linux-dev/drivers/iio/magnetometer, branch linus/master

Merge tag 'iio-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

2022-05-19T14:53:08Z

Jonathan writes: First set of IIO new device support, features and cleanup for 5.19 Usual mixed bag. Stand out this time is Andy Shevchenko's continuing effort to move drivers over the generic firmware interfaces. Device support * sprd,sc2720 - upm9620 binding addition. - Refactor and support for sc2720, sc2721 and sc2730. * ti,ads1015 - Refactor driver and add support for TLA2024. Device support (IDs only) * invensense,mpu6050 - Add ID for ICM-20608-D. * st,accel: - Add ID for lis302dl. * st,lsm6dsx - Add support for ASM330LHHX (can fallback to LSM6DSR.) Features * convert drivers to device properties - IIO core - adi,ad7266 - adi,adis16480 - adi,adxl355 - bosch,bmi160 - domintech,dmard06 - fsl,fxas21002c - invensense,mpu3050 - linear,ltc2983 - linear,ltc2632 - maxbotix,mb1232 - maxim,max31856 - maxim,max31865 - multiplexer - ping - rescale - taos,tsl2772 * core - Add runtime check on whether realbits fit in storagebits for each channel. * adi,ad_sigma_delta - Add sequencer support and relevant update_scan_mode callbacks for adi,ad7192 and adi,ad7124. Cleanup and minor fixes * MAINTAINERS - Update Lorenzo Bianconi's email address for IIO drivers. - Add entry for ad3552r and update maintainer in dt-binding doc. * tree-wide - Replace strtobool() with kstrtobool(). - Drop false OF dependencies. * core - Tidy up and document IIO modes. - Take iio_buffer_enabled() out of header allowing current_mode to be moved to the opaque structure. - As all kfifo buffers use the same mode value, drop that parameter and set it unconditionally. - White space fixes and similar. - Drop use of list iterator variable for list_for_each_entry_continue_reverse and use list_prepare_entry to restart. * sysfs-trigger - Replace use of 'found' variable with dedicate list iterator variable. * adi,ad7124 - Drop misleading shift. * adi,ad2s1210 - Remove redundant local variable assignment. * adi,adis16480 - Use local device pointer to reduce repetition. - Improve handling of clocks. * domintech,dmard09 - White space. * dummy driver - Improve error handling. * fsl,mma8452 - Add missing documentation of name element. * invensense,mpu3050 - Stop remove() returning non 0. * kionix,kxsd9 - White space. * linear,ltc2688 - Use local variable for struct device. - Combine of_node_put() error handling paths. * linear,ltc2983 - Avoid use of constants in messages where a define is available. * microchip,mcp4131 - Fix compatible in dt example. * pni,rm3100 - Stop directly accessing iio_dev->current_mode just to find out if the buffer is enabled. * renesas,rzg2l - Relax kconfig constraint to include newer devices. * sprd,sc27xx - Fix wrong scaling mask. - Improve the calibration values. * samsung,ssp - Replace a 'found' variable in favor of an explicit value that was found. * sensortek,stk3xx - Add proximity-near-level binding and driver support. * st,st_sensors: - Drop unused accel_type enum. - Return early in *_write_raw() - Drop unnecessary locking in _avail functions. - Add local lock to protect odr against concurrent updates allowing mlock to no longer be used outside of the core. - Use iio_device_claim_direct_mode() rather than racy checking of the current mode. * st,stmpe-adc - Fix checks on wait_for_completion_timeout(). - Allow use of of_device_id for matching. * st,stm32-dfsdm - Stop accessing iio_dev->current_mode to find out if the buffer is enabled (so we can hide that variable in the opaque structure) * st,vl53l0x - Fix checks on wait_for_completion_timeout. * ti,ads1015 - Add missing ID for ti,ads1115 in binding doc. - Convert from repeated chip ID look up to selecting static const data. - Switch to read_avail() callback. * ti,ads8688 - Use of_device_id for driver matching. * ti,palmas-adc - Drop a warning on minor calibration mismatch leading to slightly negative values after applying the calibration. * tag 'iio-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (95 commits) iio: ti-ads8688: use of_device_id for OF matching iio: stmpe-adc: use of_device_id for OF matching dt-bindings: iio: Fix incorrect compatible strings in examples iio: gyro: mpu3050: Make mpu3050_common_remove() return void iio: dac: ltc2632: Make use of device properties iio: temperature: max31865: Make use of device properties iio: proximity: mb1232: Switch to use fwnode_irq_get() iio: imu: adis16480: Improve getting the optional clocks iio: imu: adis16480: Use temporary variable for struct device iio: imu: adis16480: Make use of device properties staging: iio: ad2s1210: remove redundant assignment to variable negative iio: adc: sc27xx: add support for PMIC sc2730 iio: adc: sc27xx: add support for PMIC sc2720 and sc2721 iio: adc: sc27xx: refactor some functions for support more PMiCs iio: adc: sc27xx: structure adjustment and optimization iio: adc: sc27xx: Fine tune the scale calibration values iio: adc: sc27xx: fix read big scale voltage not right dt-bindings:iio:adc: add sprd,ump9620-adc dt-binding iio: proximity: stk3310: Export near level property for proximity sensor dt-bindings: iio: light: stk33xx: Add proximity-near-level ...

