linux-dev/drivers/media/cec/usb, branch master

media: pulse8-cec: add support for FW v10 and up

2020-12-01T15:20:02Z

Starting with firmware version 10 the GET/SET_HDMI_VERSION message was removed and GET/SET_AUTO_POWER_ON was added. The removal of GET/SET_HDMI_VERSION caused the probe of the Pulse-Eight to fail. Add a version check to handle this gracefully. Also show (but do not set) the Auto Power On value. Signed-off-by: Hans Verkuil Reported-by: Maxime Ripard Tested-by: Maxime Ripard Cc: Signed-off-by: Mauro Carvalho Chehab

media: pulse8-cec: fix duplicate free at disconnect or probe error

2020-12-01T15:19:07Z

Commit 601282d65b96 ("media: pulse8-cec: use adap_free callback") used the adap_free callback to clean up on disconnect. What I forgot was that in the probe it will call cec_delete_adapter() followed by kfree(pulse8) if an error occurs. But by using the adap_free callback, cec_delete_adapter() is already freeing the pulse8 struct. This wasn't noticed since normally the probe works fine, but Pulse-Eight published a new firmware version that caused a probe error, so now it hits this bug. This affects firmware version 12, but probably any version >= 10. Commit aa9eda76129c ("media: pulse8-cec: close serio in disconnect, not adap_free") made this worse by adding the line 'pulse8->serio = NULL' right after the call to cec_unregister_adapter in the disconnect() function. Unfortunately, cec_unregister_adapter will typically call cec_delete_adapter (unless a filehandle to the cec device is still open), which frees the pulse8 struct. So now it will also crash on a simple unplug of the Pulse-Eight device. With this fix both the unplug issue and a probe() error situation are handled correctly again. It will still fail to probe() with a v12 firmware, that's something to look at separately. Signed-off-by: Hans Verkuil Reported-by: Maxime Ripard Tested-by: Maxime Ripard Fixes: aa9eda76129c ("media: pulse8-cec: close serio in disconnect, not adap_free") Fixes: 601282d65b96 ("media: pulse8-cec: use adap_free callback") Cc: Signed-off-by: Mauro Carvalho Chehab

media: Use fallthrough pseudo-keyword

2020-08-29T06:35:27Z

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva Acked-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

Merge tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2020-06-04T03:59:38Z

Pull media updates from Mauro Carvalho Chehab: - Media documentation is now split into admin-guide, driver-api and userspace-api books (a longstanding request from Jon); - The media Kconfig was reorganized, in order to make easier to select drivers and their dependencies; - The testing drivers now has a separate directory; - added a new driver for Rockchip Video Decoder IP; - The atomisp staging driver was resurrected. It is meant to work with 4 generations of cameras on Atom-based laptops, tablets and cell phones. So, it seems worth investing time to cleanup this driver and making it in good shape. - Added some V4L2 core ancillary routines to help with h264 codecs; - Added an ov2740 image sensor driver; - The si2157 gained support for Analog TV, which, in turn, added support for some cx231xx and cx23885 boards to also support analog standards; - Added some V4L2 controls (V4L2_CID_CAMERA_ORIENTATION and V4L2_CID_CAMERA_SENSOR_ROTATION) to help identifying where the camera is located at the device; - VIDIOC_ENUM_FMT was extended to support MC-centric devices; - Lots of drivers improvements and cleanups. * tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (503 commits) media: Documentation: media: Refer to mbus format documentation from CSI-2 docs media: s5k5baf: Replace zero-length array with flexible-array media: i2c: imx219: Drop and media: i2c: Add ov2740 image sensor driver media: ov8856: Implement sensor module revision identification media: ov8856: Add devicetree support media: dt-bindings: ov8856: Document YAML bindings media: dvb-usb: Add Cinergy S2 PCIe Dual Port support media: dvbdev: Fix tuner->demod media controller link media: dt-bindings: phy: phy-rockchip-dphy-rx0: move rockchip dphy rx0 bindings out of staging media: staging: dt-bindings: phy-rockchip-dphy-rx0: remove non-used reg property media: atomisp: unify the version for isp2401 a0 and b0 versions media: atomisp: update TODO with the current data media: atomisp: adjust some code at sh_css that could be broken media: atomisp: don't produce errs for ignored IRQs media: atomisp: print IRQ when debugging media: atomisp: isp_mmu: don't use kmem_cache media: atomisp: add a notice about possible leak resources media: atomisp: disable the dynamic and reserved pools media: atomisp: turn on camera before setting it ...

media: cec/usb: depends on USB_SUPPORT and TTY

2020-04-17T07:04:55Z

As reported by Randy: WARNING: unmet direct dependencies detected for USB Depends on [n]: USB_SUPPORT [=n] && USB_ARCH_HAS_HCD [=n] Selected by [m]: - USB_RAINSHADOW_CEC [=m] && MEDIA_CEC_SUPPORT [=y] WARNING: unmet direct dependencies detected for USB_ACM Depends on [n]: USB_SUPPORT [=n] && USB [=m] && TTY [=n] Selected by [m]: - USB_RAINSHADOW_CEC [=m] && MEDIA_CEC_SUPPORT [=y] in order to be able to select USB_ACM, we need both USB_SUPPORT and TTY. So, depends on those two. Reported-by: Randy Dunlap Signed-off-by: Mauro Carvalho Chehab

media: move CEC USB drivers to a separate directory

2020-04-15T10:06:40Z

As CEC support doesn't depend on MEDIA_SUPPORT, let's place the platform drivers outside the media menu. As a side effect, instead of depends on USB, drivers just select it. Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab