nvmem subsystem and driver updates - misc driver updates - speakup driver additions for new features - lots of tiny driver updates and cleanups All of these have been in the linux-next tree for a while with no reported issues" * tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits) w1: Split memcpy() of struct cn_msg flexible array spmi: pmic-arb: increase SPMI transaction timeout delay spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes spmi: pmic-arb: correct duplicate APID to PPID mapping logic spmi: pmic-arb: add support to dispatch interrupt based on IRQ status spmi: pmic-arb: check apid against limits before calling irq handler spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq spmi: pmic-arb: handle spurious interrupt spmi: pmic-arb: add a print in cleanup_irq drivers: spmi: Directly use ida_alloc()/free() MAINTAINERS: add TI ECAP driver info counter: ti-ecap-capture: capture driver support for ECAP Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items dt-bindings: counter: add ti,am62-ecap-capture.yaml counter: Introduce the COUNTER_COMP_ARRAY component type counter: Consolidate Counter extension sysfs attribute creation counter: Introduce the Count capture component counter: 104-quad-8: Add Signal polarity component counter: Introduce the Signal polarity component counter: interrupt-cnt: Implement watch_validate callback ...

iio: light: st_uvis25: Use EXPORT_NS_SIMPLE_DEV_PM_OPS()

2022-09-21T17:42:57Z

Using this new macro removes the need to mark the callbacks __maybe_unused. One slightly complexity in this case is that the export will exist if CONFIG_PM is set, but only be used if CONFIG_PM_SLEEP is also set. This is harmless. Signed-off-by: Jonathan Cameron Reviewed-by: Andy Shevchenko Cc: Lorenzo Bianconi Link: https://lore.kernel.org/r/20220807185618.1038812-7-jic23@kernel.org Signed-off-by: Jonathan Cameron

Merge tag 'iio-for-6.1a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

2022-09-21T14:04:24Z

Jonathan writes: 1st set of IIO new device support, features and cleanup for 6.1 This includes Nuno Sa's work to move the IIO core over to generic firmware properties rather than having DT specific code paths. Combined with Andy Shevchenko's long term work on drivers, this leaves IIO in a good state for handling other firmware types. New device support - liteon,ltrf216a * New driver and dt bindings to support this Light sensor. - maxim,max11205 * New driver for this 16bit single channel ADC. - memsensing,msa311 * New driver for this accelerometer. Includes a string helper for read/write. - richtek,rtq6056 * New driver and dt binding to support this current monitor used to measure power usage. - yamaha,yas530 * Support the YAS537 variant (series includes several fixes for other parts and new driver features). Staging graduation - adi,ad7746 CDC. Cleanup conducted against set of roadtest tests using the posted RFC of that framework. Features - core * Large rework to make all the core IIO code use generic firmware properties. Includes switching some drivers over as well using newly provided generic interfaces and allowing removal of DT specific ones. * Support for gesture event types for single and double tap. Used in bosch,bma400. - atmel,at91-sama5d2 * Add support for temperature sensor which uses two muxed inputs to estimate the temperature. * Handle trackx bits of EMR register to improve temp sampling accuracy. * Runtime PM support. - liteon,ltrf216a * Add a _raw channel output to allow working around an issue with differing conversions equations that breaks some user space controls. - mexelis,mlx90632 * Support regulator control. - ti,tsc2046 * External reference voltage support. Clean up and minor fixes - Tree-wide * devm_clk_get_enabled() replacements of opencoded equivalent. * Remaining IIO_DMA_MINALIGN conversions (the staging/iio drivers). * Various minor warning and similar cleanup such as missing static markings. * strlcpy() to strscpy() for cases where return value not checked. * provide units.h entries for more HZ units and use them in drivers. - dt-bindings cleanup * Drop maintainers listss where the email address is bouncing. * Switch spi devices over to using spi-peripheral.yaml * Add some missing unevaluatedProperties / additionalProperties: false entries. - ABI docs * Add some missing channel type specific sampling frequency entries. * Add parameter names for callback parameters. - MAINTAINERS * Fix wrong ADI forum links. - core * lockdep class per device, to avoid an issue with nest when one IIO device is the consumer of another. * White space tweaks. - asc,dlhl60d * Use get_unaligned_be24 to avoid some unusual data manipulation and masking. - atmel,at91-sama5d2 * Fix wrong max value. * Improve error handling when measuring pressure and touch. * Add locks to remove races on updating oversampling / sampling freq. * Add missing calls in suspend and resume path to ensure state is correctly brought up if buffered capture was in use when suspend happened. * Error out of write_raw() callback if buffered capture enabled to avoid unpredictable behavior. * Handle different versions having different oversampling ratio support and drop excess error checking. * Cleanup magic value defines where the name is just the value and hence hurts readability. * Use read_avail() callback to provide info on possible oversampling ratios. * Correctly handle variable bit depth when doing oversampling on different supported parts. Also handle higher oversampling ratios. - fsl,imx8qxp * Don't ignore errors from regulator_get_voltage() so as to avoid some very surprising scaling. - invensense,icp10100 * Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS. UNIVERSAL rarely made sense and is now deprecated. In this driver we just avoid double disabling in some paths. - maxim,max1363 * Drop consumer channel map provision by platform data. There have been better ways of doing this for years and there are no in tree users. - microchip,mcp3911 * Update status to maintained. - qcom,spmi-adc5 * Support measurement of LDO output voltage. - qcom,spmi-adc * Add missing channel available on SM6125 SoC. - st,stmpe * Drop requirement on node name in binding now that driver correctly doesn't enforce it. - stx104 * Move to more appropriate addac directory - ti,am335x * Document ti,am654-adc compatible already in use in tree. - ti,hmc5843 * Move dev_pm_ops out of header and use new pm macros to handle export. - yamaha,yas530 * Minor cleanups. * tag 'iio-for-6.1a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (142 commits) iio: pressure: icp10100: Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS(). iio: adc: max1363: Drop provision to provide an IIO channel map via platform data iio: accel: bma400: Add support for single and double tap events iio: Add new event type gesture and use direction for single and double tap iio: Use per-device lockdep class for mlock iio: adc: add max11205 adc driver dt-bindings: iio: adc: Add max11205 documentation file iio: magnetometer: yamaha-yas530: Use dev_err_probe() iio: magnetometer: yamaha-yas530: Make strings const in chip info iio: magnetometer: yamaha-yas530: Use pointers as driver data iio: adc: tsc2046: silent spi_device_id warning iio: adc: tsc2046: add vref support dt-bindings: iio: adc: ti,tsc2046: add vref-supply property iio: light: ltrf216a: Add raw attribute dt-bindings: iio: Add missing (unevaluated|additional)Properties on child nodes MAINTAINERS: fix Analog Devices forum links iio/accel: fix repeated words in comments dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver iio: add MEMSensing MSA311 3-axis accelerometer driver dt-bindings: vendor-prefixes: add MEMSensing Microsystems Co., Ltd. ...