iio: magnetometer: ak8974: Drop dependency on OF

2022-04-28T18:22:55Z

Nothing in this driver depends on OF firmware so drop the dependency to remove the false impression such a dependency exists. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220413184502.20998-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron

iio: magnetometer: ak8975: Fix the error handling in ak8975_power_on()

2022-04-10T15:59:29Z

When the driver fails to enable the regulator 'vid', we will get the following splat: [ 79.955610] WARNING: CPU: 5 PID: 441 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0 [ 79.959641] RIP: 0010:_regulator_put+0x3ec/0x4e0 [ 79.967570] Call Trace: [ 79.967773] [ 79.967951] regulator_put+0x1f/0x30 [ 79.968254] devres_release_group+0x319/0x3d0 [ 79.968608] i2c_device_probe+0x766/0x940 Fix this by disabling the 'vdd' regulator when failing to enable 'vid' regulator. Signed-off-by: Zheyu Ma Link: https://lore.kernel.org/r/20220409034849.3717231-2-zheyuma97@gmail.com Cc: Signed-off-by: Jonathan Cameron

iio: st_sensors: Stop abusing mlock to ensure internal coherency

2022-04-10T15:21:45Z

An odr_lock has been introduced to protect local accesses to the odr internal cache and ensure the cached value always reflected the actual value. Using the mlock() for this purpose is no longer needed, so let's drop these extra mutex_lock/unlock() calls. Suggested-by: Jonathan Cameron Cc: Denis Ciocca Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/r/20220207143840.707510-8-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron

iio: st_sensors: Return as early as possible from the _write_raw() callbacks

2022-04-10T15:15:02Z

As there is no cleanup to do, let's return as early as possible in the various ST sensor drivers _write_raw() callback functions. There is no functional change. Suggested-by: Jonathan Cameron Cc: Denis Ciocca Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/r/20220207143840.707510-5-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron

iio: magnetometer: rm3100: Stop abusing the ->currentmode

2022-04-10T15:15:02Z

This is an internal variable for the core, here it is set to a "default" value by the driver in order to later be able to perform checks against it. None of this is needed because this check actually cares about the buffers being enabled or not. So it is an unproper side-channel access to the information "are the buffers enabled?", returned officially by the iio_buffer_enabled() helper. Use this helper instead. Cc: Song Qiang Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/r/20220207143840.707510-3-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron

Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2022-03-28T19:27:35Z

Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits) firmware: google: Properly state IOMEM dependency kgdbts: fix return value of __setup handler firmware: sysfb: fix platform-device leak in error path firmware: stratix10-svc: add missing callback parameter on RSU arm64: dts: qcom: add non-secure domain property to fastrpc nodes misc: fastrpc: Add dma handle implementation misc: fastrpc: Add fdlist implementation misc: fastrpc: Add helper function to get list and page misc: fastrpc: Add support to secure memory map dt-bindings: misc: add fastrpc domain vmid property misc: fastrpc: check before loading process to the DSP misc: fastrpc: add secure domain support dt-bindings: misc: add property to support non-secure DSP misc: fastrpc: Add support to get DSP capabilities misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP misc: fastrpc: separate fastrpc device from channel context dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells dt-bindings: nvmem: make "reg" property optional nvmem: brcm_nvram: parse NVRAM content into NVMEM cells nvmem: dt-bindings: Fix the error of dt-bindings check ...

