linux-dev/drivers/iio/pressure/Kconfig, branch master

iio: pressure: bmp280: Add support for BMP380 sensor family

2022-09-21T17:42:54Z

Adds compatibility with the new generation of this sensor, the BMP380. Includes basic sensor initialization to do pressure and temp measurements and allows tuning oversampling settings for each channel. The compensation algorithms are adapted from the device datasheet and the repository https://github.com/BoschSensortec/BMP3-Sensor-API. Signed-off-by: Angel Iglesias Link: https://lore.kernel.org/r/f1da2a2f1bc5bb083f318335c23b4f3d9bb8e536.1663025017.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron

iio: st_sensors: don't always auto-enable I2C and SPI interface drivers

2022-01-23T18:03:35Z

This patch makes I2C and SPI interface drivers for STMicroelectronics sensor chips individually selectable via Kconfig. The default is kept unchanged - I2C and SPI interface drivers are still selected by default if the corresponding bus support is available. However, the patch makes it possible to explicitly disable drivers that are not needed for a particular target. Signed-off-by: Nikita Yushchenko Acked-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220110152432.3799227-1-nikita.yoush@cogentembedded.com Signed-off-by: Jonathan Cameron

iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER

2021-05-10T13:01:48Z

During commit 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger"), the iio_triggered_buffer_{setup,cleanup}() functions got moved under the hid-sensor-trigger module. The above change works fine, if any of the sensors get built. However, when only the common hid-sensor-trigger module gets built (and none of the drivers), then the IIO_TRIGGERED_BUFFER symbol isn't selected/enforced. Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER gets selected. All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So, this change removes the IIO_TRIGGERED_BUFFER enforcement from each driver. Fixes: 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger") Reported-by: Thomas Deutschmann Cc: Srinivas Pandruvada Signed-off-by: Alexandru Ardelean Acked-by: Srinivas Pandruvada Link: https://lore.kernel.org/r/20210414084955.260117-1-aardelean@deviqon.com Signed-off-by: Jonathan Cameron

iio: pressure: icp10100: add driver for InvenSense ICP-101xx

2020-03-08T17:28:52Z

InvenSense ICP-101xx sensors are a family of barometric pressure and temperature sensor. These devices are I2C only and use a specific protocol of commands/responses. Data transfer is secured by using crc8. Driver provides processed pressure and raw temperature data. Signed-off-by: Jean-Baptiste Maneyrol Signed-off-by: Jonathan Cameron

iio: pressure: Add driver for DLH pressure sensors

2019-12-29T15:20:08Z

All Sensors DLH is series of low voltage digital pressure sensors. Additionally to pressure value sensors deliver a temperature value. Sensors can be accessed over I2C and SPI, this driver supports only I2C access. Signed-off-by: Tomislav Denis Signed-off-by: Jonathan Cameron

Merge tag 'iio-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2019-07-01T08:58:13Z

