linux-dev/drivers/infiniband/ulp/srpt, branch linus/master

scsi: target: srpt: Replace enable attr with ops.enable

2021-10-05T03:27:38Z

Remove tpg/enable attribute. Add fabric ops enable_tpg implementation instead. Link: https://lore.kernel.org/r/20210910084133.17956-6-d.bogdanov@yadro.com Reviewed-by: Roman Bolshakov Reviewed-by: Bart Van Assche Reviewed-by: Mike Christie Signed-off-by: Dmitry Bogdanov Signed-off-by: Martin K. Petersen

IB/srpt: Remove redundant assignment to ret

2021-05-11T16:42:17Z

Variable 'ret' is set to -ENOMEM but this value is never read as it is overwritten with a new value later on, hence it is a redundant assignment and can be removed In 'commit b79fafac70fc ("target: make queue_tm_rsp() return void")' srpt_queue_response() has been changed to return void, so after "goto out", there is no need to return ret. Clean up the following clang-analyzer warning: drivers/infiniband/ulp/srpt/ib_srpt.c:2860:3: warning: Value stored to 'ret' is never read [clang-analyzer-deadcode.DeadStores] Fixes: b99f8e4d7bcd ("IB/srpt: convert to the generic RDMA READ/WRITE API") Link: https://lore.kernel.org/r/1620296105-121964-1-git-send-email-yang.lee@linux.alibaba.com Reported-by: Abaci Robot Signed-off-by: Yang Li Reviewed-by: Leon Romanovsky Reviewed-by: Bart Van Assche Signed-off-by: Jason Gunthorpe

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2021-05-01T16:15:05Z

Pull rdma updates from Jason Gunthorpe: "This is significantly bug fixes and general cleanups. The noteworthy new features are fairly small: - XRC support for HNS and improves RQ operations - Bug fixes and updates for hns, mlx5, bnxt_re, hfi1, i40iw, rxe, siw and qib - Quite a few general cleanups on spelling, error handling, static checker detections, etc - Increase the number of device ports supported beyond 255. High port count software switches now exist - Several bug fixes for rtrs - mlx5 Device Memory support for host controlled atomics - Report SRQ tables through to rdma-tool" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (145 commits) IB/qib: Remove redundant assignment to ret RDMA/nldev: Add copy-on-fork attribute to get sys command RDMA/bnxt_re: Fix a double free in bnxt_qplib_alloc_res RDMA/siw: Fix a use after free in siw_alloc_mr IB/hfi1: Remove redundant variable rcd RDMA/nldev: Add QP numbers to SRQ information RDMA/nldev: Return SRQ information RDMA/restrack: Add support to get resource tracking for SRQ RDMA/nldev: Return context information RDMA/core: Add CM to restrack after successful attachment to a device RDMA/cma: Skip device which doesn't support CM RDMA/rxe: Fix a bug in rxe_fill_ip_info() RDMA/mlx5: Expose private query port RDMA/mlx4: Remove an unused variable RDMA/mlx5: Fix type assignment for ICM DM IB/mlx5: Set right RoCE l3 type and roce version while deleting GID RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails RDMA/cxgb4: add missing qpid increment IB/ipoib: Remove unnecessary struct declaration RDMA/bnxt_re: Get rid of custom module reference counting ...

RDMA/srpt: Fix error return code in srpt_cm_req_recv()

2021-04-12T23:18:35Z

Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: db7683d7deb2 ("IB/srpt: Fix login-related race conditions") Link: https://lore.kernel.org/r/20210408113132.87250-1-wangwensheng4@huawei.com Reported-by: Hulk Robot Signed-off-by: Wang Wensheng Reviewed-by: Bart Van Assche Signed-off-by: Jason Gunthorpe

RDMA: Support more than 255 rdma ports

2021-03-26T12:31:21Z

Current code uses many different types when dealing with a port of a RDMA device: u8, unsigned int and u32. Switch to u32 to clean up the logic. This allows us to make (at least) the core view consistent and use the same type. Unfortunately not all places can be converted. Many uverbs functions expect port to be u8 so keep those places in order not to break UAPIs. HW/Spec defined values must also not be changed. With the switch to u32 we now can support devices with more than 255 ports. U32_MAX is reserved to make control logic a bit easier to deal with. As a device with U32_MAX ports probably isn't going to happen any time soon this seems like a non issue. When a device with more than 255 ports is created uverbs will report the RDMA device as having 255 ports as this is the max currently supported. The verbs interface is not changed yet because the IBTA spec limits the port size in too many places to be u8 and all applications that relies in verbs won't be able to cope with this change. At this stage, we are extending the interfaces that are using vendor channel solely Once the limitation is lifted mlx5 in switchdev mode will be able to have thousands of SFs created by the device. As the only instance of an RDMA device that reports more than 255 ports will be a representor device and it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other ULPs aren't effected by this change and their sysfs/interfaces that are exposes to userspace can remain unchanged. While here cleanup some alignment issues and remove unneeded sanity checks (mainly in rdmavt), Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org Signed-off-by: Mark Bloch Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

scsi: target: core: Add gfp_t arg to target_cmd_init_cdb()