Merge tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

2022-03-22T01:33:57Z

Pull spi updates from Mark Brown: "The overwhelming bulk of this pull request is a change from Uwe Kleine-König which changes the return type of the remove() function to void as part of some wider work he's doing to do this for all bus types, causing updates to most SPI device drivers. The branch with that on has been cross merged with a couple of other trees which added new SPI drivers this cycle, I'm not expecting any build issues resulting from the change. Otherwise it's been a relatively quiet release with some new device support, a few minor features and the welcome completion of the conversion of the subsystem to use GPIO descriptors rather than numbers: - Change return type of remove() to void. - Completion of the conversion of SPI controller drivers to use GPIO descriptors rather than numbers. - Quite a few DT schema conversions. - Support for multiple SPI devices on a bus in ACPI systems. - Big overhaul of the PXA2xx SPI driver. - Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and Sunplus SP7021" [ And this is obviously where that spi change that snuck into the regulator tree _should_ have been :^] * tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits) spi: fsi: Implement a timeout for polling status spi: Fix erroneous sgs value with min_t() spi: tegra20: Use of_device_get_match_data() spi: mediatek: add ipm design support for MT7986 spi: Add compatible for MT7986 spi: sun4i: fix typos in comments spi: mediatek: support tick_delay without enhance_timing spi: Update clock-names property for arm pl022 spi: rockchip-sfc: fix platform_get_irq.cocci warning spi: s3c64xx: Add spi port configuration for Tesla FSD SoC spi: dt-bindings: samsung: Add fsd spi compatible spi: topcliff-pch: Prevent usage of potentially stale DMA device spi: tegra210-quad: combined sequence mode spi: tegra210-quad: add acpi support spi: npcm-fiu: Fix typo ("npxm") spi: Fix Tegra QSPI example spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ spi: cadence: fix platform_get_irq.cocci warning spi: Update NXP Flexspi maintainer details dt-bindings: mfd: maxim,max77802: Convert to dtschema ...