Merge tag 'v6.0-rc5' into i2c/for-mergewindow

2022-09-16T19:42:18Z

Linux 6.0-rc5

iio: light: ltrf216a: Add raw attribute

2022-08-30T17:35:38Z

Add IIO_CHAN_INFO_RAW to the mask to be able to read raw values from the light sensor. The userspace code for brightness control in steam deck uses the in_illuminance_input value through sysfs and multiplies it with a constant stored in BIOS at factory calibration time. The downstream driver for LTRF216A that we have been using has incorrect formula for LUX calculation which we corrected in the upstreamed driver. Now to be able to use the upstreamed driver, we need to add some magic in userspace so that the brightness control works like before even with the updated LUX formula. Hence, we need the raw data to calculate a constant that can be added in userspace code. Downstream driver LUX formula :- (greendata*8*LTRF216A_WIN_FAC) / (data->als_gain_fac*data->int_time_fac*10) Upstreamed driver LUX formula :- (greendata*45*LTRF216A_WIN_FAC) / (data->als_gain_fac*data->int_time_fac) greendata is the ALS_DATA which we would like to get through sysfs using the raw attribute. Signed-off-by: Shreeya Patel Link: https://lore.kernel.org/r/20220812100424.529425-1-shreeya.patel@collabora.com Signed-off-by: Jonathan Cameron

iio: light: cm32181: make cm32181_pm_ops static

2022-08-21T17:24:16Z

This symbol is not used outside of cm32181.c, so marks it static. Fixes the following sparse warnings: >> drivers/iio/light/cm32181.c:508:1: sparse: sparse: symbol 'cm32181_pm_ops' was not declared. Should it be static? Reported-by: kernel test robot Signed-off-by: sunliming Link: https://lore.kernel.org/r/20220815012930.150078-1-sunliming@kylinos.cn Signed-off-by: Jonathan Cameron

i2c: Make remove callback return void

2022-08-16T10:46:26Z

The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin Reviewed-by: Jeremy Kerr Reviewed-by: Benjamin Mugnier Reviewed-by: Javier Martinez Canillas Reviewed-by: Crt Mori Reviewed-by: Heikki Krogerus Acked-by: Greg Kroah-Hartman Acked-by: Marek Behún # for leds-turris-omnia Acked-by: Andy Shevchenko Reviewed-by: Petr Machata # for mlxsw Reviewed-by: Maximilian Luz # for surface3_power Acked-by: Srinivas Pandruvada # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil # for media/* + staging/media/* Acked-by: Miguel Ojeda # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli # for versaclock5 Reviewed-by: Ajay Gupta # for ucsi_ccg Acked-by: Jonathan Cameron # for iio Acked-by: Peter Rosin # for i2c-mux-*, max9860 Acked-by: Adrien Grassein # for lontium-lt8912b Reviewed-by: Jean Delvare # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard # for IPMI Reviewed-by: Vladimir Oltean Acked-by: Dmitry Torokhov Acked-by: Sebastian Reichel # for drivers/power Acked-by: Krzysztof Hałasa Signed-off-by: Uwe Kleine-König Signed-off-by: Wolfram Sang

iio: light: cm3605: Fix an error handling path in cm3605_probe()

2022-08-15T21:30:40Z

The commit in Fixes also introduced a new error handling path which should goto the existing error handling path. Otherwise some resources leak. Fixes: 0d31d91e6145 ("iio: light: cm3605: Make use of the helper function dev_err_probe()") Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/0e186de2c125b3e17476ebf9c54eae4a5d66f994.1659854238.git.christophe.jaillet@wanadoo.fr Cc: Signed-off-by: Jonathan Cameron

iio: light: cm32181: Mark the dev_pm_ops static.

2022-08-15T21:30:01Z

Only accessed from the local file. Warning: drivers/iio/light/cm32181.c:508:1: warning: symbol 'cm32181_pm_ops' was not declared. Should it be static? Fixes: 68c1b3dd5c48 ("iio: light: cm32181: Add PM support") Signed-off-by: Jonathan Cameron Cc: Kai-Heng Feng Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220807145457.646062-3-jic23@kernel.org