2021-03-04T22:37:02Z

tcm_loop could be used like a normal block device, so we can't use GFP_KERNEL and should use GFP_NOIO. This adds a gfp_t arg to target_cmd_init_cdb() and converts the users. For every driver but loop GFP_KERNEL is kept. This will also be useful in subsequent patches where loop needs to do target_submit_prep() from interrupt context to get a ref to the se_device, and so it will need to use GFP_ATOMIC. Link: https://lore.kernel.org/r/20210227170006.5077-16-michael.christie@oracle.com Tested-by: Laurence Oberman Reviewed-by: Christoph Hellwig Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen

scsi: target: srpt: Convert to new submission API

2021-03-04T22:37:00Z

target_submit_cmd_map_sgls() is being removed, so convert srpt to the new submission API. srpt uses target_stop_session() to sync session shutdown with LIO core, so we use target_init_cmd()/target_submit_prep()/target_submit(), because target_init_cmd() will detect the target_stop_session() call and return an error. Link: https://lore.kernel.org/r/20210227170006.5077-6-michael.christie@oracle.com Cc: Bart Van Assche Reviewed-by: Christoph Hellwig Reviewed-by: Bart Van Assche Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2020-12-16T21:42:26Z

Pull rdma updates from Jason Gunthorpe: "A smaller set of patches, nothing stands out as being particularly major this cycle. The biggest item would be the new HIP09 HW support from HNS, otherwise it was pretty quiet for new work here: - Driver bug fixes and updates: bnxt_re, cxgb4, rxe, hns, i40iw, cxgb4, mlx4 and mlx5 - Bug fixes and polishing for the new rts ULP - Cleanup of uverbs checking for allowed driver operations - Use sysfs_emit all over the place - Lots of bug fixes and clarity improvements for hns - hip09 support for hns - NDR and 50/100Gb signaling rates - Remove dma_virt_ops and go back to using the IB DMA wrappers - mlx5 optimizations for contiguous DMA regions" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (147 commits) RDMA/cma: Don't overwrite sgid_attr after device is released RDMA/mlx5: Fix MR cache memory leak RDMA/rxe: Use acquire/release for memory ordering RDMA/hns: Simplify AEQE process for different types of queue RDMA/hns: Fix inaccurate prints RDMA/hns: Fix incorrect symbol types RDMA/hns: Clear redundant variable initialization RDMA/hns: Fix coding style issues RDMA/hns: Remove unnecessary access right set during INIT2INIT RDMA/hns: WARN_ON if get a reserved sl from users RDMA/hns: Avoid filling sl in high 3 bits of vlan_id RDMA/hns: Do shift on traffic class when using RoCEv2 RDMA/hns: Normalization the judgment of some features RDMA/hns: Limit the length of data copied between kernel and userspace RDMA/mlx4: Remove bogus dev_base_lock usage RDMA/uverbs: Fix incorrect variable type RDMA/core: Do not indicate device ready when device enablement fails RDMA/core: Clean up cq pool mechanism RDMA/core: Update kernel documentation for ib_create_named_qp() MAINTAINERS: SOFT-ROCE: Change Zhu Yanjun's email address ...

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2020-12-16T21:34:31Z

Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, qla2xxx, smartpqi, target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major power management rework and a load of assorted minor updates. There are a few core updates (formatting fixes being the big one) but nothing major this cycle" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: mpt3sas: Update driver version to 36.100.00.00 scsi: mpt3sas: Handle trigger page after firmware update scsi: mpt3sas: Add persistent MPI trigger page scsi: mpt3sas: Add persistent SCSI sense trigger page scsi: mpt3sas: Add persistent Event trigger page scsi: mpt3sas: Add persistent Master trigger page scsi: mpt3sas: Add persistent trigger pages support scsi: mpt3sas: Sync time periodically between driver and firmware scsi: qla2xxx: Update version to 10.02.00.104-k scsi: qla2xxx: Fix device loss on 4G and older HBAs scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retry scsi: qla2xxx: Fix the call trace for flush workqueue scsi: qla2xxx: Fix flash update in 28XX adapters on big endian machines scsi: qla2xxx: Handle aborts correctly for port undergoing deletion scsi: qla2xxx: Fix N2N and NVMe connect retry failure scsi: qla2xxx: Fix FW initialization error on big endian machines scsi: qla2xxx: Fix crash during driver load on big endian machines scsi: qla2xxx: Fix compilation issue in PPC systems scsi: qla2xxx: Don't check for fw_started while posting NVMe command scsi: qla2xxx: Tear down session if FW say it is down ...

IB: Fix kernel-doc markups

2020-12-07T19:45:00Z

Some functions have different names between their prototypes and the kernel-doc markup. Others need to be fixed, as kernel-doc markups should use this format: identifier - description Link: https://lore.kernel.org/r/78b98c41a5a0f4c0106433d305b143028a4168b0.1606823973.git.mchehab+huawei@kernel.org Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Jason Gunthorpe