Merge tag 'iio-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

2022-03-18T11:41:32Z

Jonathan writes: First set of new device support, fixes, cleanups and features for IIO in 5.18 This cycle we had quite a few series that applied similar changes to lots of drivers. To keep this description manageable I have called those out in their own section rather than per driver. Particularly pleased to see the long running AFE precision series going in this cycle. Series includes some late breaking fixes. New device support * adi,ada4250 amplifier - New driver and dt bindings for this programmable gain amplifier. * adi,admv1014 microwave down-converter - New driver, dt bindings and some device specific ABI that may be generalized as more drivers for devices similar to this are added. * adi,admv4420 K Band down-converter. - New driver and dt bindings. * adi,adxl367 accelerometer driver. - New driver, dt-bindings + some new IIO ABI definitions to support reference magnitude events where an estimate of the acceleration due to gravity has been removed. - A few fixes as follow up patches. * adi,ltc2688 DAC with toggle and dither modes. - New driver and bindings. Includes some new driver specific (for now) ABI for handling toggle mode and the addition of a dither waveform to the DAC output. * AFE (analog front end) add support for additional types of analog device in front of an ADC. - RTD temperature sensors with dt bindings. - Temperature transducers wit dt bindings. - Related cleanup and features listed in other sections below. * maxim,ds3502 potentiometer. - Add support to ds1803 driver which required significant rework. * mediatek,mt2701-auxadc driver - Add mediatek,mt8186-auxadc - id table and chip specific info only. * semtech,sx9324, semtech,ax9360 - Substantial refactoring of sx9310 to extract core logic for reuse into a separate module - New driver using this supporting sx9324 proximity sensors. - New driver using this supporting sx9360 proximity sensors. * silan,sc7a20 - Compatible with the st,lis2dh (or nearly anyway) so add ID and chip specific info to enable support. Also silan vendor ID added for dt-bindings. Staging graduation * adi,ad7280a monitoring ADC for stacked lithium-ion batteries in electric cars and similar. - Substantial rework of driver required to bring inline with current IIO best practice. An unusual device in IIO so some interesting features we may see more of in future. Multiple driver/core cleanup - Use sysfs_emit() in simple locations where there is no path to change to various core created attributes. - Trivial white space fixes around inconsistency between space after { and before } in id tables. - Introduce new handling for fractional types to avoid repeated similar implementations. Use this in 3 drivers. Note this is also targeted at future use in the AFE driver and was motivated by discussions around the precision related work on that driver. - of related header cleanups - drop of*.h and add mod_devicetable.h as appropriate. - Move a number of symbol exports into IIO_* namespaces. Two categories, 1) Library used by multiple drivers e.g. st_sensors 2) Core driver module exporting functions used by bus specific modules. A few related cleanups in this set. - Switch from CONFIG_PM_* guards to new DEFINE_SIMPLE_DEV_PM_OPS() and similar to simplify drivers and take advantage of these new macros allowing the compiler to do the job or removing unused code without the need for __maybe_unused markings. Conversion of other drivers to these new macros ongoing. Features * adi,adf4350 - Switch from of specific to generic device properties enabling use with other firmware types. * adi,adx345 - Switch from of specific to generic device properties. - Add ACPI ID ADS0345 - Related driver cleanup. * adi,hmc425a - Switch from of specific to generic device properties. * afe analog rescaler driver - Wider range of types supported for scale. - Support offset. - Kunit tests. * atlas,ezo-sensor - Convert from of to device properties. * fsl,mma8452 - Support mount matrix. * infineon,dps310: - Add ACPI ID IFX3100. * invensense,mpu6050 - Convert to generic device properties. * maxim,ds1803 - Add out_raw_available before supporting more devices. - Convert from of specific to device properties. * samsung,ssp_sensors - Convert from of specific to device properties. * st,stm32-timer trigger - Convert from of specific to device properties. * ti,hdc101x - Add ACPI ID TXNW1010. * ti,tsc2046: - Add read_raw support to enable use of iio_hwmon and similar. Fixes / cleanup. * mailmap - Update for Cai Huoqing * MAINTAINERS - Fix Analog Devices related links. - Add entry for ADRF6780 - Add entry for ADMV1013 - Add entry for AD7293 - Add entry for ADMV8818 - Update files listed for adis-lib * iio core: - Fix wrong comment about current_mode being something a driver should ever access. - Use struct_size() rather than open coding in industrialio-hw-consumer * adi,axl355 - Use units.h definitions instead of local versions. * adi,adis-lib - Simplify *updated_bits() macro - Whitespace cleanup. * afe - Note many of these fixes only apply to particular configurations so the problems have probably not been seen in the wild, but will be visible with new usecases enabled this cycle. - Fix application of consumer scale for IIO_VAL_INT. - Apply a scale of 1 when no scale is provided. - Make best effort to establish a valid offset value for fractional cases. - Use s64 for scale calculations where parameters may be signed. - Tidy up include order. - Improve accuracy for small fractional sales - Reduce risk of integer overflow. * ams,as3935 - Use devm_delayed_work_autocancel() to replace open coded equivalent. * aspeed,adc - Fix wrong use of divider flag. * atmel,sama5d2-adc - Relax atmel,trigger-edge-type to optional. - Drop Ludovic Desroches from listed maintainers of the dt-binding inline with previous MAINTAINERS entry update. * fsl,mma8452 - Fix probing when i2c_device_id used. - dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev. Use dev_to_iio_dev() instead. Note the original path in here worked more by luck than design. * invensense,mpu6050 - Drop ACPI_PTR() protection to avoid an unused warning. - Use fact ACPI_COMPANION() returns null when ACPI_HANDLE() does to simplify handling. * motorola,cpcap-adc - Drop unused assignment. * qcom,spmi-adc - Fix wrong example of 'reg' in binding document. * renesas,rzg2l-adc - Trivial typo fix. * semtech,sx9360 - Fix wrong register handling for event generation. * st_sensors - Allow manual disabling of I2C or SPI module if not needed for a particular board. Default is still to enable the bus specific module if appropriate bus is supported. * st,lsm6dsx - dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev. Use dev_to_iio_dev() instead. * ti,palmas-gpadc - Split the interrupt fields in the dt-binding example * ti,tsc2046 - Rework state machine to improve readability after recent debugging of an issue fixed elsewhere. - Add a sanity check to avoid very large memory allocations if a crazy delay is specified. * ti,twl6030 - Add error handling if devm_request_threaded_irq() fails. * xilinx,ams - Use devm_delayed_work_autocancel() instead of open coding equivalent. - Fix missing required clock entry in dt-binding. - Fix miss counting of channels resulting in ps channels not being enabled. - Fix incorrect values written to sequencer registers. - Fix sequence for single channel reading. * tag 'iio-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (245 commits) iio: adc: xilinx-ams: Fix single channel switching sequence iio: adc: xilinx-ams: Fixed wrong sequencer register settings iio: adc: xilinx-ams: Fixed missing PS channels dt-bindings: iio: adc: zynqmp_ams: Add clock entry iio: accel: mma8452: use the correct logic to get mma8452_data iio: adc: aspeed: Add divider flag to fix incorrect voltage reading. iio: imu: st_lsm6dsx: use dev_to_iio_dev() to get iio_dev struct dt-bindings: iio: Add ltc2688 documentation iio: ABI: add ABI file for the LTC2688 DAC iio: dac: add support for ltc2688 dt-bindings: iio: afe: add bindings for temperature transducers dt-bindings: iio: afe: add bindings for temperature-sense-rtd iio: afe: rescale: add temperature transducers iio: afe: rescale: add RTD temperature sensor support iio: test: add basic tests for the iio-rescale driver iio: afe: rescale: reduce risk of integer overflow iio: afe: rescale: fix accuracy for small fractional scales iio: afe: rescale: add offset support iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support iio: afe: rescale: expose scale processing function ...

iio:magn:mmc35240: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc

2022-02-18T11:45:30Z

Letting the compiler remove these functions when the kernel is built without CONFIG_PM_SLEEP support is simpler and less error prone than the use of #ifdef based config guards. Also use SIMPLE_DEV_PM_OPS instead of open-coding the equivalent. Removing instances of this approach from IIO also stops them being copied into new drivers. Signed-off-by: Jonathan Cameron Reviewed-by: Paul Cercueil Link: https://lore.kernel.org/r/20220130193147.279148-32-jic23@kernel.org