linux-dev/drivers/media/dvb-frontends/si2168.c, branch linus/master

media: media si2168: Fix spelling mistake "previsously" -> "previously"

2021-12-07T10:29:57Z

There is a spelling mistake in a dev_dbg message. Fix it. Link: https://lore.kernel.org/linux-media/20211123090645.165299-1-colin.i.king@gmail.com Cc: kernel-janitors@vger.kernel.org, linux-kernel@vger.kernel.org Signed-off-by: Colin Ian King Signed-off-by: Mauro Carvalho Chehab

media: media si2168: fully initialize si2168 on resume only when necessary

2021-11-19T16:38:38Z

At connection time (or boot) in si2168_probe(), the firmware is not loaded to the device and the device is not fully activated. It is not useful or sensible to do this full initialization on resume in case it has not been previously initialized and is expected to be in this initialized state. Calling si2168_init() and therefore reading the firmware file for the first time during resume leads to problems and should be avoided. It is however safe to read the firmware file once it has already been read outside of a suspend/resume situation. Add a staus flag 'initialized' to store whether si2168_init() has successfully been called. If initialization fails (e.g. due to missing firmware file), the flag is not set. Register a separate si2168_resume callback which only calls si2168_init() once the 'initialized' flag has been set and it is safe to load the firmware at resume. The first call to si2168_init() will now always happen when the device is actually used for the first time and never during resume. This avoids the unsafe firmware file reading and should also speed up resume by skipping unnecessary device initialization. Link: https://lore.kernel.org/linux-media/20210418001204.7453-3-kernel@tuxforce.de [mchehab: fix several Coding Style issues] Cc: Antti Palosaari Signed-off-by: Lukas Middendorf Signed-off-by: Mauro Carvalho Chehab

media: si2168: drop support for old firmware file name for si2168 B40

2021-11-19T16:32:25Z

The si2168 B40 firmware file name has been changed in or before 2014. During initialization, the new file name is preferred, but the old file name is used as a fallback when request_firmware with the new file name fails. Once reading the old file name has been attempted, only this name will be used on further firmware loading attempts. During resume, firmware reading with the new file name can (and likely will) fail even when it actually exists. So this permanent switch to the fallback firmware name happens even when not desired. Any system using a recent kernel version can be expected to have the firmware under the new name. The major distributions are either using the dvb firmware collection from LibreELEC, which has the new firmware file name, or do not package the firmware file but have documentation pointing towards a manual installation of the firmware file under the new name. If the firmware is available under the old name, it is severely outdated. If the switch to the old file name is performed, further firmware loading will either permanently fail (if it is not available) or an outdated firmware version will be used. Drop support for the fallback firmware file name and fail directly if the firmware is not available under its current name. On following attempts, the firmware read will then be retried with the correct current name instead of the old name. As reasoned above, there should be no negative effects of this change, while simplifying code (the B40 variant will be handled identical compared to the other variants of the si2168) and at the same time fixing possible problems if firmware loading fails on resume. Link: https://lore.kernel.org/linux-media/20210418161544.58858-1-kernel@tuxforce.de Signed-off-by: Lukas Middendorf Signed-off-by: Mauro Carvalho Chehab

media: si2168: Refactor command setup code

2019-08-21T21:39:54Z

Use cmd_init() to fill a struct si2168_cmd command. Signed-off-by: Marc Gonzalez Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

media: si2168: add support for Mygica T230C v2

2019-07-22T19:30:28Z

The T230C v2 hardware needs a mode of the si2168 chip to be set for which the si2168 driver previously had no support. This patch uses a specific measure to configure this on the T230C v2 hardware only - see the flag passed via the ts_mode attribute and its dependency on USB_PID_MYGICA_T230C2. Signed-off-by: Jan Pieter van Woerkom Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

Merge tag 'v5.2-rc4' into media/master

2019-06-11T16:09:28Z

There are some conflicts due to SPDX changes. We also have more patches being merged via media tree touching them. So, let's merge back from upstream and address those. Linux 5.2-rc4 * tag 'v5.2-rc4': (767 commits) Linux 5.2-rc4 MAINTAINERS: Karthikeyan Ramasubramanian is MIA i2c: xiic: Add max_read_len quirk lockref: Limit number of cmpxchg loop retries uaccess: add noop untagged_addr definition x86/insn-eval: Fix use-after-free access to LDT entry kbuild: use more portable 'command -v' for cc-cross-prefix s390/unwind: correct stack switching during unwind block, bfq: add weight symlink to the bfq.weight cgroup parameter cgroup: let a symlink too be created with a cftype file drm/nouveau/secboot/gp10[2467]: support newer FW to fix SEC2 failures on some boards drm/nouveau/secboot: enable loading of versioned LS PMU/SEC2 ACR msgqueue FW drm/nouveau/secboot: split out FW version-specific LS function pointers drm/nouveau/secboot: pass max supported FW version to LS load funcs drm/nouveau/core: support versioned firmware loading drm/nouveau/core: pass subdev into nvkm_firmware_get, rather than device block: free sched's request pool in blk_cleanup_queue pktgen: do not sleep with the thread lock held. net: mvpp2: Use strscpy to handle stat strings net: rds: fix memory leak in rds_ib_flush_mr_pool ... Signed-off-by: Mauro Carvalho Chehab

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157

2019-05-30T18:26:37Z

Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Reviewed-by: Kate Stewart Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman

media: si2168: add frequency data to frontend info

2019-05-21T13:06:14Z

Minimum, maximum, and stepsize taken from Silicon Labs reference. Signed-off-by: Brad Love Signed-off-by: Mauro Carvalho Chehab

media: si2168: fix a comment about firmware version

2018-03-08T11:06:49Z

There's a comment there at s82168 that it is wrong. With firmware 4.0.11, sleep/resume works well without need of download it every time. But firmware 4.0.19 needs to be downloaded again after sleep. Signed-off-by: Mauro Carvalho Chehab

media: si2168: change ts bus control logic

2018-03-06T14:12:32Z

Move the ts bus control function moved higher, enabling it after configuring frontend and removeing ts_bus_ctrl callback. While here, also add an error checking and re-add a comment that were removed by commit 445877742ce3 ("media: si2168: Add ts bus coontrol, turn off bus on sleep"). [mchehab@s-opensource.com: I ended by applying the first version, instead of the right one. So, this patch contains the diff and the v2 changelog instead] Fixes: 445877742ce3 ("media: si2168: Add ts bus coontrol, turn off bus on sleep") Signed-off-by: Brad Love Signed-off-by: Mauro Carvalho Chehab