Jonathan writes: Second set of IIO device support, features, cleanups and minor fixes for 5.3. A few bits for the counters subsystem mixed in here as well. There are some late breaking fixes as well, which aren't so urgent they can't wait for the merge window. New Device Support * adf4371 - New driver + bindings. - Support the adf4372 PLL. Mostly ID and bindings. * ad8366 (note includes rework of driver needed to allow support for these). - Support the ADL5240 variable gain amplifier (VGA). - Support the ADA4961 digital gain amplifier (DGA). * dps310 - New driver, in several parts from different authors for this temp and pressure sensor. - Includes errata workaround for a temperature reading issue. * stk3310 - Support the stk3335, mostly ID. Features and cleanups * core - drop error handling on debugfs registration. - harden by making sure we don't overrun iio_chan_info_postfix. * docs - convert remaining docs to rst. At somepoint we'll fit these few into the main IIO docs. - improve sampling_frequency_available docs but explaining the range form. * ad_sigma_delta - Drop a pointless goto. * ad2s1210 - Drop pointless platform data null check seeing as we don't actually use platform data anymore. * ad7124 - Relax limitation on channel numbers to allow pseudo different channels. - Support control of whether the input is buffered via DT. - Use dynamic allocation for channel configuration to make it easier to support new devices. - YAML binding conversion. * ad7150 - Comment tidy up. - Consistent and simple if (ret) handling of i2c errors. - FIELD_GET and GENMASK. - Ternary rather than !!(condition) for readability. - Use macros to avoid repetition of channel definitions. * ad7606 - Add software channel config (rather that pin controlled) - Refactor to simplify addition of new part in future. * ad7746 - of_deivce_id table. * ad7780 - MAINTAINERS entry - YAML DT bindings. * ad8366 - Stop using core mlock in favour of well scoped local lock. - SPDX + copyright date update. * ad9834 - of_device_id table * adf4371 - Add support for output stage muting before lock on has occured. * adis library - MAINTAINERS entry to reflect that this now Alexandru's problem ;) * adis162xx: - Fix a slightly incorrect set of comments and print statements on minimum supported voltage. * adis16203 - of_device_id table. * adis16240 - Add of_device_id table (in two parts as first patch only used it for MODULE_DEVICE_TABLE.) * adt7316-spi - of_device_id table * adxl372 - YAML DT binding conversion. - Cleanup use of buffer callback functions (precursor to core rework). * bh1710 - Simplify getting the i2c adapter from the client. * dht11 - Mote to newer GPIO consumer interface. * kxcjk-1013.c - Add binding for sensor in display of some ultrabooks after userspace tools updated for it not be a problem to report two similar sensors. * imx7d - drop unused variables. - white space - define instead of variable for clock frequency that is fixed. - drop pointless error message. * messon_saradc - SPDX * sps30 - MAINTAINERS entry - YAML binding conversion. * st_accel - Tidy up ordering in various buffer related callbacks. This is part of a long running effort to simplify the core code. * stm32-dfsdm: - Manage the resolution cleanly in triggerd modes. - Add fast mode support which allows more flexible filter choices. - Add a comment on the reason for a 16 bit record when technically not 'required'. * st_lsm6dsx - Embed device name in the sensor_settings struct as i3c doesn't have a convenient name field to use for this. * xilinx-adc - Relax constraints on supported platforms to reflect that this can used with FPGAs on PCIe cards and hence many architectures. * counters/ftm-quaddec - Fix some formatting io MODULE_AUTHOR - MAINTAINERS entry Fixes * tools - fix incorrect handling of 32 bit channels. * sca3000 - Potential endian bug that is unlikely to bite anyone (be64 host seems unlikely for this old part). * stm32-adc - Add vdda-supply. On some boards it needs to be turned on to supply the ADC. DT bindings included. * stm32-dfsdm - Fix output resolution to work with filter orders other than 3. - Fix output datatype as it's signed and previously claimed not to be. * tag 'iio-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (68 commits) iio: iio-utils: Fix possible incorrect mask calculation iio: frequency: adf4371: Add support for output stage mute dt-bindings: iio: frequency: Add ADF4372 PLL documentation iio: frequency: adf4371: Add support for ADF4372 PLL dt-bindings: iio: adc: Add buffered input property Convert AD7124 bindings documentation to YAML format. iio: adc: ad7124: Shift to dynamic allocation for channel configuration iio: adc: ad7124: Add buffered input support iio: adc: ad7124: Remove input number limitation MAINTAINERS: add ADIS IMU driver library entry iio: adis162xx: fix low-power docs & reports counter/ftm-quaddec: Add missing '>' in MODULE_AUTHOR iio: core: no need to check return value of debugfs_create functions docs: iio: convert to ReST iio: adc: stm32-adc: add missing vdda-supply dt-bindings: iio: adc: stm32: add missing vdda supply iio: adc: stm32-dfsdm: add comment for 16 bits record iio: adc: stm32-dfsdm: add fast mode support iio: adc: stm32-dfsdm: manage data resolution in trigger mode iio: adc: stm32-dfsdm: fix data type ...

iio: Add driver for Infineon DPS310

2019-05-27T09:51:58Z

The DPS310 is a temperature and pressure sensor. It can be accessed over i2c and SPI, but this driver only supports polling over i2c. Signed-off-by: Eddie James Signed-off-by: Joel Stanley Signed-off-by: Jonathan Cameron

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

iio:st_pressure:initial lps22hh sensor support

2019-01-19T17:32:41Z

Initial support for ST LPS22HH pressure sensor. Datasheet: http://www2.st.com/resource/en/datasheet/lps22hh.pdf Features: * pressure, temperature data and timestamping channels * sampling frequency selection [1..200] Hz * interrupt based trigger * over I2C or SPI interface Signed-off-by: mario tesi Acked-by: Denis Ciocca Signed-off-by: Jonathan Cameron

iio: pressure: Fix name of BME280 part in Kconfig

2017-04-23T11:38:47Z

Bosch BME280 is a combined pressure and humidity sensor Signed-off-by: Peter Meerwald-Stadler Signed-off-by: Jonathan Cameron