linux-dev/drivers/iio/magnetometer, branch master

Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2022-10-08T15:56:37Z

Pull char/misc and other driver updates from Greg KH: "Here is the large set of char/misc and other small driver subsystem changes for 6.1-rc1. Loads of different things in here: - IIO driver updates, additions, and changes. Probably the largest part of the diffstat - habanalabs driver update with support for new hardware and features, the second largest part of the diff. - fpga subsystem driver updates and additions - mhi subsystem updates - Coresight driver updates - gnss subsystem updates - extcon driver updates - icc subsystem updates - fsi subsystem updates - nvmem subsystem and driver updates - misc driver updates - speakup driver additions for new features - lots of tiny driver updates and cleanups All of these have been in the linux-next tree for a while with no reported issues" * tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits) w1: Split memcpy() of struct cn_msg flexible array spmi: pmic-arb: increase SPMI transaction timeout delay spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes spmi: pmic-arb: correct duplicate APID to PPID mapping logic spmi: pmic-arb: add support to dispatch interrupt based on IRQ status spmi: pmic-arb: check apid against limits before calling irq handler spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq spmi: pmic-arb: handle spurious interrupt spmi: pmic-arb: add a print in cleanup_irq drivers: spmi: Directly use ida_alloc()/free() MAINTAINERS: add TI ECAP driver info counter: ti-ecap-capture: capture driver support for ECAP Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items dt-bindings: counter: add ti,am62-ecap-capture.yaml counter: Introduce the COUNTER_COMP_ARRAY component type counter: Consolidate Counter extension sysfs attribute creation counter: Introduce the Count capture component counter: 104-quad-8: Add Signal polarity component counter: Introduce the Signal polarity component counter: interrupt-cnt: Implement watch_validate callback ...

iio: magnetometer: yamaha-yas530: Use dev_err_probe()

2022-09-04T15:31:03Z

Unify error message format by using dev_err_probe(). Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220831141530.80572-3-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron

iio: magnetometer: yamaha-yas530: Make strings const in chip info

2022-09-04T15:31:03Z

For better compiler coverage mark strings consts in the chip info. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220831141530.80572-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron

iio: magnetometer: yamaha-yas530: Use pointers as driver data

2022-09-04T15:31:03Z

Unify ID tables to use pointers for driver data. It will allow to simplify the driver later on. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220831141530.80572-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron

i2c: Make remove callback return void

2022-08-16T10:46:26Z

The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin Reviewed-by: Jeremy Kerr Reviewed-by: Benjamin Mugnier Reviewed-by: Javier Martinez Canillas Reviewed-by: Crt Mori Reviewed-by: Heikki Krogerus Acked-by: Greg Kroah-Hartman Acked-by: Marek Behún # for leds-turris-omnia Acked-by: Andy Shevchenko Reviewed-by: Petr Machata # for mlxsw Reviewed-by: Maximilian Luz # for surface3_power Acked-by: Srinivas Pandruvada # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil # for media/* + staging/media/* Acked-by: Miguel Ojeda # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli # for versaclock5 Reviewed-by: Ajay Gupta # for ucsi_ccg Acked-by: Jonathan Cameron # for iio Acked-by: Peter Rosin # for i2c-mux-*, max9860 Acked-by: Adrien Grassein # for lontium-lt8912b Reviewed-by: Jean Delvare # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard # for IPMI Reviewed-by: Vladimir Oltean Acked-by: Dmitry Torokhov Acked-by: Sebastian Reichel # for drivers/power Acked-by: Krzysztof Hałasa Signed-off-by: Uwe Kleine-König Signed-off-by: Wolfram Sang

iio: magnetometer: yas530: Add YAS537 variant

2022-08-15T21:30:04Z

Add support for the magnetometer Yamaha YAS537. The additions are based on comparison of Yamaha Android kernel drivers for YAS532 [1] and YAS537 [2]. In the Yamaha YAS537 Android driver, there is an overflow/underflow control implemented. For regular usage, this seems not necessary. A similar overflow/ underflow control of Yamaha YAS530/532 Android driver isn't integrated in the mainline driver. It is therefore skipped for YAS537 in the mainline too. Also in the Yamaha YAS537 Android driver, at the end of the reset_yas537() function, a measurement is saved in "last_after_rcoil". Later on, this is compared to current measurements. If the difference gets too big, a new reset is initialized. The difference in measurements needs to be quite big, it's hard to say if this is necessary for regular operation. Therefore this isn't integrated in the mainline driver either. [1] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas532.c [2] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas537.c Signed-off-by: Jakob Hauser Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/264c6488733a5c32089c9ab406a5bcb808c48fef.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron

iio: magnetometer: yas530: Add function pointers to "chip_info"

2022-08-15T21:30:04Z

Add function pointers to the "chip_info" structure to ease the handling of different YAS variants. In the function yas5xx_probe(), the function call for "measure_offsets" was added as a conditional "if (ci->measure_offsets)". This is a preparatory step for YAS537, as this variant doesn't need an offset measurement. Signed-off-by: Jakob Hauser Reviewed-by: Andy Shevchenko Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/4bd3f96262e0132b7f9720521a801da3c18abd95.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron

iio: magnetometer: yas530: Add temperature calculation to "chip_info"

2022-08-15T21:30:04Z

Add temperature calculation to the "chip_info" structure to ease the handling of different YAS variants. Signed-off-by: Jakob Hauser Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/1a8bffdb7e807455620a73f2d61981e7f9aab8d5.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron

iio: magnetometer: yas530: Add IIO scaling to "chip_info"

2022-08-15T21:30:03Z

Add IIO scaling to the "chip_info" structure to ease the handling to different YAS variants. Signed-off-by: Jakob Hauser Reviewed-by: Andy Shevchenko Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/a12f892633bbee13a8856c231dc793ebbc5d3a03.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron

iio: magnetometer: yas530: Add volatile registers to "chip_info"

2022-08-15T21:30:03Z

Add volatile registers to the "chip_info" structure to ease the handling of different YAS variants. Signed-off-by: Jakob Hauser Reviewed-by: Andy Shevchenko Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/aeba3877933ba9d2c920b459a9037d9186c15a4f.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron